Date:   Tue, 16 Nov 2021 14:54:06 +0200
From:   Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To:     Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
        Matti Vaittinen <mazziesaccount@gmail.com>
Cc:     lukas.bulwahn@gmail.com, Lee Jones <lee.jones@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <brgl@bgdev.pl>,
        Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-power@fi.rohmeurope.com
Subject: [PATCH RESEND 2/4] gpio: bd70528 Drop BD70528 support
Message-ID: <4eff6bd5eff8afc137dd8c1697cb5c6b2e3aacd2.1637066805.git.matti.vaittinen@fi.rohmeurope.com>
References: <cover.1637066805.git.matti.vaittinen@fi.rohmeurope.com>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha256;
        protocol="application/pgp-signature"; boundary="PslMCVhbT8d57ZYD"
Content-Disposition: inline
In-Reply-To: <cover.1637066805.git.matti.vaittinen@fi.rohmeurope.com>
Precedence: bulk


--PslMCVhbT8d57ZYD
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

The only known BD70528 use-cases are such that the PMIC is controlled
=66rom separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/gpio/Kconfig        |  11 --
 drivers/gpio/Makefile       |   1 -
 drivers/gpio/gpio-bd70528.c | 230 ------------------------------------
 3 files changed, 242 deletions(-)
 delete mode 100644 drivers/gpio/gpio-bd70528.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 072ed610f9c6..4c02ee52b701 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1132,17 +1132,6 @@ config GPIO_ARIZONA
 	help
 	  Support for GPIOs on Wolfson Arizona class devices.
=20
-config GPIO_BD70528
-	tristate "ROHM BD70528 GPIO support"
-	depends on MFD_ROHM_BD70528
-	help
-	  Support for GPIOs on ROHM BD70528 PMIC. There are four GPIOs
-	  available on the ROHM PMIC in total. The GPIOs can also
-	  generate interrupts.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called gpio-bd70528.
-
 config GPIO_BD71815
 	tristate "ROHM BD71815 PMIC GPIO support"
 	depends on MFD_ROHM_BD71828
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 71ee9fc2ff83..ed5f9b1a75ce 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_GPIO_ASPEED_SGPIO)		+=3D gpio-aspeed-sgpio.o
 obj-$(CONFIG_GPIO_ATH79)		+=3D gpio-ath79.o
 obj-$(CONFIG_GPIO_BCM_KONA)		+=3D gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BCM_XGS_IPROC)	+=3D gpio-xgs-iproc.o
-obj-$(CONFIG_GPIO_BD70528)		+=3D gpio-bd70528.o
 obj-$(CONFIG_GPIO_BD71815)		+=3D gpio-bd71815.o
 obj-$(CONFIG_GPIO_BD71828)		+=3D gpio-bd71828.o
 obj-$(CONFIG_GPIO_BD9571MWV)		+=3D gpio-bd9571mwv.o
diff --git a/drivers/gpio/gpio-bd70528.c b/drivers/gpio/gpio-bd70528.c
deleted file mode 100644
index 397a50d6bc65..000000000000
--- a/drivers/gpio/gpio-bd70528.c
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2018 ROHM Semiconductors
-// gpio-bd70528.c ROHM BD70528MWV gpio driver
-
-#include <linux/gpio/driver.h>
-#include <linux/mfd/rohm-bd70528.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-
-#define GPIO_IN_REG(offset) (BD70528_REG_GPIO1_IN + (offset) * 2)
-#define GPIO_OUT_REG(offset) (BD70528_REG_GPIO1_OUT + (offset) * 2)
-
-struct bd70528_gpio {
-	struct regmap *regmap;
-	struct device *dev;
-	struct gpio_chip gpio;
-};
-
-static int bd70528_set_debounce(struct bd70528_gpio *bdgpio,
-				unsigned int offset, unsigned int debounce)
-{
-	u8 val;
-
-	switch (debounce) {
