Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965056AbXADSzE (ORCPT ); Thu, 4 Jan 2007 13:55:04 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932122AbXADSxk (ORCPT ); Thu, 4 Jan 2007 13:53:40 -0500 Received: from mailout.stusta.mhn.de ([141.84.69.5]:2904 "HELO mailout.stusta.mhn.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1750959AbXADSxV (ORCPT ); Thu, 4 Jan 2007 13:53:21 -0500 Date: Thu, 4 Jan 2007 19:53:23 +0100 From: Adrian Bunk To: mchehab@infradead.org Cc: v4l-dvb-maintainer@linuxtv.org, benh@kernel.crashing.org, linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org Subject: [RFC: 2.6 patch] remove the broken VIDEO_PLANB driver Message-ID: <20070104185323.GF20714@stusta.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 79811 Lines: 2718 The VIDEO_PLANB driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk --- drivers/media/video/Kconfig | 11 drivers/media/video/Makefile | 1 drivers/media/video/planb.c | 2304 ---------------------------------- drivers/media/video/planb.h | 231 --- drivers/media/video/saa7196.h | 117 - 5 files changed, 2664 deletions(-) --- linux-2.6.20-rc2-mm1/drivers/media/video/Kconfig.old 2007-01-04 17:49:44.000000000 +0100 +++ linux-2.6.20-rc2-mm1/drivers/media/video/Kconfig 2007-01-04 17:49:55.000000000 +0100 @@ -375,17 +375,6 @@ To compile this driver as a module, choose M here: the module will be called pms. -config VIDEO_PLANB - tristate "PlanB Video-In on PowerMac" - depends on PPC_PMAC && VIDEO_V4L1 && BROKEN - help - PlanB is the V4L driver for the PowerMac 7x00/8x00 series video - input hardware. If you want to experiment with this, say Y. - Otherwise, or if you don't understand a word, say N. See - for more info. - - Saying M will compile this driver as a module (planb). - config VIDEO_BWQCAM tristate "Quickcam BW Video For Linux" depends on PARPORT && VIDEO_V4L1 --- linux-2.6.20-rc2-mm1/drivers/media/video/Makefile.old 2007-01-04 17:50:03.000000000 +0100 +++ linux-2.6.20-rc2-mm1/drivers/media/video/Makefile 2007-01-04 17:50:07.000000000 +0100 @@ -52,7 +52,6 @@ obj-$(CONFIG_VIDEO_ZORAN_ZR36060) += zr36060.o obj-$(CONFIG_VIDEO_PMS) += pms.o -obj-$(CONFIG_VIDEO_PLANB) += planb.o obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o obj-$(CONFIG_VIDEO_STRADIS) += stradis.o obj-$(CONFIG_VIDEO_CPIA) += cpia.o --- linux-2.6.20-rc2-mm1/drivers/media/video/saa7196.h 2006-11-29 22:57:37.000000000 +0100 +++ /dev/null 2006-09-19 00:45:31.000000000 +0200 @@ -1,117 +0,0 @@ -/* - Definitions for the Philips SAA7196 digital video decoder, - scaler, and clock generator circuit (DESCpro), as used in - the PlanB video input of the Powermac 7x00/8x00 series. - - Copyright (C) 1998 Michel Lanners (mlan@cpu.lu) - - The register defines are shamelessly copied from the meteor - driver out of NetBSD (with permission), - and are copyrighted (c) 1995 Mark Tinguely and Jim Lowe - (Thanks !) - - Additional debugging and coding by Takashi Oe (toe@unlinfo.unl.edu) - - The default values used for PlanB are my mistakes. -*/ - -/* $Id: saa7196.h,v 1.5 1999/03/26 23:28:47 mlan Exp $ */ - -#ifndef _SAA7196_H_ -#define _SAA7196_H_ - -#define SAA7196_NUMREGS 0x31 /* Number of registers (used)*/ -#define NUM_SUPPORTED_NORM 3 /* Number of supported norms by PlanB */ - -/* Decoder part: */ -#define SAA7196_IDEL 0x00 /* Increment delay */ -#define SAA7196_HSB5 0x01 /* H-sync begin; 50 hz */ -#define SAA7196_HSS5 0x02 /* H-sync stop; 50 hz */ -#define SAA7196_HCB5 0x03 /* H-clamp begin; 50 hz */ -#define SAA7196_HCS5 0x04 /* H-clamp stop; 50 hz */ -#define SAA7196_HSP5 0x05 /* H-sync after PHI1; 50 hz */ -#define SAA7196_LUMC 0x06 /* Luminance control */ -#define SAA7196_HUEC 0x07 /* Hue control */ -#define SAA7196_CKTQ 0x08 /* Colour Killer Threshold QAM (PAL, NTSC) */ -#define SAA7196_CKTS 0x09 /* Colour Killer Threshold SECAM */ -#define SAA7196_PALS 0x0a /* PAL switch sensitivity */ -#define SAA7196_SECAMS 0x0b /* SECAM switch sensitivity */ -#define SAA7196_CGAINC 0x0c /* Chroma gain control */ -#define SAA7196_STDC 0x0d /* Standard/Mode control */ -#define SAA7196_IOCC 0x0e /* I/O and Clock Control */ -#define SAA7196_CTRL1 0x0f /* Control #1 */ -#define SAA7196_CTRL2 0x10 /* Control #2 */ -#define SAA7196_CGAINR 0x11 /* Chroma Gain Reference */ -#define SAA7196_CSAT 0x12 /* Chroma Saturation */ -#define SAA7196_CONT 0x13 /* Luminance Contrast */ -#define SAA7196_HSB6 0x14 /* H-sync begin; 60 hz */ -#define SAA7196_HSS6 0x15 /* H-sync stop; 60 hz */ -#define SAA7196_HCB6 0x16 /* H-clamp begin; 60 hz */ -#define SAA7196_HCS6 0x17 /* H-clamp stop; 60 hz */ -#define SAA7196_HSP6 0x18 /* H-sync after PHI1; 60 hz */ -#define SAA7196_BRIG 0x19 /* Luminance Brightness */ - -/* Scaler part: */ -#define SAA7196_FMTS 0x20 /* Formats and sequence */ -#define SAA7196_OUTPIX 0x21 /* Output data pixel/line */ -#define SAA7196_INPIX 0x22 /* Input data pixel/line */ -#define SAA7196_HWS 0x23 /* Horiz. window start */ -#define SAA7196_HFILT 0x24 /* Horiz. filter */ -#define SAA7196_OUTLINE 0x25 /* Output data lines/field */ -#define SAA7196_INLINE 0x26 /* Input data lines/field */ -#define SAA7196_VWS 0x27 /* Vertical window start */ -#define SAA7196_VYP 0x28 /* AFS/vertical Y processing */ -#define SAA7196_VBS 0x29 /* Vertical Bypass start */ -#define SAA7196_VBCNT 0x2a /* Vertical Bypass count */ -#define SAA7196_VBP 0x2b /* veritcal Bypass Polarity */ -#define SAA7196_VLOW 0x2c /* Colour-keying lower V limit */ -#define SAA7196_VHIGH 0x2d /* Colour-keying upper V limit */ -#define SAA7196_ULOW 0x2e /* Colour-keying lower U limit */ -#define SAA7196_UHIGH 0x2f /* Colour-keying upper U limit */ -#define SAA7196_DPATH 0x30 /* Data path setting */ - -/* Initialization default values: */ - -unsigned char saa_regs[NUM_SUPPORTED_NORM][SAA7196_NUMREGS] = { - -/* PAL, 768x576 (no scaling), composite video-in */ -/* Decoder: */ - { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x63, 0xff, - 0xfe, 0xf0, 0xfe, 0xe0, 0x20, 0x06, 0x3b, 0x98, - 0x00, 0x59, 0x41, 0x45, 0x34, 0x0a, 0xf4, 0xd2, - 0xe9, 0xa2, -/* Padding */ - 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, -/* Scaler: */ - 0x72, 0x80, 0x00, 0x03, 0x8d, 0x20, 0x20, 0x12, - 0xa5, 0x12, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, - 0x87 }, - -/* NTSC, 640x480? (no scaling), composite video-in */ -/* Decoder: */ - { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x50, 0x00, - 0xf8, 0xf0, 0xfe, 0xe0, 0x00, 0x06, 0x3b, 0x98, - 0x00, 0x2c, 0x3d, 0x40, 0x34, 0x0a, 0xf4, 0xd2, - 0xe9, 0x98, -/* Padding */ - 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, -/* Scaler: */ - 0x72, 0x80, 0x80, 0x03, 0x89, 0xf0, 0xf0, 0x0d, - 0xa0, 0x0d, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, - 0x87 }, - -/* SECAM, 768x576 (no scaling), composite video-in */ -/* Decoder: */ - { 0x50, 0x30, 0x00, 0xe8, 0xb6, 0xe5, 0x63, 0xff, - 0xfe, 0xf0, 0xfe, 0xe0, 0x20, 0x07, 0x3b, 0x98, - 0x00, 0x59, 0x41, 0x45, 0x34, 0x0a, 0xf4, 0xd2, - 0xe9, 0xa2, -/* Padding */ - 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, -/* Scaler: */ - 0x72, 0x80, 0x00, 0x03, 0x8d, 0x20, 0x20, 0x12, - 0xa5, 0x12, 0x00, 0x00, 0x04, 0x00, 0x04, 0x00, - 0x87 } - }; - -#endif /* _SAA7196_H_ */ --- linux-2.6.20-rc2-mm1/drivers/media/video/planb.h 2006-11-29 22:57:37.000000000 +0100 +++ /dev/null 2006-09-19 00:45:31.000000000 +0200 @@ -1,231 +0,0 @@ -/* - planb - PlanB frame grabber driver - - PlanB is used in the 7x00/8x00 series of PowerMacintosh - Computers as video input DMA controller. - - Copyright (C) 1998 Michel Lanners (mlan@cpu.lu) - - Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de) - - Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu) - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* $Id: planb.h,v 1.13 1999/05/03 19:28:56 mlan Exp $ */ - -#ifndef _PLANB_H_ -#define _PLANB_H_ - -#ifdef __KERNEL__ -#include -#include "saa7196.h" -#endif /* __KERNEL__ */ - -#define PLANB_DEVICE_NAME "Apple PlanB Video-In" -#define PLANB_REV "1.0" - -#ifdef __KERNEL__ -//#define PLANB_GSCANLINE /* use this if apps have the notion of */ - /* grab buffer scanline */ -/* This should be safe for both PAL and NTSC */ -#define PLANB_MAXPIXELS 768 -#define PLANB_MAXLINES 576 -#define PLANB_NTSC_MAXLINES 480 - -/* Uncomment your preferred norm ;-) */ -#define PLANB_DEF_NORM VIDEO_MODE_PAL -//#define PLANB_DEF_NORM VIDEO_MODE_NTSC -//#define PLANB_DEF_NORM VIDEO_MODE_SECAM - -/* fields settings */ -#define PLANB_GRAY 0x1 /* 8-bit mono? */ -#define PLANB_COLOUR15 0x2 /* 16-bit mode */ -#define PLANB_COLOUR32 0x4 /* 32-bit mode */ -#define PLANB_CLIPMASK 0x8 /* hardware clipmasking */ - -/* misc. flags for PlanB DMA operation */ -#define CH_SYNC 0x1 /* synchronize channels (set by ch1; - cleared by ch2) */ -#define FIELD_SYNC 0x2 /* used for the start of each field - (0 -> 1 -> 0 for ch1; 0 -> 1 for ch2) */ -#define EVEN_FIELD 0x0 /* even field is detected if unset */ -#define DMA_ABORT 0x2 /* error or just out of sync