Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932428AbXAIWAf (ORCPT ); Tue, 9 Jan 2007 17:00:35 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932432AbXAIWAf (ORCPT ); Tue, 9 Jan 2007 17:00:35 -0500 Received: from yumi.tdiedrich.de ([85.10.210.183]:2336 "EHLO yumi.tdiedrich.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932428AbXAIWAe (ORCPT ); Tue, 9 Jan 2007 17:00:34 -0500 Date: Tue, 9 Jan 2007 23:00:30 +0100 From: Tobias Diedrich To: "Eric W. Biederman" Cc: Linus Torvalds , Yinghai Lu , Andrew Morton , Adrian Bunk , Andi Kleen , Linux Kernel Mailing List Subject: Re: [PATCH 4/4] x86_64 ioapic: Improve the heuristics for when check_timer fails. Message-ID: <20070109220029.GA2544@melchior.yamamaya.is-a-geek.org> Mail-Followup-To: Tobias Diedrich , "Eric W. Biederman" , Linus Torvalds , Yinghai Lu , Andrew Morton , Adrian Bunk , Andi Kleen , Linux Kernel Mailing List References: <5986589C150B2F49A46483AC44C7BCA490733F@ssvlexmb2.amd.com> <86802c440701022223q418bd141qf4de8ab149bf144b@mail.gmail.com> <20070108005556.GA2542@melchior.yamamaya.is-a-geek.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25208 Lines: 546 Eric W. Biederman wrote: > Tobias. I don't have a box with the problem yours does, and this > doesn't quite try any of the cases you have been asked to test > so could you please test this one? Works fine with BIOS 0402. patches/series: patch-2.6.20-rc4 patch-2.6.19-rc3-nokmem myconfig ccache x86_64_io_apic_fix_eric_20060108 hpet-quirk dmesg: Linux version 2.6.20-rc4-amd64 (ranma@melchior) (gcc version 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #56 Tue Jan 9 22:40:56 CET 2007 Command line: root=/dev/sda5 resume=/dev/sda6 vga=6 apic=verbose netconsole=@192.168.8.241/,514@255.255.255.255/ ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 261856) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7ce0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003feec2c0 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003feec400 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003feec200 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 261856) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 261856 On node 0 totalpages: 261759 DMA zone: 56 pages used for memmap DMA zone: 1358 pages reserved DMA zone: 2585 pages, LIFO batch:0 DMA32 zone: 3524 pages used for memmap DMA32 zone: 254236 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information mapped APIC to ffffffffff5fd000 ( fee00000) mapped IOAPIC to ffffffffff5fc000 (00000000fec00000) Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000) Built 1 zonelists. Total pages: 256821 Kernel command line: root=/dev/sda5 resume=/dev/sda6 vga=6 apic=verbose netconsole=@192.168.8.241/,514@255.255.255.255/ ro netconsole: local port 6665 netconsole: local IP 192.168.8.241 netconsole: interface eth0 netconsole: remote port 514 netconsole: remote IP 255.255.255.255 netconsole: remote ethernet address ff:ff:ff:ff:ff:ff Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) trying to force-enable HPET HPET force-enabled at 0xfef00000 time.c: Using 25.000000 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2009.512 MHz processor. Console: colour VGA+ 80x60 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ b2c2000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1025348k/1047424k available (3242k kernel code, 21444k reserved, 1470k data, 200k init) Calibrating delay using timer specific routine.. 4023.49 BogoMIPS (lpj=6703198) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02 ACPI: Core revision 20060707 ACPI (tbget-0289): Table [DSDT] replaced by host OS [20060707] enabled ExtINT on CPU#0 ESR value after enabling vector: 00000000, after 00000004 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x20 apic1=0 pin1=0 apic2=-1 pin2=-1 ..TIMER trying IO-APIC=0 PIN=0<3> .. failed ...apic 0 pin 2n use by irq 2 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..ExtINT trying IO-APIC=0 PIN=0 .. success Using local APIC timer interrupts. result 12559469 Detected 12.559 MHz APIC timer. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 PCI: No mmconfig possible on device 00:18 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Firmware left 0000:01:07.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:06.0 Boot video device is 0000:07:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init IOAPIC[0]: Set PCI routing entry (2-8 -> 0x28 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-13 -> 0x2d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-4 -> 0x24 -> IRQ 4 Mode:0 Active:0) pnp: PnP ACPI: found 11 devices SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 20 01 001 01 0 0 0 0 0 1 1 21 02 001 01 1 0 0 0 0 1 1 22 03 001 01 0 0 0 0 0 1 1 23 04 001 01 1 0 0 0 0 1 1 24 05 001 01 1 0 0 0 0 1 1 25 06 001 01 0 0 0 0 0 1 1 26 07 001 01 1 0 0 0 0 1 1 27 08 001 01 1 0 0 0 0 1 1 28 09 001 01 0 1 0 0 0 1 1 29 0a 001 01 1 0 0 0 0 1 1 2A 0b 001 01 1 0 0 0 0 1 1 2B 0c 001 01 0 0 0 0 0 1 1 2C 0d 001 01 1 0 0 0 0 1 1 2D 0e 001 01 0 0 0 0 0 1 1 2E 0f 001 01 0 0 0 0 0 1 1 2F 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. hpet0: at MMIO 0xfef00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz pnp: 00:01: ioport range 0x1000-0x107f could not be reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:06.0 IO window: d000-dfff MEM window: fdc00000-fdefffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: b000-cfff MEM window: fdb00000-fdbfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: a000-afff MEM window: fda00000-fdafffff PREFETCH window: e8000000-efffffff PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. fuse init (API version 7.8) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:0a.