From:   Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To:     broonie@kernel.org
Cc:     lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com,
        pierre-louis.bossart@linux.intel.com, alsa-devel@alsa-project.org,
        linux-kernel@vger.kernel.org,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH 2/5] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer
Date:   Tue, 16 Nov 2021 11:47:18 +0000
Message-Id: <20211116114721.12517-3-srinivas.kandagatla@linaro.org>
In-Reply-To: <20211116114721.12517-1-srinivas.kandagatla@linaro.org>
References: <20211116114721.12517-1-srinivas.kandagatla@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Stream IDs are reused across multiple BackEnd mixers, do not reset the
stream mixers if they are not already set for that particular FrontEnd.

Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1

would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below
command will reset previously setup MultiMedia1 stream, because both of them
are using MultiMedia1 PCM stream.

amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0

reset the FrontEnd Mixers conditionally to fix this issue.

This is more noticeable in desktop setup, where in alsactl tries to restore
the alsa state and overwriting the previous mixer settings.

Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/qdsp6/q6routing.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index 3390ebef9549..243b8179e59d 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -495,7 +495,11 @@ static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
 		session->port_id = be_id;
 		snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update);
 	} else {
-		session->port_id = -1;
+		if (session->port_id == be_id) {
+			session->port_id = -1;
+			return 0;
+		}
+
 		snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update);
 	}
 
-- 
2.21.0