if set */ -#define ODD_FIELD 0x4 /* odd field is detected if set */ - -/* for capture operations */ -#define MAX_GBUFFERS 2 -/* note PLANB_MAX_FBUF must be divisible by PAGE_SIZE */ -#ifdef PLANB_GSCANLINE -#define PLANB_MAX_FBUF 0x240000 /* 576 * 1024 * 4 */ -#define TAB_FACTOR (1) -#else -#define PLANB_MAX_FBUF 0x1b0000 /* 576 * 768 * 4 */ -#define TAB_FACTOR (2) -#endif -#endif /* __KERNEL__ */ - -struct planb_saa_regs { - unsigned char addr; - unsigned char val; -}; - -struct planb_stat_regs { - unsigned int ch1_stat; - unsigned int ch2_stat; - unsigned char saa_stat0; - unsigned char saa_stat1; -}; - -struct planb_any_regs { - unsigned int offset; - unsigned int bytes; - unsigned char data[128]; -}; - -/* planb private ioctls */ -#define PLANBIOCGSAAREGS _IOWR('v', BASE_VIDIOCPRIVATE, struct planb_saa_regs) /* Read a saa7196 reg value */ -#define PLANBIOCSSAAREGS _IOW('v', BASE_VIDIOCPRIVATE + 1, struct planb_saa_regs) /* Set a saa7196 reg value */ -#define PLANBIOCGSTAT _IOR('v', BASE_VIDIOCPRIVATE + 2, struct planb_stat_regs) /* Read planb status */ -#define PLANB_TV_MODE 1 -#define PLANB_VTR_MODE 2 -#define PLANBIOCGMODE _IOR('v', BASE_VIDIOCPRIVATE + 3, int) /* Get TV/VTR mode */ -#define PLANBIOCSMODE _IOW('v', BASE_VIDIOCPRIVATE + 4, int) /* Set TV/VTR mode */ - -#ifdef PLANB_GSCANLINE -#define PLANBG_GRAB_BPL _IOR('v', BASE_VIDIOCPRIVATE + 5, int) /* # of bytes per scanline in grab buffer */ -#endif - -/* call wake_up_interruptible() with appropriate actions */ -#define PLANB_INTR_DEBUG _IOW('v', BASE_VIDIOCPRIVATE + 20, int) -/* investigate which reg does what */ -#define PLANB_INV_REGS _IOWR('v', BASE_VIDIOCPRIVATE + 21, struct planb_any_regs) - -#ifdef __KERNEL__ - -/* Potentially useful macros */ -#define PLANB_SET(x) ((x) << 16 | (x)) -#define PLANB_CLR(x) ((x) << 16) - -/* This represents the physical register layout */ -struct planb_registers { - volatile struct dbdma_regs ch1; /* 0x00: video in */ - volatile unsigned int even; /* 0x40: even field setting */ - volatile unsigned int odd; /* 0x44; odd field setting */ - unsigned int pad1[14]; /* empty? */ - volatile struct dbdma_regs ch2; /* 0x80: clipmask out */ - unsigned int pad2[16]; /* 0xc0: empty? */ - volatile unsigned int reg3; /* 0x100: ???? */ - volatile unsigned int intr_stat; /* 0x104: irq status */ -#define PLANB_CLR_IRQ 0x00 /* clear Plan B interrupt */ -#define PLANB_GEN_IRQ 0x01 /* assert Plan B interrupt */ -#define PLANB_FRM_IRQ 0x0100 /* end of frame */ - unsigned int pad3[1]; /* empty? */ - volatile unsigned int reg5; /* 0x10c: ??? */ - unsigned int pad4[60]; /* empty? */ - volatile unsigned char saa_addr; /* 0x200: SAA subadr */ - char pad5[3]; - volatile unsigned char saa_regval; /* SAA7196 write reg. val */ - char pad6[3]; - volatile unsigned char saa_status; /* SAA7196 status byte */ - /* There is more unused stuff here */ -}; - -struct planb_window { - int x, y; - ushort width, height; - ushort bpp, bpl, depth, pad; - ushort swidth, sheight; - int norm; - int interlace; - u32 color_fmt; - int chromakey; - int mode; /* used to switch between TV/VTR modes */ -}; - -struct planb_suspend { - int overlay; - int frame; - struct dbdma_cmd cmd; -}; - -struct planb { - struct video_device video_dev; - struct video_picture picture; /* Current picture params */ - struct video_audio audio_dev; /* Current audio params */ - - volatile struct planb_registers *planb_base; /* virt base of planb */ - struct planb_registers *planb_base_phys; /* phys base of planb */ - void *priv_space; /* Org. alloc. mem for kfree */ - int user; - unsigned int tab_size; - int maxlines; - struct mutex lock; - unsigned int irq; /* interrupt number */ - volatile unsigned int intr_mask; - - int overlay; /* overlay running? */ - struct planb_window win; - unsigned long frame_buffer_phys; /* We need phys for DMA */ - int offset; /* offset of pixel 1 */ - volatile struct dbdma_cmd *ch1_cmd; /* Video In DMA cmd buffer */ - volatile struct dbdma_cmd *ch2_cmd; /* Clip Out DMA cmd buffer */ - volatile struct dbdma_cmd *overlay_last1; - volatile struct dbdma_cmd *overlay_last2; - unsigned long ch1_cmd_phys; - volatile unsigned char *mask; /* Clipmask buffer */ - int suspend; - wait_queue_head_t suspendq; - struct planb_suspend suspended; - int cmd_buff_inited; /* cmd buffer inited? */ - - int grabbing; - unsigned int gcount; - wait_queue_head_t capq; - int last_fr; - int prev_last_fr; - unsigned char **rawbuf; - int rawbuf_size; - int gbuf_idx[MAX_GBUFFERS]; - volatile struct dbdma_cmd *cap_cmd[MAX_GBUFFERS]; - volatile struct dbdma_cmd *last_cmd[MAX_GBUFFERS]; - volatile struct dbdma_cmd *pre_cmd[MAX_GBUFFERS]; - int need_pre_capture[MAX_GBUFFERS]; -#define PLANB_DUMMY 40 /* # of command buf's allocated for pre-capture seq. */ - int gwidth[MAX_GBUFFERS], gheight[MAX_GBUFFERS]; - unsigned int gfmt[MAX_GBUFFERS]; - int gnorm_switch[MAX_GBUFFERS]; - volatile unsigned int *frame_stat; -#define GBUFFER_UNUSED 0x00U -#define GBUFFER_GRABBING 0x01U -#define GBUFFER_DONE 0x02U -#ifdef PLANB_GSCANLINE - int gbytes_per_line; -#else -#define MAX_LNUM 431 /* change this if PLANB_MAXLINES or */ - /* PLANB_MAXPIXELS changes */ - int l_fr_addr_idx[MAX_GBUFFERS]; - unsigned char *l_to_addr[MAX_GBUFFERS][MAX_LNUM]; - int l_to_next_idx[MAX_GBUFFERS][MAX_LNUM]; - int l_to_next_size[MAX_GBUFFERS][MAX_LNUM]; - int lsize[MAX_GBUFFERS], lnum[MAX_GBUFFERS]; -#endif -}; - -#endif /* __KERNEL__ */ - -#endif /* _PLANB_H_ */ --- linux-2.6.20-rc2-mm1/drivers/media/video/planb.c 2006-12-28 11:57:33.000000000 +0100 +++ /dev/null 2006-09-19 00:45:31.000000000 +0200 @@ -1,2304 +0,0 @@ -/* - planb - PlanB frame grabber driver - - PlanB is used in the 7x00/8x00 series of PowerMacintosh - Computers as video input DMA controller. - - Copyright (C) 1998 Michel Lanners (mlan@cpu.lu) - - Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de) - - Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* $Id: planb.c,v 1.18 1999/05/02 17:36:34 mlan Exp $ */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "planb.h" -#include "saa7196.h" - -/* Would you mind for some ugly debugging? */ -#if 0 -#define DEBUG(x...) printk(KERN_DEBUG ## x) /* Debug driver */ -#else -#define DEBUG(x...) /* Don't debug driver */ -#endif - -#if 0 -#define IDEBUG(x...) printk(KERN_DEBUG ## x) /* Debug interrupt part */ -#else -#define IDEBUG(x...) /* Don't debug interrupt part */ -#endif - -/* Ever seen a Mac with more than 1 of these? */ -#define PLANB_MAX 1 - -static int planb_num; -static struct planb planbs[PLANB_MAX]; -static volatile struct planb_registers *planb_regs; - -static int def_norm = PLANB_DEF_NORM; /* default norm */ -static int video_nr = -1; - -module_param(def_norm, int, 0); -MODULE_PARM_DESC(def_norm, "Default startup norm (0=PAL, 1=NTSC, 2=SECAM)"); -module_param(video_nr, int, 0); -MODULE_LICENSE("GPL"); - - -/* ------------------ PlanB Exported Functions ------------------ */ -static long planb_write(struct video_device *, const char *, unsigned long, int); -static long planb_read(struct video_device *, char *, unsigned long, int); -static int planb_open(struct video_device *, int); -static void planb_close(struct video_device *); -static int planb_ioctl(struct video_device *, unsigned int, void *); -static int planb_init_done(struct video_device *); -static int planb_mmap(struct video_device *, const char *, unsigned long); -static void planb_irq(int, void *); -static void release_planb(void); -int init_planbs(struct video_init *); - -/* ------------------ PlanB Internal Functions ------------------ */ -static int planb_prepare_open(struct planb *); -static void planb_prepare_close(struct planb *); -static void saa_write_reg(unsigned char, unsigned char); -static unsigned char saa_status(int, struct planb *); -static void saa_set(unsigned char, unsigned char, struct planb *); -static void saa_init_regs(struct planb *); -static int grabbuf_alloc(struct planb *); -static int vgrab(struct planb *, struct video_mmap *); -static void add_clip(struct planb *, struct video_clip *); -static void fill_cmd_buff(struct planb *); -static void cmd_buff(struct planb *); -static volatile struct dbdma_cmd *setup_grab_cmd(int, struct planb *); -static void overlay_start(struct planb *); -static void overlay_stop(struct planb *); -static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *, unsigned short, - unsigned int); -static inline void tab_cmd_store(volatile struct dbdma_cmd *, unsigned int, - unsigned int); -static inline void tab_cmd_gen(volatile struct dbdma_cmd *, unsigned short, - unsigned short, unsigned int, unsigned int); -static int init_planb(struct planb *); -static int find_planb(void); -static void planb_pre_capture(int, int, struct planb *); -static volatile struct dbdma_cmd *cmd_geo_setup(volatile struct dbdma_cmd *, - int, int, int, int, int, struct planb *); -static inline void planb_dbdma_stop(volatile struct dbdma_regs *); -static unsigned int