-	case 0:
-		val =3D BD70528_DEBOUNCE_DISABLE;
-		break;
-	case 1 ... 15000:
-		val =3D BD70528_DEBOUNCE_15MS;
-		break;
-	case 15001 ... 30000:
-		val =3D BD70528_DEBOUNCE_30MS;
-		break;
-	case 30001 ... 50000:
-		val =3D BD70528_DEBOUNCE_50MS;
-		break;
-	default:
-		dev_err(bdgpio->dev,
-			"Invalid debounce value %u\n", debounce);
-		return -EINVAL;
-	}
-	return regmap_update_bits(bdgpio->regmap, GPIO_IN_REG(offset),
-				 BD70528_DEBOUNCE_MASK, val);
-}
-
-static int bd70528_get_direction(struct gpio_chip *chip, unsigned int offs=
et)
-{
-	struct bd70528_gpio *bdgpio =3D gpiochip_get_data(chip);
-	int val, ret;
-
-	/* Do we need to do something to IRQs here? */
-	ret =3D regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset), &val);
-	if (ret) {
-		dev_err(bdgpio->dev, "Could not read gpio direction\n");
-		return ret;
-	}
-	if (val & BD70528_GPIO_OUT_EN_MASK)
-		return GPIO_LINE_DIRECTION_OUT;
-
-	return GPIO_LINE_DIRECTION_IN;
-}
-
-static int bd70528_gpio_set_config(struct gpio_chip *chip, unsigned int of=
fset,
-				   unsigned long config)
-{
-	struct bd70528_gpio *bdgpio =3D gpiochip_get_data(chip);
-
-	switch (pinconf_to_config_param(config)) {
-	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-		return regmap_update_bits(bdgpio->regmap,
-					  GPIO_OUT_REG(offset),
-					  BD70528_GPIO_DRIVE_MASK,
-					  BD70528_GPIO_OPEN_DRAIN);
-		break;
-	case PIN_CONFIG_DRIVE_PUSH_PULL:
-		return regmap_update_bits(bdgpio->regmap,
-					  GPIO_OUT_REG(offset),
-					  BD70528_GPIO_DRIVE_MASK,
-					  BD70528_GPIO_PUSH_PULL);
-		break;
-	case PIN_CONFIG_INPUT_DEBOUNCE:
-		return bd70528_set_debounce(bdgpio, offset,
-					    pinconf_to_config_argument(config));
-		break;
-	default:
-		break;
-	}
-	return -ENOTSUPP;
-}
-
-static int bd70528_direction_input(struct gpio_chip *chip, unsigned int of=
fset)
-{
-	struct bd70528_gpio *bdgpio =3D gpiochip_get_data(chip);
-
-	/* Do we need to do something to IRQs here? */
-	return regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
-				 BD70528_GPIO_OUT_EN_MASK,
-				 BD70528_GPIO_OUT_DISABLE);
-}
-
-static void bd70528_gpio_set(struct gpio_chip *chip, unsigned int offset,
-			     int value)
-{
-	int ret;
-	struct bd70528_gpio *bdgpio =3D gpiochip_get_data(chip);
-	u8 val =3D (value) ? BD70528_GPIO_OUT_HI : BD70528_GPIO_OUT_LO;
-
-	ret =3D regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
-				 BD70528_GPIO_OUT_MASK, val);
-	if (ret)
-		dev_err(bdgpio->dev, "Could not set gpio to %d\n", value);
-}
-
-static int bd70528_direction_output(struct gpio_chip *chip, unsigned int o=
ffset,
-				    int value)
-{
-	struct bd70528_gpio *bdgpio =3D gpiochip_get_data(chip);
-
-	bd70528_gpio_set(chip, offset, value);
-	return regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset),
-				 BD70528_GPIO_OUT_EN_MASK,
-				 BD70528_GPIO_OUT_ENABLE);
-}
-
-#define GPIO_IN_STATE_MASK(offset) (BD70528_GPIO_IN_STATE_BASE << (offset))
-
-static int bd70528_gpio_get_o(struct bd70528_gpio *bdgpio, unsigned int of=
fset)
-{
-	int ret;
-	unsigned int val;
-
-	ret =3D regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset), &val);
-	if (!ret)
-		ret =3D !!(val & BD70528_GPIO_OUT_MASK);
-	else
-		dev_err(bdgpio->dev, "GPIO (out) state read failed\n");
-
-	return ret;
-}
-
-static int bd70528_gpio_get_i(struct bd70528_gpio *bdgpio, unsigned int of=
