Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Greentime Hu <greentime.hu@sifive.com>
To:     palmer@dabbelt.com, paul.walmsley@sifive.com,
        linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
        aou@eecs.berkeley.edu
Subject: [PATCH v9 00/17] riscv: Add vector ISA support
Date:   Tue,  9 Nov 2021 17:48:12 +0800
Message-Id: <cover.1636362169.git.greentime.hu@sifive.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This patchset is implemented based on vector 1.0 spec to add vector support
in riscv Linux kernel. There are some assumptions for this implementations.

1. We assume all harts has the same ISA in the system.
2. We use vector like FPU in some ways instead of using vector like a
   specific IP.
3. We disable vector in kernel space by default unless kernel uses
   kernel mode vector kernel_rvv_begin()/kernel_rvv_end().
4. We detect "riscv,isa" to determine whether vector is support or not.

We defined a new structure __riscv_v_state in struct thread_struct to save
/restore the vector related registers. It is used for both kernel space and
user space.

 - In kernel space, the datap pointer in __riscv_v_state will be allocated
   to save vector registers.
 - In user space,
	- In signal handler of user space, datap will point to the address
          of the __riscv_v_state data structure to save vector registers
	  in stack. We also create a __reserved[] array in sigcontext for
	  future extensions.
	- In ptrace, the data will be put in ubuf in which we use
       	  riscv_vr_get()/riscv_vr_set() to get or set the
	  __riscv_v_state data structure from/to it, datap pointer
	  would be zeroed and vector registers will be copied to the
	  address right after the __riscv_v_state structure in ubuf.

This patchset also adds support for kernel mode vector, kernel XOR
implementation with vector ISA and includes several bug fixes and code
refinement.

This patchset is rebased to v5.15 and it is tested by running several
vector programs simultaneously. It also can get the correct ucontext_t in
signal handler and restore correct context after sigreturn. It is also
tested with ptrace() syscall to use PTRACE_GETREGSET/PTRACE_SETREGSET to
get/set the vector registers.

We have sent patches for vector support to glibc mailing list.

TODO
1. Refine the __riscv_v_state allocation in start_thread()
2. Refine the vector context switching functions by lazy save/restore
3. Add AMP support. To support harts with different ISA

 [1] https://github.com/riscv/riscv-v-spec/blob/master/v-spec.adoc
 [2] https://sourceware.org/pipermail/libc-alpha/2021-September/130897.html
 [3] https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v9

---
Changelog V9
 - Rebase to v5.15
 - Merge several patches
 - Refine codes
 - Fix a kernel panic issue

Changelog V8
 - Rebase to v5.14
 - Refine struct __riscv_v_state with struct __riscv_ctx_hdr
 - Refine has_vector into a static key
 - Defined __reserved space in struct sigcontext for vector and future extensions

Changelog V7
 - Add support for kernel mode vector
 - Add vector extension XOR implementation
 - Optimize task switch codes of vector
 - Allocate space for vector registers in start_thread()
 - Fix an illegal instruction exception when accessing vlenb
 - Optimize vector registers initialization
 - Initialize vector registers with proper vsetvli then it can work normally
 - Refine ptrace porting due to generic API changed
 - Code clean up

Changelog V6
 - Replace vle.v/vse.v instructions with vle8.v/vse8.v based on 0.9 spec
 - Add comments based on mailinglist feedback
 - Fix rv32 build error

Changelog V5
 - Using regset_size() correctly in generic ptrace
 - Fix the ptrace porting
 - Fix compile warning

Changelog V4
 - Support dynamic vlen
 - Fix bugs: lazy save/resotre, not saving vtype
 - Update VS bit offset based on latest vector spec
 - Add new vector csr based on latest vector spec
 - Code refine and removed unused macros

Changelog V3
 - Rebase linux-5.6-rc3 and tested with qemu
 - Seperate patches with Anup's advice
 - Give out a ABI puzzle with unlimited vlen

Changelog V2
 - Fixup typo "vecotr, fstate_save->vstate_save".
 - Fixup wrong saved registers' length in vector.S.
 - Seperate unrelated patches from this one.

Greentime Hu (11):
  riscv: Add new csr defines related to vector extension
  riscv: Add has_vector/riscv_vsize to save vector features.
  riscv: Add vector struct and assembler definitions
  riscv: Add task switch support for vector
  riscv: Add ptrace vector support
  riscv: Add sigcontext save/restore for vector
  riscv: Add support for kernel mode vector
  riscv: Use CSR_STATUS to replace sstatus in vector.S
  riscv: Add vector extension XOR implementation
  riscv: Fix an illegal instruction exception when accessing vlenb
    without enable vector first
  riscv: Fix a kernel panic issue if $s2 is set to a specific value
    before entering Linux

Guo Ren (5):
  riscv: Separate patch for cflags and aflags
  riscv: Rename __switch_to_aux -> fpu
  riscv: Extending cpufeature.c to detect V-extension
  riscv: Add vector feature to compile
  riscv: Reset vector register

Vincent Chen (1):
  riscv: signal: Report signal frame size to userspace via auxv

 arch/riscv/Kconfig                       |   9 ++
 arch/riscv/Makefile                      |  19 ++-
 arch/riscv/include/asm/csr.h             |  16 ++-
 arch/riscv/include/asm/elf.h             |  41 +++---
 arch/riscv/include/asm/processor.h       |   3 +
 arch/riscv/include/asm/switch_to.h       |  72 +++++++++-
 arch/riscv/include/asm/vector.h          |  16 +++
 arch/riscv/include/asm/xor.h             |  66 +++++++++
 arch/riscv/include/uapi/asm/auxvec.h     |   1 +
 arch/riscv/include/uapi/asm/hwcap.h      |   1 +
 arch/riscv/include/uapi/asm/ptrace.h     |  25 ++++
 arch/riscv/include/uapi/asm/sigcontext.h |  24 ++++
 arch/riscv/kernel/Makefile               |   2 +
 arch/riscv/kernel/asm-offsets.c          |   8 ++
 arch/riscv/kernel/cpufeature.c           |  16 +++
 arch/riscv/kernel/entry.S                |   6 +-
 arch/riscv/kernel/head.S                 |  24 +++-
 arch/riscv/kernel/kernel_mode_vector.c   | 146 +++++++++++++++++++
 arch/riscv/kernel/process.c              |  49 +++++++
 arch/riscv/kernel/ptrace.c               |  71 ++++++++++
 arch/riscv/kernel/setup.c                |   4 +
 arch/riscv/kernel/signal.c               | 173 ++++++++++++++++++++++-
 arch/riscv/kernel/vector.S               |  90 ++++++++++++
 arch/riscv/lib/Makefile                  |   1 +
 arch/riscv/lib/xor.S                     |  81 +++++++++++
 include/uapi/linux/elf.h                 |   1 +
 26 files changed, 929 insertions(+), 36 deletions(-)
 create mode 100644 arch/riscv/include/asm/vector.h
 create mode 100644 arch/riscv/include/asm/xor.h
 create mode 100644 arch/riscv/kernel/kernel_mode_vector.c
 create mode 100644 arch/riscv/kernel/vector.S
 create mode 100644 arch/riscv/lib/xor.S

-- 
2.31.1