saa_geo_setup(int, int, int, int, struct planb *); -static inline int overlay_is_active(struct planb *); - -/*******************************/ -/* Memory management functions */ -/*******************************/ - -static int grabbuf_alloc(struct planb *pb) -{ - int i, npage; - - npage = MAX_GBUFFERS * ((PLANB_MAX_FBUF / PAGE_SIZE + 1) -#ifndef PLANB_GSCANLINE - + MAX_LNUM -#endif /* PLANB_GSCANLINE */ - ); - if ((pb->rawbuf = kmalloc(npage - * sizeof(unsigned long), GFP_KERNEL)) == 0) - return -ENOMEM; - for (i = 0; i < npage; i++) { - pb->rawbuf[i] = (unsigned char *)__get_free_pages(GFP_KERNEL - |GFP_DMA, 0); - if (!pb->rawbuf[i]) - break; - SetPageReserved(virt_to_page(pb->rawbuf[i])); - } - if (i-- < npage) { - printk(KERN_DEBUG "PlanB: init_grab: grab buffer not allocated\n"); - for (; i > 0; i--) { - ClearPageReserved(virt_to_page(pb->rawbuf[i])); - free_pages((unsigned long)pb->rawbuf[i], 0); - } - kfree(pb->rawbuf); - return -ENOBUFS; - } - pb->rawbuf_size = npage; - return 0; -} - -/*****************************/ -/* Hardware access functions */ -/*****************************/ - -static void saa_write_reg(unsigned char addr, unsigned char val) -{ - planb_regs->saa_addr = addr; eieio(); - planb_regs->saa_regval = val; eieio(); - return; -} - -/* return status byte 0 or 1: */ -static unsigned char saa_status(int byte, struct planb *pb) -{ - saa_regs[pb->win.norm][SAA7196_STDC] = - (saa_regs[pb->win.norm][SAA7196_STDC] & ~2) | ((byte & 1) << 1); - saa_write_reg (SAA7196_STDC, saa_regs[pb->win.norm][SAA7196_STDC]); - - /* Let's wait 30msec for this one */ - msleep_interruptible(30); - - return (unsigned char)in_8 (&planb_regs->saa_status); -} - -static void saa_set(unsigned char addr, unsigned char val, struct planb *pb) -{ - if(saa_regs[pb->win.norm][addr] != val) { - saa_regs[pb->win.norm][addr] = val; - saa_write_reg (addr, val); - } - return; -} - -static void saa_init_regs(struct planb *pb) -{ - int i; - - for (i = 0; i < SAA7196_NUMREGS; i++) - saa_write_reg (i, saa_regs[pb->win.norm][i]); -} - -static unsigned int saa_geo_setup(int width, int height, int interlace, int bpp, - struct planb *pb) -{ - int ht, norm = pb->win.norm; - - switch(bpp) { - case 2: - /* RGB555+a 1x16-bit + 16-bit transparent */ - saa_regs[norm][SAA7196_FMTS] &= ~0x3; - break; - case 1: - case 4: - /* RGB888 1x24-bit + 8-bit transparent */ - saa_regs[norm][SAA7196_FMTS] &= ~0x1; - saa_regs[norm][SAA7196_FMTS] |= 0x2; - break; - default: - return -EINVAL; - } - ht = (interlace ? height / 2 : height); - saa_regs[norm][SAA7196_OUTPIX] = (unsigned char) (width & 0x00ff); - saa_regs[norm][SAA7196_HFILT] = (saa_regs[norm][SAA7196_HFILT] & ~0x3) - | (width >> 8 & 0x3); - saa_regs[norm][SAA7196_OUTLINE] = (unsigned char) (ht & 0xff); - saa_regs[norm][SAA7196_VYP] = (saa_regs[norm][SAA7196_VYP] & ~0x3) - | (ht >> 8 & 0x3); - /* feed both fields if interlaced, or else feed only even fields */ - saa_regs[norm][SAA7196_FMTS] = (interlace) ? - (saa_regs[norm][SAA7196_FMTS] & ~0x60) - : (saa_regs[norm][SAA7196_FMTS] | 0x60); - /* transparent mode; extended format enabled */ - saa_regs[norm][SAA7196_DPATH] |= 0x3; - - return 0; -} - -/***************************/ -/* DBDMA support functions */ -/***************************/ - -static inline void planb_dbdma_restart(volatile struct dbdma_regs *ch) -{ - out_le32(&ch->control, PLANB_CLR(RUN)); - out_le32(&ch->control, PLANB_SET(RUN|WAKE) | PLANB_CLR(PAUSE)); -} - -static inline void planb_dbdma_stop(volatile struct dbdma_regs *ch) -{ - int i = 0; - - out_le32(&ch->control, PLANB_CLR(RUN) | PLANB_SET(FLUSH)); - while((in_le32(&ch->status) == (ACTIVE | FLUSH)) && (i < 999)) { - IDEBUG("PlanB: waiting for DMA to stop\n"); - i++; - } -} - -static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *ch, - unsigned short command, unsigned int cmd_dep) -{ - st_le16(&ch->command, command); - st_le32(&ch->cmd_dep, cmd_dep); -} - -static inline void tab_cmd_store(volatile struct dbdma_cmd *ch, - unsigned int phy_addr, unsigned int cmd_dep) -{ - st_le16(&ch->command, STORE_WORD | KEY_SYSTEM); - st_le16(&ch->req_count, 4); - st_le32(&ch->phy_addr, phy_addr); - st_le32(&ch->cmd_dep, cmd_dep); -} - -static inline void tab_cmd_gen(volatile struct dbdma_cmd *ch, - unsigned short command, unsigned short req_count, - unsigned int phy_addr, unsigned int cmd_dep) -{ - st_le16(&ch->command, command); - st_le16(&ch->req_count, req_count); - st_le32(&ch->phy_addr, phy_addr); - st_le32(&ch->cmd_dep, cmd_dep); -} - -static volatile struct dbdma_cmd *cmd_geo_setup( - volatile struct dbdma_cmd *c1, int width, int height, int interlace, - int bpp, int clip, struct planb *pb) -{ - int norm = pb->win.norm; - - if((saa_geo_setup(width, height, interlace, bpp, pb)) != 0) - return (volatile struct dbdma_cmd *)NULL; - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_FMTS); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_FMTS]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_DPATH); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_DPATH]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->even), - bpp | ((clip)? PLANB_CLIPMASK: 0)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->odd), - bpp | ((clip)? PLANB_CLIPMASK: 0)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_OUTPIX); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_OUTPIX]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_HFILT); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_HFILT]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_OUTLINE); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_OUTLINE]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_VYP); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_VYP]); - return c1; -} - -/******************************/ -/* misc. supporting functions */ -/******************************/ - -static inline void planb_lock(struct planb *pb) -{ - mutex_lock(&pb->lock); -} - -static inline void planb_unlock(struct planb *pb) -{ - mutex_unlock(&pb->lock); -} - -/***************/ -/* Driver Core */ -/***************/ - -static int planb_prepare_open(struct planb *pb) -{ - int i, size; - - /* allocate memory for two plus alpha command buffers (size: max lines, - plus 40 commands handling, plus 1 alignment), plus dummy command buf, - plus clipmask buffer, plus frame grabbing status */ - size = (pb->tab_size*(2+MAX_GBUFFERS*TAB_FACTOR)+1+MAX_GBUFFERS - * PLANB_DUMMY)*sizeof(struct dbdma_cmd) - +(PLANB_MAXLINES*((PLANB_MAXPIXELS+7)& ~7))/8 - +MAX_GBUFFERS*sizeof(unsigned int); - if ((pb->priv_space = kmalloc (size, GFP_KERNEL)) == 0) - return -ENOMEM; - memset ((void *) pb->priv_space, 0, size); - pb->overlay_last1 = pb->ch1_cmd = (volatile struct dbdma_cmd *) - DBDMA_ALIGN (pb->priv_space); - pb->overlay_last2 = pb->ch2_cmd = pb->ch1_cmd + pb->tab_size; - pb->ch1_cmd_phys = virt_to_bus(pb->ch1_cmd); - pb->cap_cmd[0] = pb->ch2_cmd + pb->tab_size; - pb->pre_cmd[0] = pb->cap_cmd[0] + pb->tab_size * TAB_FACTOR; - for (i = 1; i < MAX_GBUFFERS; i++) { - pb->cap_cmd[i] = pb->pre_cmd[i-1] + PLANB_DUMMY; - pb->pre_cmd[i] = pb->cap_cmd[i] + pb->tab_size * TAB_FACTOR; - } - pb->frame_stat=(volatile unsigned int *)(pb->pre_cmd[MAX_GBUFFERS-1] - + PLANB_DUMMY); - pb->mask = (unsigned char *)(pb->frame_stat+MAX_GBUFFERS); - - pb->rawbuf = NULL; - pb->rawbuf_size = 0; - pb->grabbing = 0; - for (i = 0; i < MAX_GBUFFERS; i++) { - pb->frame_stat[i] = GBUFFER_UNUSED; - pb->gwidth[i] = 0; - pb->gheight[i] = 0; - pb->gfmt[i] = 0; - pb->gnorm_switch[i] = 0; -#ifndef PLANB_GSCANLINE - pb->lsize[i] = 0; - pb->lnum[i] = 0; -#endif /* PLANB_GSCANLINE */ - } - pb->gcount = 0; - pb->suspend = 0; - pb->last_fr = -999; - pb->prev_last_fr = -999; - - /* Reset DMA controllers */ - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - - return 0; -} - -static void planb_prepare_close(struct planb *pb) -{ - int i; - - /* make sure the dma's are idle */ - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - /* free kernel memory of command buffers */ - if(pb->priv_space != 0) { - kfree (pb->priv_space); - pb->priv_space = 0; - pb->cmd_buff_inited = 0; - } - if(pb->rawbuf) { - for (i = 0; i < pb->rawbuf_size; i++) { - ClearPageReserved(virt_to_page(pb->rawbuf[i])); - free_pages((unsigned long)pb->rawbuf[i], 0); - } - kfree(pb->rawbuf); - } - pb->rawbuf = NULL; -} - -/*****************************/ -/* overlay support functions */ -/*****************************/ - -static inline int overlay_is_active(struct planb *pb) -{ - unsigned int size = pb->tab_size * sizeof(struct dbdma_cmd); - unsigned int caddr = (unsigned)in_le32(&pb->planb_base->ch1.cmdptr); - - return (in_le32(&pb->overlay_last1->cmd_dep) == pb->ch1_cmd_phys) - && (caddr < (pb->ch1_cmd_phys + size)) - && (caddr >= (unsigned)pb->ch1_cmd_phys); -} - -static void overlay_start(struct planb *pb) -{ - - DEBUG("PlanB: overlay_start()\n"); - - if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) { - - DEBUG("PlanB: presumably, grabbing is in progress...