fset)
-{
-	unsigned int val;
-	int ret;
-
-	ret =3D regmap_read(bdgpio->regmap, BD70528_REG_GPIO_STATE, &val);
-
-	if (!ret)
-		ret =3D !(val & GPIO_IN_STATE_MASK(offset));
-	else
-		dev_err(bdgpio->dev, "GPIO (in) state read failed\n");
-
-	return ret;
-}
-
-static int bd70528_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
-	int ret;
-	struct bd70528_gpio *bdgpio =3D gpiochip_get_data(chip);
-
-	/*
-	 * There is a race condition where someone might be changing the
-	 * GPIO direction after we get it but before we read the value. But
-	 * application design where GPIO direction may be changed just when
-	 * we read GPIO value would be pointless as reader could not know
-	 * whether the returned high/low state is caused by input or output.
-	 * Or then there must be other ways to mitigate the issue. Thus
-	 * locking would make no sense.
-	 */
-	ret =3D bd70528_get_direction(chip, offset);
-	if (ret =3D=3D GPIO_LINE_DIRECTION_OUT)
-		ret =3D bd70528_gpio_get_o(bdgpio, offset);
-	else if (ret =3D=3D GPIO_LINE_DIRECTION_IN)
-		ret =3D bd70528_gpio_get_i(bdgpio, offset);
-	else
-		dev_err(bdgpio->dev, "failed to read GPIO direction\n");
-
-	return ret;
-}
-
-static int bd70528_probe(struct platform_device *pdev)
-{
-	struct device *dev =3D &pdev->dev;
-	struct bd70528_gpio *bdgpio;
-	int ret;
-
-	bdgpio =3D devm_kzalloc(dev, sizeof(*bdgpio), GFP_KERNEL);
-	if (!bdgpio)
-		return -ENOMEM;
-	bdgpio->dev =3D dev;
-	bdgpio->gpio.parent =3D dev->parent;
-	bdgpio->gpio.label =3D "bd70528-gpio";
-	bdgpio->gpio.owner =3D THIS_MODULE;
-	bdgpio->gpio.get_direction =3D bd70528_get_direction;
-	bdgpio->gpio.direction_input =3D bd70528_direction_input;
-	bdgpio->gpio.direction_output =3D bd70528_direction_output;
-	bdgpio->gpio.set_config =3D bd70528_gpio_set_config;
-	bdgpio->gpio.can_sleep =3D true;
-	bdgpio->gpio.get =3D bd70528_gpio_get;
-	bdgpio->gpio.set =3D bd70528_gpio_set;
-	bdgpio->gpio.ngpio =3D 4;
-	bdgpio->gpio.base =3D -1;
-#ifdef CONFIG_OF_GPIO
-	bdgpio->gpio.of_node =3D dev->parent->of_node;
-#endif
-	bdgpio->regmap =3D dev_get_regmap(dev->parent, NULL);
-	if (!bdgpio->regmap)
-		return -ENODEV;
-
-	ret =3D devm_gpiochip_add_data(dev, &bdgpio->gpio, bdgpio);
-	if (ret)
-		dev_err(dev, "gpio_init: Failed to add bd70528-gpio\n");
-
-	return ret;
-}
-
-static struct platform_driver bd70528_gpio =3D {
-	.driver =3D {
-		.name =3D "bd70528-gpio"
-	},
-	.probe =3D bd70528_probe,
-};
-
-module_platform_driver(bd70528_gpio);
-
-MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
-MODULE_DESCRIPTION("BD70528 voltage regulator driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:bd70528-gpio");
--=20
2.31.1


--=20
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =3D]=20

--PslMCVhbT8d57ZYD
Content-Type: application/pgp-signature; name="signature.asc"

-----BEGIN PGP SIGNATURE-----

iQEzBAEBCAAdFiEEIx+f8wZb28fLKEhTeFA3/03aocUFAmGTqe4ACgkQeFA3/03a
ocV/LAf8C+bfmAscBkSPmwX59y4jbpxxgmQp7wxnIb7bt7MKeQV62yuW8xpj94Nk
ld9p3aco7HWzefyam/MNJMyvEcUUWd+9IKnFNGJGpRrRxlxr7GUkO/34FbN7dHwq
Muod0X5m5indHdox37IRCExIp3ZnjNyJ7d3J1AdY2N8vc6qkKwVp2OJ2cnHty0yj
T+OQNzGfx/T+CNJmvJCub+KZBihUE3SALObfSR47t5lAz04zTGuZ1GDzPJ3Wx41h
XX4+cVsITnBE1gEk6La69VgXGH1UmLIDWSYM6mPnIqAFflTCOXsovg1igrhKuLmr
V0tL7j/hoI0hOIUtq31tXetCNt+jJQ==
=9byA
-----END PGP SIGNATURE-----

--PslMCVhbT8d57ZYD--