Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932810AbXAJNrH (ORCPT ); Wed, 10 Jan 2007 08:47:07 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932818AbXAJNrH (ORCPT ); Wed, 10 Jan 2007 08:47:07 -0500 Received: from ms-smtp-02.ohiordc.rr.com ([65.24.5.136]:40203 "EHLO ms-smtp-02.ohiordc.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932810AbXAJNrB (ORCPT ); Wed, 10 Jan 2007 08:47:01 -0500 Subject: RE: PROBLEM: LSIFC909 mpt card fails to recognize devices From: Justin Rosander To: "Moore, Eric" Cc: Andrew Morton , linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org In-Reply-To: <664A4EBB07F29743873A87CF62C26D704E90EF@NAMAIL4.ad.lsil.com> References: <664A4EBB07F29743873A87CF62C26D704E90EF@NAMAIL4.ad.lsil.com> Content-Type: multipart/mixed; boundary="=-Hmvrz213OdcutZ4j6OWd" Date: Wed, 10 Jan 2007 08:46:50 -0500 Message-Id: <1168436810.5200.1.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.6.3 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 52018 Lines: 748 --=-Hmvrz213OdcutZ4j6OWd Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi Eric. Here you go. Let me know if there's anything else that you need . . . Regards, Justin On Mon, 2007-01-08 at 18:16 -0700, Moore, Eric wrote: > Justin wrote: > > > Success! Here you are > > Can you send the dmesg, boot.log, or messages from /var/log ? > > It appears you've sent me lspci output instead. > > Eric. --=-Hmvrz213OdcutZ4j6OWd Content-Disposition: attachment; filename=dmesg.log Content-Type: text/x-log; name=dmesg.log; charset=utf-8 Content-Transfer-Encoding: 7bit B) .data : 0xb02880d5 - 0xb0311f94 ( 551 kB) .text : 0xb0100000 - 0xb02880d5 (1568 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4008.13 BogoMIPS (lpj=2004067) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Sempron(tm) 2800+ stepping 00 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0e20) checking if image is initramfs... it is Freeing initrd memory: 4742k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON PCI: MSI-K8T-Neo2Fir, soundcard on Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4000-0x407f could not be reserved pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: e0000000-e1ffffff PREFETCH window: d8000000-dfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 7, 524288 bytes) TCP bind hash table entries: 8192 (order: 5, 229376 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1168417631.540:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI: (supports S0 S1 S4 S5) Switched to high resolution mode on CPU 0 Freeing unused kernel memory: 176k freed via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 eth0: VIA Rhine II at 0x1e000, 00:0f:ea:02:d9:a8, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 10, io mem 0xe3036000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT FC Host driver 3.04.02 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0a.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e3035000-e30357ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 11, io base 0x0000cc00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 11, io base 0x0000d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 11, io base 0x0000d400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 11, io base 0x0000d800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 mptbase: mpt_adapter_install mptbase: mem = d0940000, mem_phys = e3000000 mptbase: facts @ cfe1f2a4, pfacts[0] @ cfe1f2f4 mptbase: Initiating ioc0 bringup mptbase: ioc0: IOC operational unexpected mptbase: whoinit 0x2 statefault 0 force 0 mptbase: ioc0: Sending get IocFacts request req_sz=12 reply_sz=80 mptbase: ioc0: NB_for_64_byte_frame=2 NBShiftFactor=5 BlockSize=8 mptbase: ioc0: reply_sz= 80, reply_depth= 128 mptbase: ioc0: req_sz =128, req_depth =1023 mptbase: ioc0: Sending get PortFacts(0) request ioc0: FC909: Capabilities={Initiator,LAN} mptbase: ioc0 ReqToChain alloc @ ced75000, sz=4092 bytes mptbase: ioc0 RequestNB alloc @ cec4d000, sz=4092 bytes mptbase: ioc0 num_sge=25 numSGE=490 mptbase: ioc0 Now numSGE=40 num_sge=40 num_chain=3 mptbase: ioc0 ChainToChain alloc @ ced34800, sz=1524 bytes mptbase: ioc0.ReplyBuffer sz=80 bytes, ReplyDepth=128 mptbase: ioc0.ReplyBuffer sz=10240[2800] bytes mptbase: ioc0.RequestBuffer sz=128 bytes, RequestDepth=1023 mptbase: ioc0.RequestBuffer sz=130944[1ff80] bytes mptbase: ioc0.ChainBuffer sz=128 bytes, ChainDepth=381 mptbase: ioc0.ChainBuffer sz=48768[be80] bytes num_chain=381 mptbase: ioc0.Total alloc @ cee00000[1ee00000], sz=189952[2e600] bytes mptbase: ioc0 ReplyBuffers @ cee00000[1ee00000] mptbase: ioc0 RequestBuffers @ cee02800[1ee02800] mptbase :ioc0 ChainBuffers @ cee22780(1ee22780) mptbase: ioc0.SenseBuffers @ cedd0000[1edd0000] mptbase: ioc0.ReplyBuffers @ cee00000[1ee00000] mptbase: ioc0: facts.MsgVersion=100 mptbase: ioc0: Sending Port(0)Enable (req @ cf21bc20) mptbase: ioc0: INFO - Wait IOC_OPERATIONAL state (cnt=0) scsi0 : ioc0: LSIFC909, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11 VP_IDE: IDE controller at PCI slot 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA IRQ fixup for 0000:00:0f.0, from 255 to 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD1200JB-00GVC0, ATA DISK drive ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00a1037514] usb 1-4.3: new low speed USB device using ehci_hcd and address 4 usb 1-4.3: configuration #1 chosen from 1 choice hdb: TSSTcorpCD/DVDW SH-S182M, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... usb 1-4.4: new full speed USB device using ehci_hcd and address 5 usb 1-4.4: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... hdc: WDC WD307AA, ATA DISK drive usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Gyration GyroPoint RF Technology Receiver as /class/input/input0 input: USB HID v1.00 Keyboard [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:10.4-4.3 input: Gyration GyroPoint RF Technology Receiver as /class/input/input1 input,hiddev96: USB HID v1.00 Mouse [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:10.4-4.3 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: Host Protected Area detected. current capacity is 234439535 sectors (120033 MB) native capacity is 234441648 sectors (120034 MB) hda: Host Protected Area disabled. hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 > hdc: max request size: 128KiB hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdc: Host Protected Area detected. current capacity is 60072671 sectors (30757 MB) native capacity is 60074784 sectors (30758 MB) hdc: Host Protected Area disabled. hdc: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=59598/16/63, UDMA(66) hdc: cache flushes not supported hdc: hdc1 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A scsi 1:0:0:0: Direct-Access HP psc 2410 1.00 PQ: 0 ANSI: 2 usb-storage: device scan complete Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3611 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver input: PC Speaker as /class/input/input2 mice: PS/2 mouse device common for all mice Linux agpgart interface v0.101 (c) Dave Jones eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Real Time Clock Driver v1.12ac Floppy drive(s): fd0 is 1.44M gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 946kHz FDC 0 is a post-1991 82077 Bluetooth: HCI USB driver ver 2.9 Linux video capture interface: v2.00 usbcore: registered new interface driver hci_usb agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: AGP aperture is 128M @ 0xd0000000 saa7130/34: v4l2 driver version 0.2.14 loaded ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 saa7133[0]: found at 0000:00:0b.0, rev: 16, irq: 11, latency: 32, mmio: 0xe3034000 saa7133[0]: subsystem: 1043:4843, board: ASUS TV-FM 7133 [card=25,autodetected] saa7133[0]: board init: gpio is 0 sd 1:0:0:0: Attached scsi removable disk sda pci_hotplug: PCI Hot Plug PCI Core version: 0.5 saa7133[0]: i2c eeprom 00: 43 10 43 48 ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 0-0043: chip found @ 0x86 (saa7133[0]) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0060: All bytes are equal. It is not a TEA5767 tuner 0-0060: chip found @ 0xc0 (saa7133[0]) tuner 0-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) tuner 0-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Installing spdif_bug patch: Audigy 2 ZS [SB0353] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Adding 497952k swap on /dev/hda5. Priority:-1 extents:1 across:497952k EXT3 FS on hda2, internal journal it87: Found IT8705F chip at 0x290, revision 3 it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver eth0: no IPv6 routers present --=-Hmvrz213OdcutZ4j6OWd Content-Disposition: attachment; filename=messages1.log Content-Type: text/x-log; name=messages1.log; charset=utf-8 Content-Transfer-Encoding: 7bit Jan 10 00:00:32 localhost -- MARK -- Jan 10 00:20:32 localhost -- MARK -- Jan 10 00:21:25 localhost gconfd (root-6556): starting (version 2.16.0), pid 6556 user 'root' Jan 10 00:21:25 localhost gconfd (root-6556): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 10 00:21:25 localhost gconfd (root-6556): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 10 00:21:25 localhost gconfd (root-6556): Resolved address "xml:readonly:/usr/share/cdd/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 10 00:21:25 localhost gconfd (root-6556): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3 Jan 10 00:21:25 localhost gconfd (root-6556): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 4 Jan 10 00:21:25 localhost gconfd (root-6556): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 5 Jan 10 00:31:25 localhost gconfd (root-6556): GConf server is not in use, shutting down. Jan 10 00:31:25 localhost gconfd (root-6556): Exiting Jan 10 00:41:18 localhost gconfd (root-7200): starting (version 2.16.0), pid 7200 user 'root' Jan 10 00:41:18 localhost gconfd (root-7200): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 10 00:41:18 localhost gconfd (root-7200): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 10 00:41:18 localhost gconfd (root-7200): Resolved address "xml:readonly:/usr/share/cdd/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 10 00:41:18 localhost gconfd (root-7200): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3 Jan 10 00:41:18 localhost gconfd (root-7200): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 4 Jan 10 00:41:18 localhost gconfd (root-7200): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 5 Jan 10 00:42:48 localhost gconfd (root-7200): GConf server is not in use, shutting down. Jan 10 00:42:48 localhost gconfd (root-7200): Exiting Jan 10 00:50:35 localhost gconfd (root-7607): starting (version 2.16.0), pid 7607 user 'root' Jan 10 00:50:35 localhost gconfd (root-7607): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 10 00:50:35 localhost gconfd (root-7607): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 10 00:50:35 localhost gconfd (root-7607): Resolved address "xml:readonly:/usr/share/cdd/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 10 00:50:35 localhost gconfd (root-7607): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3 Jan 10 00:50:35 localhost gconfd (root-7607): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 4 Jan 10 00:50:35 localhost gconfd (root-7607): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 5 Jan 10 00:51:05 localhost gconfd (root-7607): GConf server is not in use, shutting down. Jan 10 00:51:05 localhost gconfd (root-7607): Exiting Jan 10 00:54:21 localhost gconfd (root-7705): starting (version 2.16.0), pid 7705 user 'root' Jan 10 00:54:21 localhost gconfd (root-7705): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 10 00:54:21 localhost gconfd (root-7705): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 10 00:54:21 localhost gconfd (root-7705): Resolved address "xml:readonly:/usr/share/cdd/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 10 00:54:21 localhost gconfd (root-7705): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3 Jan 10 00:54:21 localhost gconfd (root-7705): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 4 Jan 10 00:54:21 localhost gconfd (root-7705): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 5 Jan 10 00:56:21 localhost gconfd (root-7705): GConf server is not in use, shutting down. Jan 10 00:56:21 localhost gconfd (root-7705): Exiting Jan 10 01:06:37 localhost gconfd (myrddin-5073): Exiting Jan 10 01:06:37 localhost gconfd (myrddin-8092): starting (version 2.16.0), pid 8092 user 'myrddin' Jan 10 01:06:38 localhost gconfd (myrddin-8092): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 10 01:06:38 localhost gconfd (myrddin-8092): Resolved address "xml:readwrite:/home/myrddin/.gconf" to a writable configuration source at position 1 Jan 10 01:06:38 localhost gconfd (myrddin-8092): Resolved address "xml:readonly:/usr/share/cdd/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 10 01:06:38 localhost gconfd (myrddin-8092): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3 Jan 10 01:06:38 localhost gconfd (myrddin-8092): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 4 Jan 10 01:06:38 localhost gconfd (myrddin-8092): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 5 Jan 10 01:07:00 localhost kernel: agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. Jan 10 01:07:00 localhost kernel: agpgart: Device is in legacy mode, falling back to 2.x Jan 10 01:07:00 localhost kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode Jan 10 01:07:00 localhost kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode Jan 10 01:07:08 localhost gconfd (myrddin-8092): GConf server is not in use, shutting down. Jan 10 01:07:08 localhost gconfd (myrddin-8092): Exiting Jan 10 01:07:08 localhost gconfd (myrddin-8283): starting (version 2.16.0), pid 8283 user 'myrddin' Jan 10 01:07:08 localhost gconfd (myrddin-8283): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 10 01:07:08 localhost gconfd (myrddin-8283): Resolved address "xml:readwrite:/home/myrddin/.gconf" to a writable configuration source at position 1 Jan 10 01:07:08 localhost gconfd (myrddin-8283): Resolved address "xml:readonly:/usr/share/cdd/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 10 01:07:08 localhost gconfd (myrddin-8283): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3 Jan 10 01:07:08 localhost gconfd (myrddin-8283): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 4 Jan 10 01:07:08 localhost gconfd (myrddin-8283): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 5 Jan 10 01:07:10 localhost gconfd (myrddin-8283): Resolved address "xml:readwrite:/home/myrddin/.gconf" to a writable configuration source at position 0 Jan 10 01:20:32 localhost -- MARK -- Jan 10 01:40:32 localhost -- MARK -- Jan 10 02:00:32 localhost -- MARK -- Jan 10 02:20:32 localhost -- MARK -- Jan 10 02:40:32 localhost -- MARK -- Jan 10 03:00:32 localhost -- MARK -- Jan 10 03:20:32 localhost -- MARK -- Jan 10 03:40:32 localhost -- MARK -- Jan 10 04:00:32 localhost -- MARK -- Jan 10 04:20:32 localhost -- MARK -- Jan 10 04:40:32 localhost -- MARK -- Jan 10 05:00:32 localhost -- MARK -- Jan 10 05:20:32 localhost -- MARK -- Jan 10 05:40:32 localhost -- MARK -- Jan 10 06:00:32 localhost -- MARK -- Jan 10 06:20:32 localhost -- MARK -- Jan 10 06:40:32 localhost -- MARK -- Jan 10 07:00:32 localhost -- MARK -- Jan 10 07:20:32 localhost -- MARK -- Jan 10 07:40:32 localhost -- MARK -- Jan 10 08:00:32 localhost -- MARK -- Jan 10 08:20:32 localhost -- MARK -- Jan 10 08:25:50 localhost gconfd (myrddin-8283): Exiting Jan 10 08:25:50 localhost gconfd (myrddin-19099): starting (version 2.16.0), pid 19099 user 'myrddin' Jan 10 08:25:50 localhost gconfd (myrddin-19099): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 10 08:25:50 localhost gconfd (myrddin-19099): Resolved address "xml:readwrite:/home/myrddin/.gconf" to a writable configuration source at position 1 Jan 10 08:25:50 localhost gconfd (myrddin-19099): Resolved address "xml:readonly:/usr/share/cdd/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 10 08:25:50 localhost gconfd (myrddin-19099): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3 Jan 10 08:25:50 localhost gconfd (myrddin-19099): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 4 Jan 10 08:25:50 localhost gconfd (myrddin-19099): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 5 Jan 10 08:25:59 localhost shutdown[8121]: shutting down for system reboot Jan 10 08:26:05 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Jan 10 08:26:05 localhost kernel: apm: disabled on user request. Jan 10 08:26:19 localhost kernel: Kernel logging (proc) stopped. Jan 10 08:26:19 localhost kernel: Kernel log daemon terminating. Jan 10 08:26:20 localhost gconfd (myrddin-19099): GConf server is not in use, shutting down. Jan 10 08:26:20 localhost gconfd (myrddin-19099): Exiting Jan 10 08:26:20 localhost exiting on signal 15 Jan 10 08:27:32 localhost syslogd 1.4.1#18: restart. Jan 10 08:27:32 localhost kernel: klogd 1.4.1#18, log source = /proc/kmsg started. Jan 10 08:27:32 localhost kernel: 00 ( 759 MB) Jan 10 08:27:32 localhost kernel: lowmem : 0xb0000000 - 0xcfff0000 ( 511 MB) Jan 10 08:27:32 localhost kernel: .init : 0xb0314000 - 0xb0340000 ( 176 kB) Jan 10 08:27:32 localhost kernel: .data : 0xb02880d5 - 0xb0311f94 ( 551 kB) Jan 10 08:27:32 localhost kernel: .text : 0xb0100000 - 0xb02880d5 (1568 kB) Jan 10 08:27:32 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Jan 10 08:27:32 localhost kernel: Calibrating delay using timer specific routine.. 4008.13 BogoMIPS (lpj=2004067) Jan 10 08:27:32 localhost kernel: Security Framework v1.0.0 initialized Jan 10 08:27:32 localhost kernel: SELinux: Disabled at boot. Jan 10 08:27:32 localhost kernel: Capability LSM initialized Jan 10 08:27:32 localhost kernel: Mount-cache hash table entries: 512 Jan 10 08:27:32 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jan 10 08:27:32 localhost kernel: CPU: L2 Cache: 256K (64 bytes/line) Jan 10 08:27:32 localhost kernel: Intel machine check architecture supported. Jan 10 08:27:32 localhost kernel: Intel machine check reporting enabled on CPU#0. Jan 10 08:27:32 localhost kernel: Compat vDSO mapped to ffffe000. Jan 10 08:27:32 localhost kernel: CPU: AMD Sempron(tm) 2800+ stepping 00 Jan 10 08:27:32 localhost kernel: Checking 'hlt' instruction... OK. Jan 10 08:27:32 localhost kernel: ACPI: Core revision 20060707 Jan 10 08:27:32 localhost kernel: ACPI: setting ELCR to 0200 (from 0e20) Jan 10 08:27:32 localhost kernel: checking if image is initramfs... it is Jan 10 08:27:32 localhost kernel: Freeing initrd memory: 4742k freed Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 