\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - out_le32 (&pb->planb_base->ch2.cmdptr, - virt_to_bus(pb->ch2_cmd)); - planb_dbdma_restart(&pb->planb_base->ch2); - st_le16 (&pb->ch1_cmd->command, DBDMA_NOP); - tab_cmd_dbdma(pb->last_cmd[pb->last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->ch1_cmd)); - eieio(); - pb->prev_last_fr = pb->last_fr; - pb->last_fr = -2; - if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) { - IDEBUG("PlanB: became inactive " - "in the mean time... reactivating\n"); - planb_dbdma_stop(&pb->planb_base->ch1); - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->ch1_cmd)); - planb_dbdma_restart(&pb->planb_base->ch1); - } - } else { - - DEBUG("PlanB: currently idle, so can do whatever\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - st_le32 (&pb->planb_base->ch2.cmdptr, - virt_to_bus(pb->ch2_cmd)); - st_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->ch1_cmd)); - out_le16 (&pb->ch1_cmd->command, DBDMA_NOP); - planb_dbdma_restart(&pb->planb_base->ch2); - planb_dbdma_restart(&pb->planb_base->ch1); - pb->last_fr = -1; - } - return; -} - -static void overlay_stop(struct planb *pb) -{ - DEBUG("PlanB: overlay_stop()\n"); - - if(pb->last_fr == -1) { - - DEBUG("PlanB: no grabbing, it seems...\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - pb->last_fr = -999; - } else if(pb->last_fr == -2) { - unsigned int cmd_dep; - tab_cmd_dbdma(pb->cap_cmd[pb->prev_last_fr], DBDMA_STOP, 0); - eieio(); - cmd_dep = (unsigned int)in_le32(&pb->overlay_last1->cmd_dep); - if(overlay_is_active(pb)) { - - DEBUG("PlanB: overlay is currently active\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - if(cmd_dep != pb->ch1_cmd_phys) { - out_le32(&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->overlay_last1)); - planb_dbdma_restart(&pb->planb_base->ch1); - } - } - pb->last_fr = pb->prev_last_fr; - pb->prev_last_fr = -999; - } - return; -} - -static void suspend_overlay(struct planb *pb) -{ - int fr = -1; - struct dbdma_cmd last; - - DEBUG("PlanB: suspend_overlay: %d\n", pb->suspend); - - if(pb->suspend++) - return; - if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) { - if(pb->last_fr == -2) { - fr = pb->prev_last_fr; - memcpy(&last, (void*)pb->last_cmd[fr], sizeof(last)); - tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0); - } - if(overlay_is_active(pb)) { - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - pb->suspended.overlay = 1; - pb->suspended.frame = fr; - memcpy(&pb->suspended.cmd, &last, sizeof(last)); - return; - } - } - pb->suspended.overlay = 0; - pb->suspended.frame = fr; - memcpy(&pb->suspended.cmd, &last, sizeof(last)); - return; -} - -static void resume_overlay(struct planb *pb) -{ - - DEBUG("PlanB: resume_overlay: %d\n", pb->suspend); - - if(pb->suspend > 1) - return; - if(pb->suspended.frame != -1) { - memcpy((void*)pb->last_cmd[pb->suspended.frame], - &pb->suspended.cmd, sizeof(pb->suspended.cmd)); - } - if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) { - goto finish; - } - if(pb->suspended.overlay) { - - DEBUG("PlanB: overlay being resumed\n"); - - st_le16 (&pb->ch1_cmd->command, DBDMA_NOP); - st_le16 (&pb->ch2_cmd->command, DBDMA_NOP); - /* Set command buffer addresses */ - st_le32(&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->overlay_last1)); - out_le32(&pb->planb_base->ch2.cmdptr, - virt_to_bus(pb->overlay_last2)); - /* Start the DMA controller */ - out_le32 (&pb->planb_base->ch2.control, - PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE)); - out_le32 (&pb->planb_base->ch1.control, - PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE)); - } else if(pb->suspended.frame != -1) { - out_le32(&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->last_cmd[pb->suspended.frame])); - out_le32 (&pb->planb_base->ch1.control, - PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE)); - } - -finish: - pb->suspend--; - wake_up_interruptible(&pb->suspendq); -} - -static void add_clip(struct planb *pb, struct video_clip *clip) -{ - volatile unsigned char *base; - int xc = clip->x, yc = clip->y; - int wc = clip->width, hc = clip->height; - int ww = pb->win.width, hw = pb->win.height; - int x, y, xtmp1, xtmp2; - - DEBUG("PlanB: clip %dx%d+%d+%d\n", wc, hc, xc, yc); - - if(xc < 0) { - wc += xc; - xc = 0; - } - if(yc < 0) { - hc += yc; - yc = 0; - } - if(xc + wc > ww) - wc = ww - xc; - if(wc <= 0) /* Nothing to do */ - return; - if(yc + hc > hw) - hc = hw - yc; - - for (y = yc; y < yc+hc; y++) { - xtmp1=xc>>3; - xtmp2=(xc+wc)>>3; - base = pb->mask + y*96; - if(xc != 0 || wc >= 8) - *(base + xtmp1) &= (unsigned char)(0x00ff & - (0xff00 >> (xc&7))); - for (x = xtmp1 + 1; x < xtmp2; x++) { - *(base + x) = 0; - } - if(xc < (ww & ~0x7)) - *(base + xtmp2) &= (unsigned char)(0x00ff >> - ((xc+wc) & 7)); - } - - return; -} - -static void fill_cmd_buff(struct planb *pb) -{ - int restore = 0; - volatile struct dbdma_cmd last; - - DEBUG("PlanB: fill_cmd_buff()\n"); - - if(pb->overlay_last1 != pb->ch1_cmd) { - restore = 1; - last = *(pb->overlay_last1); - } - memset ((void *) pb->ch1_cmd, 0, 2 * pb->tab_size - * sizeof(struct dbdma_cmd)); - cmd_buff (pb); - if(restore) - *(pb->overlay_last1) = last; - if(pb->suspended.overlay) { - unsigned long jump_addr = in_le32(&pb->overlay_last1->cmd_dep); - if(jump_addr != pb->ch1_cmd_phys) { - int i; - - DEBUG("PlanB: adjusting ch1's jump address\n"); - - for(i = 0; i < MAX_GBUFFERS; i++) { - if(pb->need_pre_capture[i]) { - if(jump_addr == virt_to_bus(pb->pre_cmd[i])) - goto found; - } else { - if(jump_addr == virt_to_bus(pb->cap_cmd[i])) - goto found; - } - } - - DEBUG("PlanB: not found...\n"); - - goto out; -found: - if(pb->need_pre_capture[i]) - out_le32(&pb->pre_cmd[i]->phy_addr, - virt_to_bus(pb->overlay_last1)); - else - out_le32(&pb->cap_cmd[i]->phy_addr, - virt_to_bus(pb->overlay_last1)); - } - } -out: - pb->cmd_buff_inited = 1; - - return; -} - -static void cmd_buff(struct planb *pb) -{ - int i, bpp, count, nlines, stepsize, interlace; - unsigned long base, jump, addr_com, addr_dep; - volatile struct dbdma_cmd *c1 = pb->ch1_cmd; - volatile struct dbdma_cmd *c2 = pb->ch2_cmd; - - interlace = pb->win.interlace; - bpp = pb->win.bpp; - count = (bpp * ((pb->win.x + pb->win.width > pb->win.swidth) ? - (pb->win.swidth - pb->win.x) : pb->win.width)); - nlines = ((pb->win.y + pb->win.height > pb->win.sheight) ? - (pb->win.sheight - pb->win.y) : pb->win.height); - - /* Do video in: */ - - /* Preamble commands: */ - addr_com = virt_to_bus(c1); - addr_dep = virt_to_bus(&c1->cmd_dep); - tab_cmd_dbdma(c1++, DBDMA_NOP, 0); - jump = virt_to_bus(c1+16); /* 14 by cmd_geo_setup() and 2 for padding */ - if((c1 = cmd_geo_setup(c1, pb->win.width, pb->win.height, interlace, - bpp, 1, pb)) == NULL) { - printk(KERN_WARNING "PlanB: encountered serious problems\n"); - tab_cmd_dbdma(pb->ch1_cmd + 1, DBDMA_STOP, 0); - tab_cmd_dbdma(pb->ch2_cmd + 1, DBDMA_STOP, 0); - return; - } - tab_cmd_store(c1++, addr_com, (unsigned)(DBDMA_NOP | BR_ALWAYS) << 16); - tab_cmd_store(c1++, addr_dep, jump); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel), - PLANB_SET(FIELD_SYNC)); - /* (1) wait for field sync to be set */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - /* wait for field sync to be cleared */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - /* if not odd field, wait until field sync is set again */ - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++; - /* assert ch_sync to ch2 */ - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control), - PLANB_SET(CH_SYNC)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - base = (pb->frame_buffer_phys + pb->offset + pb->win.y * (pb->win.bpl - + pb->win.pad) + pb->win.x * bpp); - - if (interlace) { - stepsize = 2; - jump = virt_to_bus(c1 + (nlines + 1) / 2); - } else { - stepsize = 1; - jump = virt_to_bus(c1 + nlines); - } - - /* even field data: */ - for (i=0; i < nlines; i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, - count, base + i * (pb->win.bpl + pb->win.pad), jump); - - /* For non-interlaced, we use even fields only */ - if (!interlace) - goto cmd_tab_data_end; - - /* Resync to odd field */ - /* (2) wait for field sync to be set */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - /* wait for field sync to be cleared */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - /* if not odd field, wait until field sync is set again */ - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++; - /* assert ch_sync to ch2 */ - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control), - PLANB_SET(CH_SYNC)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - /* odd field data: */ - jump = virt_to_bus(c1 + nlines / 2); - for (i=1; i < nlines; i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count, - base + i * (pb->win.bpl + pb->win.pad), jump); - - /* And jump back to the start */ -cmd_tab_data_end: - pb->overlay_last1 = c1; /* keep a pointer to the last