From:   Li Yang <leoyang.li@nxp.com>
To:     Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        Ran Wang <ran.wang_1@nxp.com>, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH 10/11] arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes
Date:   Wed, 10 Nov 2021 16:21:59 -0600
Message-Id: <20211110222200.6780-11-leoyang.li@nxp.com>
In-Reply-To: <20211110222200.6780-1-leoyang.li@nxp.com>
References: <20211110222200.6780-1-leoyang.li@nxp.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Ran Wang <ran.wang_1@nxp.com>

Enable USB3 HW LPM feature for lx2160a.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 7835ad42da04..01b6075a2803 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1023,6 +1023,7 @@ usb0: usb@3100000 {
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			status = "disabled";
@@ -1034,6 +1035,7 @@ usb1: usb@3110000 {
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			status = "disabled";
-- 
2.25.1