16 Jan 10 08:27:32 localhost kernel: ACPI: bus type pci registered Jan 10 08:27:32 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=1 Jan 10 08:27:32 localhost kernel: PCI: Using configuration type 1 Jan 10 08:27:32 localhost kernel: Setting up standard PCI resources Jan 10 08:27:32 localhost kernel: ACPI: Interpreter enabled Jan 10 08:27:32 localhost kernel: ACPI: Using PIC for interrupt routing Jan 10 08:27:32 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Jan 10 08:27:32 localhost kernel: PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON Jan 10 08:27:32 localhost kernel: PCI: MSI-K8T-Neo2Fir, soundcard on Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. Jan 10 08:27:32 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Jan 10 08:27:32 localhost kernel: pnp: PnP ACPI init Jan 10 08:27:32 localhost kernel: pnp: PnP ACPI: found 13 devices Jan 10 08:27:32 localhost kernel: PnPBIOS: Disabled by ACPI PNP Jan 10 08:27:32 localhost kernel: PCI: Using ACPI for IRQ routing Jan 10 08:27:32 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Jan 10 08:27:32 localhost kernel: pnp: 00:02: ioport range 0x4000-0x407f could not be reserved Jan 10 08:27:32 localhost kernel: pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved Jan 10 08:27:32 localhost kernel: pnp: 00:02: ioport range 0x5000-0x500f has been reserved Jan 10 08:27:32 localhost kernel: PCI: Bridge: 0000:00:01.0 Jan 10 08:27:32 localhost kernel: IO window: disabled. Jan 10 08:27:32 localhost kernel: MEM window: e0000000-e1ffffff Jan 10 08:27:32 localhost kernel: PREFETCH window: d8000000-dfffffff Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 2 Jan 10 08:27:32 localhost kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes) Jan 10 08:27:32 localhost kernel: TCP established hash table entries: 16384 (order: 7, 524288 bytes) Jan 10 08:27:32 localhost kernel: TCP bind hash table entries: 8192 (order: 5, 229376 bytes) Jan 10 08:27:32 localhost kernel: TCP: Hash tables configured (established 16384 bind 8192) Jan 10 08:27:32 localhost kernel: TCP reno registered Jan 10 08:27:32 localhost kernel: audit: initializing netlink socket (disabled) Jan 10 08:27:32 localhost kernel: audit(1168417631.540:1): initialized Jan 10 08:27:32 localhost kernel: VFS: Disk quotas dquot_6.5.1 Jan 10 08:27:32 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 10 08:27:32 localhost kernel: io scheduler noop registered Jan 10 08:27:32 localhost kernel: io scheduler anticipatory registered (default) Jan 10 08:27:32 localhost kernel: io scheduler deadline registered Jan 10 08:27:32 localhost kernel: io scheduler cfq registered Jan 10 08:27:32 localhost kernel: isapnp: Scanning for PnP cards... Jan 10 08:27:32 localhost kernel: isapnp: No Plug & Play device found Jan 10 08:27:32 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Jan 10 08:27:32 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 10 08:27:32 localhost kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 10 08:27:32 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Jan 10 08:27:32 localhost kernel: PNP: No PS/2 controller found. Probing ports directly. Jan 10 08:27:32 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 10 08:27:32 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 10 08:27:32 localhost kernel: TCP bic registered Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 1 Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 17 Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 8 Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 20 Jan 10 08:27:32 localhost kernel: Using IPI Shortcut mode Jan 10 08:27:32 localhost kernel: ACPI: (supports S0 S1 S4 S5) Jan 10 08:27:32 localhost kernel: Switched to high resolution mode on CPU 0 Jan 10 08:27:32 localhost kernel: Freeing unused kernel memory: 176k freed Jan 10 08:27:32 localhost kernel: via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: eth0: VIA Rhine II at 0x1e000, 00:0f:ea:02:d9:a8, IRQ 11. Jan 10 08:27:32 localhost kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. Jan 10 08:27:32 localhost kernel: usbcore: registered new interface driver usbfs Jan 10 08:27:32 localhost kernel: usbcore: registered new interface driver hub Jan 10 08:27:32 localhost kernel: usbcore: registered new device driver usb Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Jan 10 08:27:32 localhost kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller Jan 10 08:27:32 localhost kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 Jan 10 08:27:32 localhost kernel: ehci_hcd 0000:00:10.4: irq 10, io mem 0xe3036000 Jan 10 08:27:32 localhost kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jan 