command */ - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch1_cmd)); - - /* Clipmask command buffer */ - - /* Preamble commands: */ - tab_cmd_dbdma(c2++, DBDMA_NOP, 0); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel), - PLANB_SET(CH_SYNC)); - /* wait until ch1 asserts ch_sync */ - tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0); - /* clear ch_sync asserted by ch1 */ - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.control), - PLANB_CLR(CH_SYNC)); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel), - PLANB_SET(FIELD_SYNC)); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel), - PLANB_SET(ODD_FIELD)); - - /* jump to end of even field if appropriate */ - /* this points to (interlace)? pos. C: pos. B */ - jump = (interlace) ? virt_to_bus(c2 + (nlines + 1) / 2 + 2): - virt_to_bus(c2 + nlines + 2); - /* if odd field, skip over to odd field clipmasking */ - tab_cmd_dbdma(c2++, DBDMA_NOP | BR_IFSET, jump); - - /* even field mask: */ - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel), - PLANB_SET(DMA_ABORT)); - /* this points to pos. B */ - jump = (interlace) ? virt_to_bus(c2 + nlines + 1): - virt_to_bus(c2 + nlines); - base = virt_to_bus(pb->mask); - for (i=0; i < nlines; i += stepsize, c2++) - tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96, - base + i * 96, jump); - - /* For non-interlaced, we use only even fields */ - if(!interlace) - goto cmd_tab_mask_end; - - /* odd field mask: */ -/* C */ tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel), - PLANB_SET(DMA_ABORT)); - /* this points to pos. B */ - jump = virt_to_bus(c2 + nlines / 2); - base = virt_to_bus(pb->mask); - for (i=1; i < nlines; i += 2, c2++) /* abort if set */ - tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96, - base + i * 96, jump); - - /* Inform channel 1 and jump back to start */ -cmd_tab_mask_end: - /* ok, I just realized this is kind of flawed. */ - /* this part is reached only after odd field clipmasking. */ - /* wanna clean up? */ - /* wait for field sync to be set */ - /* corresponds to fsync (1) of ch1 */ -/* B */ tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0); - /* restart ch1, meant to clear any dead bit or something */ - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control), - PLANB_CLR(RUN)); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control), - PLANB_SET(RUN)); - pb->overlay_last2 = c2; /* keep a pointer to the last command */ - /* start over even field clipmasking */ - tab_cmd_dbdma(c2, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch2_cmd)); - - eieio(); - return; -} - -/*********************************/ -/* grabdisplay support functions */ -/*********************************/ - -static int palette2fmt[] = { - 0, - PLANB_GRAY, - 0, - 0, - 0, - PLANB_COLOUR32, - PLANB_COLOUR15, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, -}; - -#define PLANB_PALETTE_MAX 15 - -static int vgrab(struct planb *pb, struct video_mmap *mp) -{ - unsigned int fr = mp->frame; - unsigned int format; - - if(pb->rawbuf==NULL) { - int err; - if((err=grabbuf_alloc(pb))) - return err; - } - - IDEBUG("PlanB: grab %d: %dx%d(%u)\n", pb->grabbing, - mp->width, mp->height, fr); - - if(pb->grabbing >= MAX_GBUFFERS) - return -ENOBUFS; - if(fr > (MAX_GBUFFERS - 1) || fr < 0) - return -EINVAL; - if(mp->height <= 0 || mp->width <= 0) - return -EINVAL; - if(mp->format < 0 || mp->format >= PLANB_PALETTE_MAX) - return -EINVAL; - if((format = palette2fmt[mp->format]) == 0) - return -EINVAL; - if (mp->height * mp->width * format > PLANB_MAX_FBUF) /* format = bpp */ - return -EINVAL; - - planb_lock(pb); - if(mp->width != pb->gwidth[fr] || mp->height != pb->gheight[fr] || - format != pb->gfmt[fr] || (pb->gnorm_switch[fr])) { - int i; -#ifndef PLANB_GSCANLINE - unsigned int osize = pb->gwidth[fr] * pb->gheight[fr] - * pb->gfmt[fr]; - unsigned int nsize = mp->width * mp->height * format; -#endif - - IDEBUG("PlanB: gwidth = %d, gheight = %d, mp->format = %u\n", - mp->width, mp->height, mp->format); - -#ifndef PLANB_GSCANLINE - if(pb->gnorm_switch[fr]) - nsize = 0; - if (nsize < osize) { - for(i = pb->gbuf_idx[fr]; osize > 0; i++) { - memset((void *)pb->rawbuf[i], 0, PAGE_SIZE); - osize -= PAGE_SIZE; - } - } - for(i = pb->l_fr_addr_idx[fr]; i < pb->l_fr_addr_idx[fr] - + pb->lnum[fr]; i++) - memset((void *)pb->rawbuf[i], 0, PAGE_SIZE); -#else -/* XXX TODO */ -/* - if(pb->gnorm_switch[fr]) - memset((void *)pb->gbuffer[fr], 0, - pb->gbytes_per_line * pb->gheight[fr]); - else { - if(mp-> - for(i = 0; i < pb->gheight[fr]; i++) { - memset((void *)(pb->gbuffer[fr] - + pb->gbytes_per_line * i - } - } -*/ -#endif - pb->gwidth[fr] = mp->width; - pb->gheight[fr] = mp->height; - pb->gfmt[fr] = format; - pb->last_cmd[fr] = setup_grab_cmd(fr, pb); - planb_pre_capture(fr, pb->gfmt[fr], pb); /* gfmt = bpp */ - pb->need_pre_capture[fr] = 1; - pb->gnorm_switch[fr] = 0; - } else - pb->need_pre_capture[fr] = 0; - pb->frame_stat[fr] = GBUFFER_GRABBING; - if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) { - - IDEBUG("PlanB: ch1 inactive, initiating grabbing\n"); - - planb_dbdma_stop(&pb->planb_base->ch1); - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->pre_cmd[fr])); - } else { - tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0); - tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0); - /* let's be on the safe side. here is not timing critical. */ - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), DBDMA_NOP, 0); - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->cap_cmd[fr])); - } - planb_dbdma_restart(&pb->planb_base->ch1); - pb->last_fr = fr; - } else { - int i; - - IDEBUG("PlanB: ch1 active, grabbing being queued\n"); - - if((pb->last_fr == -1) || ((pb->last_fr == -2) && - overlay_is_active(pb))) { - - IDEBUG("PlanB: overlay is active, grabbing defered\n"); - - tab_cmd_dbdma(pb->last_cmd[fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->ch1_cmd)); - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - tab_cmd_store(pb->pre_cmd[fr], - virt_to_bus(&pb->overlay_last1->cmd_dep), - virt_to_bus(pb->ch1_cmd)); - eieio(); - out_le32 (&pb->overlay_last1->cmd_dep, - virt_to_bus(pb->pre_cmd[fr])); - } else { - tab_cmd_store(pb->cap_cmd[fr], - virt_to_bus(&pb->overlay_last1->cmd_dep), - virt_to_bus(pb->ch1_cmd)); - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP, 0); - eieio(); - out_le32 (&pb->overlay_last1->cmd_dep, - virt_to_bus(pb->cap_cmd[fr])); - } - for(i = 0; overlay_is_active(pb) && i < 999; i++) - IDEBUG("PlanB: waiting for overlay done\n"); - tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0); - pb->prev_last_fr = fr; - pb->last_fr = -2; - } else if(pb->last_fr == -2) { - - IDEBUG("PlanB: mixed mode detected, grabbing" - " will be done before activating overlay\n"); - - tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0); - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->pre_cmd[fr])); - eieio(); - } else { - tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0); - if(pb->gwidth[pb->prev_last_fr] != - pb->gwidth[fr] - || pb->gheight[pb->prev_last_fr] != - pb->gheight[fr] - || pb->gfmt[pb->prev_last_fr] != - pb->gfmt[fr]) - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP, 0); - else - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr] + 16)); - tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr])); - eieio(); - } - tab_cmd_dbdma(pb->last_cmd[fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->ch1_cmd)); - eieio(); - pb->prev_last_fr = fr; - pb->last_fr = -2; - } else { - - IDEBUG("PlanB: active grabbing session detected\n"); - - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - tab_cmd_dbdma(pb->last_cmd[pb->last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->pre_cmd[fr])); - eieio(); - } else { - tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0); - tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0); - if(pb->gwidth[pb->last_fr] != pb->gwidth[fr] - || pb->gheight[pb->last_fr] != - pb->gheight[fr] - || pb->gfmt[pb->last_fr] != - pb->gfmt[fr]) - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP, 0); - else - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr] + 16)); - tab_cmd_dbdma(pb->last_cmd[pb->last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr])); - eieio(); - } - pb->last_fr = fr; - } - if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) { - - IDEBUG("PlanB: became inactive in the mean time..." - "reactivating\n"); - - planb_dbdma_stop(&pb->planb_base->ch1); - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->cap_cmd[fr])); - planb_dbdma_restart(&pb->planb_base->ch1); - } - } - pb->grabbing++; - planb_unlock(pb); - - return 0; -} - -static void planb_pre_capture(int fr, int bpp, struct planb *pb) -{ - volatile struct dbdma_cmd *c1 = pb->pre_cmd[fr]; - int interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0; - - tab_cmd_dbdma(c1++, DBDMA_NOP, 0); - if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace, - bpp, 