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0a.0:pcie00] Allocate Port Service[0000:00:0a.0:pcie03] PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] PCI: Setting latency timer of device 0000:00:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] Allocate Port Service[0000:00:0f.0:pcie03] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Getting cpuindex for acpiid 0x1 ACPI: Thermal Zone [THRM] (25 C) Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Linux agpgart interface v0.101 (c) Dave Jones loop: loaded (max 8 devices) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: eth0 doesn't exist, aborting. ahci 0000:06:00.0: version 2.0 ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0x69 -> IRQ 16 Mode:1 Active:1) ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:06:00.0 to 64 ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000064100 ctl 0x0 bmdma 0x0 irq 16 ata2: SATA max UDMA/133 cmd 0xFFFFC20000064180 ctl 0x0 bmdma 0x0 irq 16 scsi0 : ahci ata1: SATA link down (SStatus 0 SControl 300) scsi1 : ahci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda4 < sda5 sda6 > sd 1:0:0:0: Attached scsi disk sda sd 1:0:0:0: Attached scsi generic sg0 type 0 pata_amd 0000:00:04.0: version 0.2.7 PCI: Setting latency timer of device 0000:00:04.0 to 64 ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 scsi2 : pata_amd ata3.00: ATAPI, max UDMA/33 ata3.01: ATAPI, max UDMA/66 ata3.00: configured for UDMA/33 ata3.01: configured for UDMA/66 scsi3 : pata_amd ata4: port disabled. ignoring. ata4: reset failed, giving up scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.1A PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg1 type 5 scsi 2:0:1:0: CD-ROM PIONEER DVD-ROM DVD-106 1.22 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray sr 2:0:1:0: Attached scsi CD-ROM sr1 sr 2:0:1:0: Attached scsi generic sg2 type 5 block2mtd: version $Revision: 1.30 $ ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 IOAPIC[0]: Set PCI routing entry (2-23 -> 0x71 -> IRQ 23 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0x79 -> IRQ 22 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb usb2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 it87: Found IT8716F chip at 0x290, revision 0 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) md: raid1 personality registered for level 1 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com GACT probability on Mirror/redirect action on u32 classifier Performance counters on input device check on Actions configured nf_conntrack version 0.5.0 (4091 buckets, 32728 max) IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered TCP cubic registered TCP westwood registered TCP htcp registered TCP vegas registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 usb 1-2: new high speed USB device using ehci_hcd and address 2 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 200k freed usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 2-3: new full speed USB device using ohci_hcd and address 2 usb 2-3: configuration #1 chosen from 1 choice usb 2-4: new full speed USB device using ohci_hcd and address 3 usb 2-4: configuration #1 chosen from 1 choice usb 1-2.3: new low speed USB device using ehci_hcd and address 5 usb 1-2.3: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2.3 usb 1-2.4: new low speed USB device using ehci_hcd and address 6 usb 1-2.4: configuration #1 chosen from 1 choice input: HID 046a:0001 as /class/input/input3 input: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:02.1-2.4 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0x81 -> IRQ 21 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:08.0 to 64 forcedeth: using HIGHDMA usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 pl2303 2-4:1.0: pl2303 converter detected usb 2-4: pl2303 converter now attached to ttyUSB0 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation eth0: forcedeth.c: subsystem: 01043:8239 bound to 0000:00:08.0 ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0x89 -> IRQ 20 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:09.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 01043:8239 bound to 0000:00:09.0 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set PCI routing entry (2-17 -> 0x91 -> IRQ 17 Mode:1 Active:1) ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 e100: eth2: e100_probe: addr 0xfdeff000, irq 17, MAC addr 00:02:B3:1C:8B:4F gameport: EMU10K1 is pci0000:01:08.1/gameport0, io 0xd400, speed 1203kHz ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set PCI routing entry (2-18 -> 0x99 -> IRQ 18 Mode:1 Active:1) ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 ALSA sound/pci/emu10k1/emu10k1_main.c:1176: vendor=0x1102, device=0x2, subsystem_vendor_id=0x80641102, subsystem_id=0x8064 ALSA sound/pci/emu10k1/emu10k1_main.c:1201: Sound card name=SB Live 5.1 Adding 1951856k swap on /dev/sda6. Priority:-1 extents:1 across:1951856k EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: dm-4: found reiserfs format "3.6" with standard journal ReiserFS: dm-4: using ordered data mode ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-4: checking transaction log (dm-4) ReiserFS: dm-4: Using r5 hash to sort names lp: driver loaded but no devices found ppdev: user-space parallel port driver eth0: no IPv6 routers present -- Tobias PGP: http://9ac7e0bc.uguu.de このメールは十割再利用されたビットで作られています。 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/