10 08:27:32 localhost kernel: usb usb1: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: hub 1-0:1.0: USB hub found Jan 10 08:27:32 localhost kernel: hub 1-0:1.0: 8 ports detected Jan 10 08:27:32 localhost kernel: USB Universal Host Controller Interface driver v3.0 Jan 10 08:27:32 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 10 08:27:32 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 10 08:27:32 localhost kernel: SCSI subsystem initialized Jan 10 08:27:32 localhost kernel: Fusion MPT base driver 3.04.02 Jan 10 08:27:32 localhost kernel: Copyright (c) 1999-2005 LSI Logic Corporation Jan 10 08:27:32 localhost kernel: Fusion MPT FC Host driver 3.04.02 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:0a.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e3035000-e30357ff] Max Packet=[2048] IR/IT contexts=[4/8] Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.0: irq 11, io base 0x0000cc00 Jan 10 08:27:32 localhost kernel: usb usb2: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: hub 2-0:1.0: USB hub found Jan 10 08:27:32 localhost kernel: hub 2-0:1.0: 2 ports detected Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.1: irq 11, io base 0x0000d000 Jan 10 08:27:32 localhost kernel: usb usb3: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: hub 3-0:1.0: USB hub found Jan 10 08:27:32 localhost kernel: hub 3-0:1.0: 2 ports detected Jan 10 08:27:32 localhost kernel: usb 1-4: new high speed USB device using ehci_hcd and address 2 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.2: irq 11, io base 0x0000d400 Jan 10 08:27:32 localhost kernel: usb usb4: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: hub 4-0:1.0: USB hub found Jan 10 08:27:32 localhost kernel: hub 4-0:1.0: 2 ports detected Jan 10 08:27:32 localhost kernel: usb 1-4: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: hub 1-4:1.0: USB hub found Jan 10 08:27:32 localhost kernel: hub 1-4:1.0: 4 ports detected Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 Jan 10 08:27:32 localhost kernel: uhci_hcd 0000:00:10.3: irq 11, io base 0x0000d800 Jan 10 08:27:32 localhost kernel: usb usb5: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: hub 5-0:1.0: USB hub found Jan 10 08:27:32 localhost kernel: hub 5-0:1.0: 2 ports detected Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: mptbase: mpt_adapter_install Jan 10 08:27:32 localhost kernel: mptbase: mem = d0940000, mem_phys = e3000000 Jan 10 08:27:32 localhost kernel: mptbase: facts @ cfe1f2a4, pfacts[0] @ cfe1f2f4 Jan 10 08:27:32 localhost kernel: mptbase: Initiating ioc0 bringup Jan 10 08:27:32 localhost kernel: mptbase: ioc0: IOC operational unexpected Jan 10 08:27:32 localhost kernel: mptbase: whoinit 0x2 statefault 0 force 0 Jan 10 08:27:32 localhost kernel: mptbase: ioc0: Sending get IocFacts request req_sz=12 reply_sz=80 Jan 10 08:27:32 localhost kernel: mptbase: ioc0: NB_for_64_byte_frame=2 NBShiftFactor=5 BlockSize=8 Jan 10 08:27:32 localhost kernel: mptbase: ioc0: reply_sz= 80, reply_depth= 128 Jan 10 08:27:32 localhost kernel: mptbase: ioc0: req_sz =128, req_depth =1023 Jan 10 08:27:32 localhost kernel: mptbase: ioc0: Sending get PortFacts(0) request Jan 10 08:27:32 localhost kernel: ioc0: FC909: Capabilities={Initiator,LAN} Jan 10 08:27:32 localhost kernel: mptbase: ioc0 ReqToChain alloc @ ced75000, sz=4092 bytes Jan 10 08:27:32 localhost kernel: mptbase: ioc0 RequestNB alloc @ cec4d000, sz=4092 bytes Jan 10 08:27:32 localhost kernel: mptbase: ioc0 num_sge=25 numSGE=490 Jan 10 08:27:32 localhost kernel: mptbase: ioc0 Now numSGE=40 num_sge=40 num_chain=3 Jan 10 08:27:32 localhost kernel: mptbase: ioc0 ChainToChain alloc @ ced34800, sz=1524 bytes Jan 10 08:27:32 localhost kernel: mptbase: ioc0.ReplyBuffer sz=80 bytes, ReplyDepth=128 Jan 10 08:27:32 localhost kernel: mptbase: ioc0.ReplyBuffer sz=10240[2800] bytes Jan 10 08:27:32 localhost kernel: mptbase: ioc0.RequestBuffer sz=128 bytes, RequestDepth=1023 Jan 10 08:27:32 localhost kernel: mptbase: ioc0.RequestBuffer sz=130944[1ff80] bytes Jan 10 08:27:32 localhost kernel: mptbase: ioc0.ChainBuffer sz=128 bytes, ChainDepth=381 Jan 10 08:27:32 localhost kernel: mptbase: ioc0.ChainBuffer sz=48768[be80] bytes num_chain=381 Jan 10 08:27:32 localhost kernel: mptbase: ioc0.Total alloc @ cee00000[1ee00000], sz=189952[2e600] bytes Jan 10 08:27:32 localhost kernel: mptbase: ioc0 ReplyBuffers @ cee00000[1ee00000] Jan 10 08:27:32 localhost kernel: mptbase: ioc0 RequestBuffers @ cee02800[1ee02800] Jan 10 08:27:32 localhost kernel: mptbase :ioc0 ChainBuffers @ cee22780(1ee22780) Jan 10 08:27:32 localhost kernel: mptbase: ioc0.SenseBuffers @ cedd0000[1edd0000] Jan 10 08:27:32 localhost kernel: mptbase: ioc0.ReplyBuffers @ cee00000[1ee00000] Jan 10 08:27:32 localhost kernel: mptbase: ioc0: facts.MsgVersion=100 Jan 10 08:27:32 localhost kernel: mptbase: ioc0: Sending Port(0)Enable (req @ cf21bc20) Jan 10 08:27:32 localhost kernel: mptbase: ioc0: INFO - Wait IOC_OPERATIONAL state (cnt=0) Jan 10 08:27:32 localhost kernel: scsi0 : ioc0: LSIFC909, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11 Jan 10 08:27:32 localhost kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.0 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: PCI: VIA IRQ fixup for 0000:00:0f.0, from 255 to 11 Jan 10 08:27:32 localhost kernel: VP_IDE: chipset revision 6 Jan 10 08:27:32 localhost kernel: VP_IDE: not 100%% native mode: will probe irqs later Jan 10 08:27:32 localhost kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 Jan 10 08:27:32 localhost kernel: ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:DMA Jan 10 08:27:32 localhost kernel: ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:DMA, hdd:pio Jan 10 08:27:32 localhost kernel: hda: WDC WD1200JB-00GVC0, ATA DISK drive Jan 10 08:27:32 localhost kernel: usb 1-4.3: new low speed USB device using ehci_hcd and address 4 Jan 10 08:27:32 localhost kernel: usb 1-4.3: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: hdb: TSSTcorpCD/DVDW SH-S182M, ATAPI CD/DVD-ROM drive Jan 10 08:27:32 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 10 08:27:32 localhost kernel: usb 1-4.4: new full speed USB device using ehci_hcd and address 5 Jan 10 08:27:32 localhost kernel: usb 1-4.4: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: Initializing USB Mass Storage driver... Jan 10 08:27:32 localhost kernel: hdc: WDC WD307AA, ATA DISK drive Jan 10 08:27:32 localhost kernel: usb 5-2: new full speed USB device using uhci_hcd and address 2 Jan 10 08:27:32 localhost kernel: usb 5-2: configuration #1 chosen from 1 choice Jan 10 08:27:32 localhost kernel: usbcore: registered new interface driver hiddev Jan 10 08:27:32 localhost kernel: input: Gyration GyroPoint RF Technology Receiver as /class/input/input0 Jan 10 08:27:32 localhost kernel: input: USB HID v1.00 Keyboard [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:10.4-4.3 Jan 10 08:27:32 localhost kernel: input: Gyration GyroPoint RF Technology Receiver as /class/input/input1 Jan 10 08:27:32 localhost kernel: input,hiddev96: USB HID v1.00 Mouse [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:10.4-4.3 Jan 10 08:27:32 localhost kernel: usbcore: registered new interface driver usbhid Jan 10 08:27:32 localhost kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver Jan 10 08:27:32 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Jan 10 08:27:32 localhost kernel: usbcore: registered new interface driver usb-storage Jan 10 08:27:32 localhost kernel: USB Mass Storage support registered. Jan 10 08:27:32 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jan 10 08:27:32 localhost kernel: hda: max request size: 512KiB Jan 10 08:27:32 localhost kernel: hda: Host Protected Area detected. Jan 10 08:27:32 localhost kernel: ^Icurrent capacity is 234439535 sectors (120033 MB) Jan 10 08:27:32 localhost kernel: ^Inative capacity is 234441648 sectors (120034 MB) Jan 10 08:27:32 localhost kernel: hda: Host Protected Area disabled. Jan 10 08:27:32 localhost kernel: hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33) Jan 10 08:27:32 localhost kernel: hda: cache flushes supported Jan 10 08:27:32 localhost kernel: hda: hda1 hda2 hda3 < hda5 > Jan 10 08:27:32 localhost kernel: hdc: max request size: 128KiB Jan 10 08:27:32 localhost kernel: hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Jan 10 08:27:32 localhost kernel: Uniform CD-ROM driver Revision: 3.20 Jan 10 08:27:32 localhost kernel: hdc: Host Protected Area detected. Jan 10 08:27:32 localhost kernel: ^Icurrent capacity is 60072671 sectors (30757 MB) Jan 10 08:27:32 localhost kernel: ^Inative capacity is 60074784 sectors (30758 MB) Jan 10 08:27:32 localhost kernel: hdc: Host Protected Area disabled. Jan 10 08:27:32 localhost kernel: hdc: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=59598/16/63, UDMA(66) Jan 10 08:27:32 localhost kernel: hdc: cache flushes not supported Jan 10 08:27:32 localhost kernel: hdc: hdc1 Jan 10 08:27:32 localhost kernel: Attempting manual resume Jan 10 08:27:32 localhost kernel: kjournald starting. Commit interval 5 seconds Jan 10 08:27:32 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 10 08:27:32 localhost kernel: parport: PnPBIOS parport detected. Jan 10 08:27:32 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Jan 10 08:27:32 