0, pb)) == NULL) { - printk(KERN_WARNING "PlanB: encountered some problems\n"); - tab_cmd_dbdma(pb->pre_cmd[fr] + 1, DBDMA_STOP, 0); - return; - } - /* Sync to even field */ - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel), - PLANB_SET(FIELD_SYNC)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++; - tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - /* For non-interlaced, we use even fields only */ - if (pb->gheight[fr] <= pb->maxlines/2) - goto cmd_tab_data_end; - /* Sync to odd field */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++; - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); -cmd_tab_data_end: - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->cap_cmd[fr])); - - eieio(); -} - -static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb) -{ - int i, bpp, count, nlines, stepsize, interlace; -#ifdef PLANB_GSCANLINE - int scanline; -#else - int nlpp, leftover1; - unsigned long base; -#endif - unsigned long jump; - int pagei; - volatile struct dbdma_cmd *c1; - volatile struct dbdma_cmd *jump_addr; - - c1 = pb->cap_cmd[fr]; - interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0; - bpp = pb->gfmt[fr]; /* gfmt = bpp */ - count = bpp * pb->gwidth[fr]; - nlines = pb->gheight[fr]; -#ifdef PLANB_GSCANLINE - scanline = pb->gbytes_per_line; -#else - pb->lsize[fr] = count; - pb->lnum[fr] = 0; -#endif - - /* Do video in: */ - - /* Preamble commands: */ - tab_cmd_dbdma(c1++, DBDMA_NOP, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(c1 + 16)); c1++; - if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace, - bpp, 0, pb)) == NULL) { - printk(KERN_WARNING "PlanB: encountered serious problems\n"); - tab_cmd_dbdma(pb->cap_cmd[fr] + 1, DBDMA_STOP, 0); - return (pb->cap_cmd[fr] + 2); - } - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel), - PLANB_SET(FIELD_SYNC)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++; - tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - if (interlace) { - stepsize = 2; - jump_addr = c1 + TAB_FACTOR * (nlines + 1) / 2; - } else { - stepsize = 1; - jump_addr = c1 + TAB_FACTOR * nlines; - } - jump = virt_to_bus(jump_addr); - - /* even field data: */ - - pagei = pb->gbuf_idx[fr]; -#ifdef PLANB_GSCANLINE - for (i = 0; i < nlines; i += stepsize) { - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pagei - + i * scanline / PAGE_SIZE]), jump); - } -#else - i = 0; - leftover1 = 0; - do { - int j; - - base = virt_to_bus(pb->rawbuf[pagei]); - nlpp = (PAGE_SIZE - leftover1) / count / stepsize; - for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, - count, base + count * j * stepsize + leftover1, jump); - if(i < nlines) { - int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1; - - if(lov0 == 0) - leftover1 = 0; - else { - if(lov0 >= count) { - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, base - + count * nlpp * stepsize + leftover1, jump); - } else { - pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei] - + count * nlpp * stepsize + leftover1; - pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1; - pb->l_to_next_size[fr][pb->lnum[fr]] = count - lov0; - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr] - + pb->lnum[fr]]), jump); - if(++pb->lnum[fr] > MAX_LNUM) - pb->lnum[fr]--; - } - leftover1 = count * stepsize - lov0; - i += stepsize; - } - } - pagei++; - } while(i < nlines); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump); - c1 = jump_addr; -#endif /* PLANB_GSCANLINE */ - - /* For non-interlaced, we use even fields only */ - if (!interlace) - goto cmd_tab_data_end; - - /* Sync to odd field */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++; - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - /* odd field data: */ - jump_addr = c1 + TAB_FACTOR * nlines / 2; - jump = virt_to_bus(jump_addr); -#ifdef PLANB_GSCANLINE - for (i = 1; i < nlines; i += stepsize) { - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pagei - + i * scanline / PAGE_SIZE]), jump); - } -#else - i = 1; - leftover1 = 0; - pagei = pb->gbuf_idx[fr]; - if(nlines <= 1) - goto skip; - do { - int j; - - base = virt_to_bus(pb->rawbuf[pagei]); - nlpp = (PAGE_SIZE - leftover1) / count / stepsize; - if(leftover1 >= count) { - tab_cmd_gen(c1++, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count, - base + leftover1 - count, jump); - i += stepsize; - } - for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count, - base + count * (j * stepsize + 1) + leftover1, jump); - if(i < nlines) { - int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1; - - if(lov0 == 0) - leftover1 = 0; - else { - if(lov0 > count) { - pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei] - + count * (nlpp * stepsize + 1) + leftover1; - pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1; - pb->l_to_next_size[fr][pb->lnum[fr]] = count * stepsize - - lov0; - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr] - + pb->lnum[fr]]), jump); - if(++pb->lnum[fr] > MAX_LNUM) - pb->lnum[fr]--; - i += stepsize; - } - leftover1 = count * stepsize - lov0; - } - } - pagei++; - } while(i < nlines); -skip: - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump); - c1 = jump_addr; -#endif /* PLANB_GSCANLINE */ - -cmd_tab_data_end: - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->intr_stat), - (fr << 9) | PLANB_FRM_IRQ | PLANB_GEN_IRQ); - /* stop it */ - tab_cmd_dbdma(c1, DBDMA_STOP, 0); - - eieio(); - return c1; -} - -static void planb_irq(int irq, void *dev_id) -{ - unsigned int stat, astat; - struct planb *pb = (struct planb *)dev_id; - - IDEBUG("PlanB: planb_irq()\n"); - - /* get/clear interrupt status bits */ - eieio(); - stat = in_le32(&pb->planb_base->intr_stat); - astat = stat & pb->intr_mask; - out_le32(&pb->planb_base->intr_stat, PLANB_FRM_IRQ - & ~astat & stat & ~PLANB_GEN_IRQ); - IDEBUG("PlanB: stat = %X, astat = %X\n", stat, astat); - - if(astat & PLANB_FRM_IRQ) { - unsigned int fr = stat >> 9; -#ifndef PLANB_GSCANLINE - int i; -#endif - IDEBUG("PlanB: PLANB_FRM_IRQ\n"); - - pb->gcount++; - - IDEBUG("PlanB: grab %d: fr = %d, gcount = %d\n", - pb->grabbing, fr, pb->gcount); -#ifndef PLANB_GSCANLINE - IDEBUG("PlanB: %d * %d bytes are being copied over\n", - pb->lnum[fr], pb->lsize[fr]); - for(i = 0; i < pb->lnum[fr]; i++) { - int first = pb->lsize[fr] - pb->l_to_next_size[fr][i]; - - memcpy(pb->l_to_addr[fr][i], - pb->rawbuf[pb->l_fr_addr_idx[fr] + i], - first); - memcpy(pb->rawbuf[pb->l_to_next_idx[fr][i]], - pb->rawbuf[pb->l_fr_addr_idx[fr] + i] + first, - pb->l_to_next_size[fr][i]); - } -#endif - pb->frame_stat[fr] = GBUFFER_DONE; - pb->grabbing--; - wake_up_interruptible(&pb->capq); - return; - } - /* incorrect interrupts? */ - pb->intr_mask = PLANB_CLR_IRQ; - out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ); - printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts" - " unconditionally\n"); -} - -/******************************* - * Device Operations functions * - *******************************/ - -static int planb_open(struct video_device *dev, int mode) -{ - struct planb *pb = (struct planb *)dev; - - if (pb->user == 0) { - int err; - if((err = planb_prepare_open(pb)) != 0) - return err; - } - pb->user++; - - DEBUG("PlanB: device opened\n"); - return 0; -} - -static void planb_close(struct video_device *dev) -{ - struct planb *pb = (struct planb *)dev; - - if(pb->user < 1) /* ??? */ - return; - planb_lock(pb); - if (pb->user == 1) { - if (pb->overlay) { - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - pb->overlay = 0; - } - planb_prepare_close(pb); - } - pb->user--; - planb_unlock(pb); - - DEBUG("PlanB: device closed\n"); -} - -static long planb_read(struct video_device *v, char *buf, unsigned long count, - int nonblock) -{ - DEBUG("planb: read request\n"); - return -EINVAL; -} - -static long planb_write(struct video_device *v, const char *buf, - unsigned long count, int nonblock) -{ - DEBUG("planb: write request\n"); - return -EINVAL; -} - -static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) -{ - struct planb *pb=(struct planb *)dev; - - switch (cmd) - { - case VIDIOCGCAP: - { - struct video_capability b; - - DEBUG("PlanB: IOCTL VIDIOCGCAP\n"); - - strcpy (b.name, pb->video_dev.name); - b.type = VID_TYPE_OVERLAY | VID_TYPE_CLIPPING | - VID_TYPE_FRAMERAM | VID_TYPE_SCALES | - VID_TYPE_CAPTURE; - b.channels = 2; /* composite & svhs */ - b.audios = 0; - b.maxwidth = PLANB_MAXPIXELS; - b.maxheight = PLANB_MAXLINES; - b.minwidth = 32; /* wild guess */ - b.minheight = 32; - if (copy_to_user(arg,&b,sizeof(b))) - return -EFAULT; - return 0; - } - case VIDIOCSFBUF: - { - struct video_buffer v; - unsigned short bpp; - unsigned int fmt; - - DEBUG("PlanB: IOCTL VIDIOCSFBUF\n"); - - if (!capable(CAP_SYS_ADMIN) - || !capable(CAP_SYS_RAWIO)) - return -EPERM; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - planb_lock(pb); - switch(v.depth) { - case 8: - bpp = 1; - fmt = PLANB_GRAY; - break; - case 15: - case 16: - bpp = 2; - fmt = PLANB_COLOUR15; - break; - case 24: - case 32: - bpp = 4; - fmt = PLANB_COLOUR32; - break; - default: - planb_unlock(pb); - return -EINVAL; - } - if (bpp * v.width > v.bytesperline) { - planb_unlock(pb); - return -EINVAL; - } - pb->win.bpp = bpp; - pb->win.color_fmt = fmt; - pb->frame_buffer_phys = (unsigned long) v.base; - pb->win.sheight = v.height; - pb->win.swidth = v.width; - pb->picture.depth = pb->win.depth = v.depth; - pb->win.bpl = pb->win.bpp * pb->win.swidth; - pb->win.pad = v.bytesperline - pb->win.bpl; - - DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d," - " bpl %d (+ %d)\n", v.base, v.width,v.height, - pb->win.bpp, pb->win.bpl, pb->win.pad); - - pb->cmd_buff_inited = 0; - if(pb->overlay) { - suspend_overlay(pb); - fill_cmd_buff(pb); - resume_overlay(pb); - } - planb_unlock(pb); - return 0; - } - case VIDIOCGFBUF: - { - struct video_buffer v; - - DEBUG("PlanB: IOCTL VIDIOCGFBUF\n"); - - v.base = (void *)pb->frame_buffer_phys; - v.height = pb->win.sheight; - v.width = pb->win.swidth; - v.depth = pb->win.depth; - v.bytesperline = pb->win.bpl + pb->win.pad; - if (copy_to_user(arg, &v, sizeof(v))) - return -EFAULT; - return 0; - } - case VIDIOCCAPTURE: - { - int i; - - if(copy_from_user(&i, arg, sizeof(i))) - return -EFAULT; - if(i==0) { - DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n"); - - if (!