From:   Bhupesh Sharma <bhupesh.sharma@linaro.org>
To:     linux-arm-msm@vger.kernel.org, linux-crypto@vger.kernel.org
Cc:     bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        robh+dt@kernel.org, agross@kernel.org, herbert@gondor.apana.org.au,
        davem@davemloft.net, stephan@gerhold.net,
        Thara Gopinath <thara.gopinath@linaro.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: [PATCH v5 13/22] dma: qcom: bam_dma: Add support to initialize interconnect path
Date:   Wed, 10 Nov 2021 16:29:13 +0530
Message-Id: <20211110105922.217895-14-bhupesh.sharma@linaro.org>
In-Reply-To: <20211110105922.217895-1-bhupesh.sharma@linaro.org>
References: <20211110105922.217895-1-bhupesh.sharma@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Thara Gopinath <thara.gopinath@linaro.org>

BAM dma engine associated with certain hardware blocks could require
relevant interconnect pieces be initialized prior to the dma engine
initialization. For e.g. crypto bam dma engine on sm8250. Such requirement
is passed on to the bam dma driver from dt via the "interconnects"
property.  Add support in bam_dma driver to check whether the interconnect
path is accessible/enabled prior to attempting driver intializations.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[Make header file inclusion alphabetical and use 'devm_of_icc_get()']
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/dma/qcom/bam_dma.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index c8a77b428b52..19fb17db467f 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/init.h>
+#include <linux/interconnect.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -392,6 +393,7 @@ struct bam_device {
 	const struct reg_offset_data *layout;
 
 	struct clk *bamclk;
+	struct icc_path *mem_path;
 	int irq;
 
 	/* dma start transaction tasklet */
@@ -1284,6 +1286,15 @@ static int bam_dma_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	/* Ensure that interconnects are initialized */
+	bdev->mem_path = devm_of_icc_get(bdev->dev, "memory");
+
+	if (IS_ERR(bdev->mem_path)) {
+		ret = PTR_ERR(bdev->mem_path);
+		dev_err(bdev->dev, "failed to acquire icc path %d\n", ret);
+		goto err_disable_clk;
+	}
+
 	ret = bam_init(bdev);
 	if (ret)
 		goto err_disable_clk;
-- 
2.31.1