localhost kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 10 08:27:32 localhost kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 10 08:27:32 localhost kernel: scsi 1:0:0:0: Direct-Access HP psc 2410 1.00 PQ: 0 ANSI: 2 Jan 10 08:27:32 localhost kernel: Bluetooth: Core ver 2.11 Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 31 Jan 10 08:27:32 localhost kernel: Bluetooth: HCI device and connection manager initialized Jan 10 08:27:32 localhost kernel: Bluetooth: HCI socket layer initialized Jan 10 08:27:32 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3611 Jan 10 08:27:32 localhost kernel: usbcore: registered new interface driver usblp Jan 10 08:27:32 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Jan 10 08:27:32 localhost kernel: input: PC Speaker as /class/input/input2 Jan 10 08:27:32 localhost kernel: mice: PS/2 mouse device common for all mice Jan 10 08:27:32 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones Jan 10 08:27:32 localhost kernel: eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Jan 10 08:27:32 localhost kernel: Real Time Clock Driver v1.12ac Jan 10 08:27:32 localhost kernel: Floppy drive(s): fd0 is 1.44M Jan 10 08:27:32 localhost kernel: gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 946kHz Jan 10 08:27:32 localhost kernel: FDC 0 is a post-1991 82077 Jan 10 08:27:32 localhost kernel: Bluetooth: HCI USB driver ver 2.9 Jan 10 08:27:32 localhost kernel: Linux video capture interface: v2.00 Jan 10 08:27:32 localhost kernel: usbcore: registered new interface driver hci_usb Jan 10 08:27:32 localhost kernel: agpgart: Detected VIA KT400/KT400A/KT600 chipset Jan 10 08:27:32 localhost kernel: agpgart: AGP aperture is 128M @ 0xd0000000 Jan 10 08:27:32 localhost kernel: saa7130/34: v4l2 driver version 0.2.14 loaded Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Jan 10 08:27:32 localhost kernel: saa7133[0]: found at 0000:00:0b.0, rev: 16, irq: 11, latency: 32, mmio: 0xe3034000 Jan 10 08:27:32 localhost kernel: saa7133[0]: subsystem: 1043:4843, board: ASUS TV-FM 7133 [card=25,autodetected] Jan 10 08:27:32 localhost kernel: saa7133[0]: board init: gpio is 0 Jan 10 08:27:32 localhost kernel: sd 1:0:0:0: Attached scsi removable disk sda Jan 10 08:27:32 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 00: 43 10 43 48 ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jan 10 08:27:32 localhost kernel: tuner 0-0043: chip found @ 0x86 (saa7133[0]) Jan 10 08:27:32 localhost kernel: tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) Jan 10 08:27:32 localhost kernel: tuner 0-0060: All bytes are equal. It is not a TEA5767 Jan 10 08:27:32 localhost kernel: tuner 0-0060: chip found @ 0xc0 (saa7133[0]) Jan 10 08:27:32 localhost kernel: tuner 0-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) Jan 10 08:27:32 localhost kernel: tuner 0-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) Jan 10 08:27:32 localhost kernel: saa7133[0]: registered device video0 [v4l2] Jan 10 08:27:32 localhost kernel: saa7133[0]: registered device vbi0 Jan 10 08:27:32 localhost kernel: saa7133[0]: registered device radio0 Jan 10 08:27:32 localhost kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Jan 10 08:27:32 localhost kernel: Installing spdif_bug patch: Audigy 2 ZS [SB0353] Jan 10 08:27:32 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Jan 10 08:27:32 localhost kernel: Adding 497952k swap on /dev/hda5. Priority:-1 extents:1 across:497952k Jan 10 08:27:32 localhost kernel: EXT3 FS on hda2, internal journal Jan 10 08:27:32 localhost kernel: it87: Found IT8705F chip at 0x290, revision 3 Jan 10 08:27:32 localhost kernel: it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface Jan 10 08:27:32 localhost kernel: device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com Jan 10 08:27:32 localhost kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 Jan 10 08:27:32 localhost kernel: NET: Registered protocol family 10 Jan 10 08:27:32 localhost kernel: lo: Disabled Privacy Extensions Jan 10 08:27:33 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:652, dev=, pid=4335, e=2, t=1168435653 ptal-mlcd successfully initialized. Jan 10 08:27:33 localhost ptal-printd: ptal-printd(mlc:usb:psc_2400_series) successfully initialized using /var/run/ptal-printd/mlc_usb_psc_2400_series*. Jan 10 08:27:35 localhost ptal-photod: ptal-photod(mlc:usb:psc_2400_series) successfully initialized, listening on port 5703. Jan 10 08:27:36 localhost kernel: lp0: using parport0 (interrupt-driven). Jan 10 08:27:36 localhost kernel: ppdev: user-space parallel port driver --=-Hmvrz213OdcutZ4j6OWd-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/