(pb->overlay)) - return 0; - planb_lock(pb); - pb->overlay = 0; - overlay_stop(pb); - planb_unlock(pb); - } else { - DEBUG("PlanB: IOCTL VIDIOCCAPTURE Start\n"); - - if (pb->frame_buffer_phys == 0 || - pb->win.width == 0 || - pb->win.height == 0) - return -EINVAL; - if (pb->overlay) - return 0; - planb_lock(pb); - pb->overlay = 1; - if(!(pb->cmd_buff_inited)) - fill_cmd_buff(pb); - overlay_start(pb); - planb_unlock(pb); - } - return 0; - } - case VIDIOCGCHAN: - { - struct video_channel v; - - DEBUG("PlanB: IOCTL VIDIOCGCHAN\n"); - - if(copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - v.flags = 0; - v.tuners = 0; - v.type = VIDEO_TYPE_CAMERA; - v.norm = pb->win.norm; - switch(v.channel) - { - case 0: - strcpy(v.name,"Composite"); - break; - case 1: - strcpy(v.name,"SVHS"); - break; - default: - return -EINVAL; - break; - } - if(copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - - return 0; - } - case VIDIOCSCHAN: - { - struct video_channel v; - - DEBUG("PlanB: IOCTL VIDIOCSCHAN\n"); - - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - - if (v.norm != pb->win.norm) { - int i, maxlines; - - switch (v.norm) - { - case VIDEO_MODE_PAL: - case VIDEO_MODE_SECAM: - maxlines = PLANB_MAXLINES; - break; - case VIDEO_MODE_NTSC: - maxlines = PLANB_NTSC_MAXLINES; - break; - default: - return -EINVAL; - break; - } - planb_lock(pb); - /* empty the grabbing queue */ - wait_event(pb->capq, !pb->grabbing); - pb->maxlines = maxlines; - pb->win.norm = v.norm; - /* Stop overlay if running */ - suspend_overlay(pb); - for(i = 0; i < MAX_GBUFFERS; i++) - pb->gnorm_switch[i] = 1; - /* I know it's an overkill, but.... */ - fill_cmd_buff(pb); - /* ok, now init it accordingly */ - saa_init_regs (pb); - /* restart overlay if it was running */ - resume_overlay(pb); - planb_unlock(pb); - } - - switch(v.channel) - { - case 0: /* Composite */ - saa_set (SAA7196_IOCC, - ((saa_regs[pb->win.norm][SAA7196_IOCC] & - ~7) | 3), pb); - break; - case 1: /* SVHS */ - saa_set (SAA7196_IOCC, - ((saa_regs[pb->win.norm][SAA7196_IOCC] & - ~7) | 4), pb); - break; - default: - return -EINVAL; - break; - } - - return 0; - } - case VIDIOCGPICT: - { - struct video_picture vp = pb->picture; - - DEBUG("PlanB: IOCTL VIDIOCGPICT\n"); - - switch(pb->win.color_fmt) { - case PLANB_GRAY: - vp.palette = VIDEO_PALETTE_GREY; - case PLANB_COLOUR15: - vp.palette = VIDEO_PALETTE_RGB555; - break; - case PLANB_COLOUR32: - vp.palette = VIDEO_PALETTE_RGB32; - break; - default: - vp.palette = 0; - break; - } - - if(copy_to_user(arg,&vp,sizeof(vp))) - return -EFAULT; - return 0; - } - case VIDIOCSPICT: - { - struct video_picture vp; - - DEBUG("PlanB: IOCTL VIDIOCSPICT\n"); - - if(copy_from_user(&vp,arg,sizeof(vp))) - return -EFAULT; - pb->picture = vp; - /* Should we do sanity checks here? */ - saa_set (SAA7196_BRIG, (unsigned char) - ((pb->picture.brightness) >> 8), pb); - saa_set (SAA7196_HUEC, (unsigned char) - ((pb->picture.hue) >> 8) ^ 0x80, pb); - saa_set (SAA7196_CSAT, (unsigned char) - ((pb->picture.colour) >> 9), pb); - saa_set (SAA7196_CONT, (unsigned char) - ((pb->picture.contrast) >> 9), pb); - - return 0; - } - case VIDIOCSWIN: - { - struct video_window vw; - struct video_clip clip; - int i; - - DEBUG("PlanB: IOCTL VIDIOCSWIN\n"); - - if(copy_from_user(&vw,arg,sizeof(vw))) - return -EFAULT; - - planb_lock(pb); - /* Stop overlay if running */ - suspend_overlay(pb); - pb->win.interlace = (vw.height > pb->maxlines/2)? 1: 0; - if (pb->win.x != vw.x || - pb->win.y != vw.y || - pb->win.width != vw.width || - pb->win.height != vw.height || - !pb->cmd_buff_inited) { - pb->win.x = vw.x; - pb->win.y = vw.y; - pb->win.width = vw.width; - pb->win.height = vw.height; - fill_cmd_buff(pb); - } - /* Reset clip mask */ - memset ((void *) pb->mask, 0xff, (pb->maxlines - * ((PLANB_MAXPIXELS + 7) & ~7)) / 8); - /* Add any clip rects */ - for (i = 0; i < vw.clipcount; i++) { - if (copy_from_user(&clip, vw.clips + i, - sizeof(struct video_clip))) - return -EFAULT; - add_clip(pb, &clip); - } - /* restart overlay if it was running */ - resume_overlay(pb); - planb_unlock(pb); - return 0; - } - case VIDIOCGWIN: - { - struct video_window vw; - - DEBUG("PlanB: IOCTL VIDIOCGWIN\n"); - - vw.x=pb->win.x; - vw.y=pb->win.y; - vw.width=pb->win.width; - vw.height=pb->win.height; - vw.chromakey=0; - vw.flags=0; - if(pb->win.interlace) - vw.flags|=VIDEO_WINDOW_INTERLACE; - if(copy_to_user(arg,&vw,sizeof(vw))) - return -EFAULT; - return 0; - } - case VIDIOCSYNC: { - int i; - - IDEBUG("PlanB: IOCTL VIDIOCSYNC\n"); - - if(copy_from_user((void *)&i,arg,sizeof(int))) - return -EFAULT; - - IDEBUG("PlanB: sync to frame %d\n", i); - - if(i > (MAX_GBUFFERS - 1) || i < 0) - return -EINVAL; -chk_grab: - switch (pb->frame_stat[i]) { - case GBUFFER_UNUSED: - return -EINVAL; - case GBUFFER_GRABBING: - IDEBUG("PlanB: waiting for grab" - " done (%d)\n", i); - interruptible_sleep_on(&pb->capq); - if(signal_pending(current)) - return -EINTR; - goto chk_grab; - case GBUFFER_DONE: - pb->frame_stat[i] = GBUFFER_UNUSED; - break; - } - return 0; - } - - case VIDIOCMCAPTURE: - { - struct video_mmap vm; - volatile unsigned int status; - - IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n"); - - if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm))) - return -EFAULT; - status = pb->frame_stat[vm.frame]; - if (status != GBUFFER_UNUSED) - return -EBUSY; - - return vgrab(pb, &vm); - } - - case VIDIOCGMBUF: - { - int i; - struct video_mbuf vm; - - DEBUG("PlanB: IOCTL VIDIOCGMBUF\n"); - - memset(&vm, 0 , sizeof(vm)); - vm.size = PLANB_MAX_FBUF * MAX_GBUFFERS; - vm.frames = MAX_GBUFFERS; - for(i = 0; i= SAA7196_NUMREGS) - return -EINVAL; - preg.val = saa_regs[pb->win.norm][preg.addr]; - if(copy_to_user((void *)arg, (void *)&preg, - sizeof(preg))) - return -EFAULT; - return 0; - } - - case PLANBIOCSSAAREGS: - { - struct planb_saa_regs preg; - - DEBUG("PlanB: IOCTL PLANBIOCSSAAREGS\n"); - - if(copy_from_user(&preg, arg, sizeof(preg))) - return -EFAULT; - if(preg.addr >= SAA7196_NUMREGS) - return -EINVAL; - saa_set (preg.addr, preg.val, pb); - return 0; - } - - case PLANBIOCGSTAT: - { - struct planb_stat_regs pstat; - - DEBUG("PlanB: IOCTL PLANBIOCGSTAT\n"); - - pstat.ch1_stat = in_le32(&pb->planb_base->ch1.status); - pstat.ch2_stat = in_le32(&pb->planb_base->ch2.status); - pstat.saa_stat0 = saa_status(0, pb); - pstat.saa_stat1 = saa_status(1, pb); - - if(copy_to_user((void *)arg, (void *)&pstat, - sizeof(pstat))) - return -EFAULT; - return 0; - } - - case PLANBIOCSMODE: { - int v; - - DEBUG("PlanB: IOCTL PLANBIOCSMODE\n"); - - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - - switch(v) - { - case PLANB_TV_MODE: - saa_set (SAA7196_STDC, - (saa_regs[pb->win.norm][SAA7196_STDC] & - 0x7f), pb); - break; - case PLANB_VTR_MODE: - saa_set (SAA7196_STDC, - (saa_regs[pb->win.norm][SAA7196_STDC] | - 0x80), pb); - break; - default: - return -EINVAL; - break; - } - pb->win.mode = v; - return 0; - } - case PLANBIOCGMODE: { - int v=pb->win.mode; - - DEBUG("PlanB: IOCTL PLANBIOCGMODE\n"); - - if(copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - return 0; - } -#ifdef PLANB_GSCANLINE - case PLANBG_GRAB_BPL: { - int v=pb->gbytes_per_line; - - DEBUG("PlanB: IOCTL PLANBG_GRAB_BPL\n"); - - if(copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - return 0; - } -#endif /* PLANB_GSCANLINE */ - case PLANB_INTR_DEBUG: { - int i; - - DEBUG("PlanB: IOCTL PLANB_INTR_DEBUG\n"); - - if(copy_from_user(&i, arg, sizeof(i))) - return -EFAULT; - - /* avoid hang ups all together */ - for (i = 0; i < MAX_GBUFFERS; i++) { - if(pb->frame_stat[i] == GBUFFER_GRABBING) { - pb->frame_stat[i] = GBUFFER_DONE; - } - } - if(pb->grabbing) - pb->grabbing--; - wake_up_interruptible(&pb->capq); - return 0; - } - case PLANB_INV_REGS: { - int i; - struct planb_any_regs any; - - DEBUG("PlanB: IOCTL PLANB_INV_REGS\n"); - - if(copy_from_user(&any, arg, sizeof(any))) - return -EFAULT; - if(any.offset < 0 || any.offset + any.bytes > 0x400) - return -EINVAL; - if(any.bytes > 128) - return -EINVAL; - for (i = 0; i < any.bytes; i++) { - any.data[i] = - in_8((unsigned char *)pb->planb_base - + any.offset + i); - } - if(copy_to_user(arg,&any,sizeof(any))) - return -EFAULT; - return 0; - } - default: - { - DEBUG("PlanB: Unimplemented IOCTL\n"); - return -ENOIOCTLCMD; - } - /* Some IOCTLs are currently unsupported on PlanB */ - case VIDIOCGTUNER: { - DEBUG("PlanB: IOCTL VIDIOCGTUNER\n"); - goto unimplemented; } - case VIDIOCSTUNER: { - DEBUG("PlanB: IOCTL VIDIOCSTUNER\n"); - goto unimplemented; } - case VIDIOCSFREQ: { - DEBUG("PlanB: IOCTL VIDIOCSFREQ\n"); - goto unimplemented; } - case VIDIOCGFREQ: { - DEBUG("PlanB: IOCTL VIDIOCGFREQ\n"); - goto unimplemented; } - case VIDIOCKEY: { - DEBUG("PlanB: IOCTL VIDIOCKEY\n"); - goto unimplemented; } - case VIDIOCSAUDIO: { - DEBUG("PlanB: IOCTL VIDIOCSAUDIO\n"); - goto unimplemented; } - case VIDIOCGAUDIO: { - DEBUG("PlanB: IOCTL VIDIOCGAUDIO\n"); - goto unimplemented; } -unimplemented: - DEBUG(" Unimplemented\n"); - return -ENOIOCTLCMD; - } - return 0; -} - -static int planb_mmap(struct vm_area_struct *vma, struct video_device *dev, const char *adr, unsigned long size) -{ - int i; - struct planb *pb = (struct planb *)dev; - unsigned long start = (unsigned long)adr; - - if (size > MAX_GBUFFERS * PLANB_MAX_FBUF) - return -EINVAL; - if (!pb->rawbuf) { - int err; - if((err=grabbuf_alloc(pb))) - return err; - } - for (i = 0; i < pb->rawbuf_size; i++) { - unsigned long pfn; - - pfn = virt_to_phys((void *)pb->rawbuf[i]) >> PAGE_SHIFT; - if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED)) - return -EAGAIN; - start += PAGE_SIZE; - if (size <= PAGE_SIZE) - break; - size -= PAGE_SIZE; - } - return 0; -} - -static struct video_device planb_template= -{ - .owner = THIS_MODULE, - .name = PLANB_DEVICE_NAME, - .type = VID_TYPE_OVERLAY, - .hardware = VID_HARDWARE_PLANB, - .open = planb_open, - .close = planb_close, - .read = planb_read, - .write = planb_write, - .ioctl = planb_ioctl, - .mmap = planb_mmap, /* mmap? */ -}; - -static int init_planb(struct planb *pb) -{ - unsigned char saa_rev; - int i, result; - - memset ((void *) &pb->win, 0, sizeof (struct planb_window)); - /* Simple sanity check */ - if(def_norm >= NUM_SUPPORTED_NORM || def_norm < 0) { - printk(KERN_ERR "PlanB: Option(s) invalid\n"); - return -2; - } - pb->win.norm = def_norm; - pb->win.mode = PLANB_TV_MODE; /* TV mode */ - pb->win.interlace=1; - pb->win.x=0; - pb->win.y=0; - pb->win.width=768; /* 640 */ - pb->win.height=576; /* 480 */ - pb->maxlines=576; -#if 0 - btv->win.cropwidth=768; /* 640 */ - btv->win.cropheight=576; /* 480 */ - btv->win.cropx=0; - btv->win.cropy=0; -#endif - pb->win.pad=0; - pb->win.bpp=4; - pb->win.depth=32; - pb->win.color_fmt=PLANB_COLOUR32; - pb->win.bpl=1024*pb->win.bpp; - pb->win.swidth=1024; - pb->win.sheight=768; -#ifdef PLANB_GSCANLINE - if((pb->gbytes_per_line = PLANB_MAXPIXELS * 4) > PAGE_SIZE - || (pb->gbytes_per_line <= 0)) - return -3; - else { - /* page align pb->gbytes_per_line for DMA purpose */ - for(i = PAGE_SIZE; pb->gbytes_per_line < (i>>1);) - i>>=1; - pb->gbytes_per_line = i; - } -#endif - pb->tab_size = PLANB_MAXLINES + 40; - pb->suspend = 0; - mutex_init(&pb->lock); - pb->ch1_cmd = 0; - pb->ch2_cmd = 0; - pb->mask = 0; - pb->priv_space = 0; - pb->offset = 0; - pb->user = 0; - pb->overlay = 0; - init_waitqueue_head(&pb->suspendq); - pb->cmd_buff_inited = 0; - pb->frame_buffer_phys = 0; - - /* Reset DMA controllers */ - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - - saa_rev = (saa_status(0, pb) & 0xf0) >> 4; - printk(KERN_INFO "PlanB: SAA7196 video processor rev. %d\n", saa_rev); - /* Initialize the SAA registers in memory and on chip */ - saa_init_regs (pb); - - /* clear interrupt mask */ - pb->intr_mask = PLANB_CLR_IRQ; - - result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb); - if (result < 0) { - if (result==-EINVAL) - printk(KERN_ERR "PlanB: Bad irq number (%d) " - "or handler\n", (int)pb->irq); - else if (result==-EBUSY) - printk(KERN_ERR "PlanB: I don't know why, " - "but IRQ %d is busy\n", (int)pb->irq); - return result; - } - disable_irq(pb->irq); - - /* Now add the template and register the device unit. */ - memcpy(&pb->video_dev,&planb_template,sizeof(planb_template)); - - pb->picture.brightness=0x90<<8; - pb->picture.contrast = 0x70 << 8; - pb->picture.colour = 0x70<<8; - pb->picture.hue = 0x8000; - pb->picture.whiteness = 0; - pb->picture.depth = pb->win.depth; - - pb->frame_stat=NULL; - init_waitqueue_head(&pb->capq); - for(i=0; igbuf_idx[i] = PLANB_MAX_FBUF * i / PAGE_SIZE; - pb->gwidth[i]=0; - pb->gheight[i]=0; - pb->gfmt[i]=0; - pb->cap_cmd[i]=NULL; -#ifndef PLANB_GSCANLINE - pb->l_fr_addr_idx[i] = MAX_GBUFFERS * (PLANB_MAX_FBUF - / PAGE_SIZE + 1) + MAX_LNUM * i; - pb->lsize[i] = 0; - pb->lnum[i] = 0; -#endif - } - pb->rawbuf=NULL; - pb->grabbing=0; - - /* enable interrupts */ - out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ); - pb->intr_mask = PLANB_FRM_IRQ; - enable_irq(pb->irq); - - if(video_register_device(&pb->video_dev, VFL_TYPE_GRABBER, video_nr)<0) - return -1; - - return 0; -} - -/* - * Scan for a PlanB controller, request the irq and map the io memory - */ - -static int find_planb(void) -{ - struct planb *pb; - struct device_node *planb_devices; - unsigned char dev_fn, confreg, bus; - unsigned int old_base, new_base; - unsigned int irq; - struct pci_dev *pdev; - int rc; - - if (!machine_is(powermac)) - return 0; - - planb_devices = find_devices("planb"); - if (planb_devices == 0) { - planb_num=0; - printk(KERN_WARNING "PlanB: no device found!\n"); - return planb_num; - } - - if (planb_devices->next != NULL) - printk(KERN_ERR "Warning: only using first PlanB device!\n"); - pb = &planbs[0]; - planb_num = 1; - - if (planb_devices->n_addrs != 1) { - printk (KERN_WARNING "PlanB: expecting 1 address for planb " - "(got %d)", planb_devices->n_addrs); - return 0; - } - - if (planb_devices->n_intrs == 0) { - printk(KERN_WARNING "PlanB: no intrs for device %s\n", - planb_devices->full_name); - return 0; - } else { - irq = planb_devices->intrs[0].line; - } - - /* Initialize PlanB's PCI registers */ - - /* There is a bug with the way OF assigns addresses - to the devices behind the chaos bridge. - control needs only 0x1000 of space, but decodes only - the upper 16 bits. It therefore occupies a full 64K. - OF assigns the planb controller memory within this space; - so we need to change that here in order to access planb. */ - - /* We remap to 0xf1000000 in hope that nobody uses it ! */ - - bus = (planb_devices->addrs[0].space >> 16) & 0xff; - dev_fn = (planb_devices->addrs[0].space >> 8) & 0xff; - confreg = planb_devices->addrs[0].space & 0xff; - old_base = planb_devices->addrs[0].address; - new_base = 0xf1000000; - - DEBUG("PlanB: Found on bus %d, dev %d, func %d, " - "membase 0x%x (base reg. 0x%x)\n", - bus, PCI_SLOT(dev_fn), PCI_FUNC(dev_fn), old_base, confreg); - - pdev = pci_find_slot (bus, dev_fn); - if (!pdev) { - printk(KERN_ERR "planb: cannot find slot\n"); - goto err_out; - } - - /* Enable response in memory space, bus mastering, - use memory write and invalidate */ - rc = pci_enable_device(pdev); - if (rc) { - printk(KERN_ERR "planb: cannot enable PCI device %s\n", - pci_name(pdev)); - goto err_out; - } - rc = pci_set_mwi(pdev); - if (rc) { - printk(KERN_ERR "planb: cannot enable MWI on PCI device %s\n", - pci_name(pdev)); - goto err_out_disable; - } - pci_set_master(pdev); - - /* Set the new base address */ - pci_write_config_dword (pdev, confreg, new_base); - - planb_regs = (volatile struct planb_registers *) - ioremap (new_base, 0x400); - pb->planb_base = planb_regs; - pb->planb_base_phys = (struct planb_registers *)new_base; - pb->irq = irq; - - return planb_num; - -err_out_disable: - pci_disable_device(pdev); -err_out: - /* FIXME handle error */ /* comment moved from pci_find_slot, above */ - return 0; -} - -static void release_planb(void) -{ - int i; - struct planb *pb; - - for (i=0;iplanb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - - /* clear and free interrupts */ - pb->intr_mask = PLANB_CLR_IRQ; - out_le32 (&pb->planb_base->intr_stat, PLANB_CLR_IRQ); - free_irq(pb->irq, pb); - - /* make sure all allocated memory are freed */ - planb_prepare_close(pb); - - printk(KERN_INFO "PlanB: unregistering with v4l\n"); - video_unregister_device(&pb->video_dev); - - /* note that iounmap() does nothing on the PPC right now */ - iounmap ((void *)pb->planb_base); - } -} - -static int __init init_planbs(void) -{ - int i; - - if (find_planb()<=0) - return -EIO; - - for (i=0; i