Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Dang Huynh <danct12@riseup.net>
To:     Dang Huynh <danct12@riseup.net>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, martin.botka@somainline.org,
        marijn.suijten@somainline.org, paul.bouchara@somainline.org,
        angelogioacchino.delregno@somainline.org,
        Caleb Connolly <caleb@connolly.tech>
Subject: [PATCH v2 7/7] arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB
Date:   Mon,  8 Nov 2021 12:03:36 +0700
Message-Id: <20211108050336.3404559-8-danct12@riseup.net>
In-Reply-To: <20211108050336.3404559-1-danct12@riseup.net>
References: <20211108050336.3404559-1-danct12@riseup.net>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on the Redmi Note 7.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 .../boot/dts/qcom/sdm660-xiaomi-lavender.dts  | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 122b487f197b..a34812e91160 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -82,6 +82,15 @@ framebuffer_mem: memory@9d400000 {
 			no-map;
 		};
 	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &blsp1_uart2 {
@@ -98,6 +107,13 @@ voldown {
 	};
 };
 
+&qusb2phy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
 &rpm_requests {
 	pm660l-regulators {
 		compatible = "qcom,rpm-pm660l-regulators";
@@ -403,3 +419,12 @@ &sdhc_2 {
 &tlmm {
 	gpio-reserved-ranges = <8 4>;
 };
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
-- 
2.33.1