From:   Hans de Goede <hdegoede@redhat.com>
To:     "Rafael J . Wysocki" <rjw@rjwysocki.net>,
        Mika Westerberg <mika.westerberg@linux.intel.com>,
        Mark Gross <markgross@kernel.org>,
        Andy Shevchenko <andy@infradead.org>,
        Wolfram Sang <wsa@the-dreams.de>,
        Sebastian Reichel <sre@kernel.org>,
        MyungJoo Ham <myungjoo.ham@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Ard Biesheuvel <ardb@kernel.org>
Cc:     Hans de Goede <hdegoede@redhat.com>, Len Brown <lenb@kernel.org>,
        linux-acpi@vger.kernel.org, Yauhen Kharuzhy <jekhor@gmail.com>,
        Tsuchiya Yuto <kitakar@gmail.com>,
        platform-driver-x86@vger.kernel.org, linux-i2c@vger.kernel.org,
        linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-efi@vger.kernel.org
Subject: [PATCH v2 02/20] power: supply: bq25890: Fix ADC continuous conversion setting when charging
Date:   Sun, 14 Nov 2021 18:03:17 +0100
Message-Id: <20211114170335.66994-3-hdegoede@redhat.com>
In-Reply-To: <20211114170335.66994-1-hdegoede@redhat.com>
References: <20211114170335.66994-1-hdegoede@redhat.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Yauhen Kharuzhy <jekhor@gmail.com>

Instead of one shot run of ADC at beginning of charging, run continuous
conversion to ensure that all charging-related values are monitored
properly (input voltage, input current, themperature etc.).

Fixes: 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip")
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/power/supply/bq25890_charger.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index 34ec186a2e9a..b7eac5428083 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -581,12 +581,12 @@ static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
 
 	if (!new_state.online && bq->state.online) {	    /* power removed */
 		/* disable ADC */
-		ret = bq25890_field_write(bq, F_CONV_START, 0);
+		ret = bq25890_field_write(bq, F_CONV_RATE, 0);
 		if (ret < 0)
 			goto error;
 	} else if (new_state.online && !bq->state.online) { /* power inserted */
 		/* enable ADC, to have control of charge current/voltage */
-		ret = bq25890_field_write(bq, F_CONV_START, 1);
+		ret = bq25890_field_write(bq, F_CONV_RATE, 1);
 		if (ret < 0)
 			goto error;
 	}
-- 
2.31.1