From:   Robert Foss <robert.foss@linaro.org>
To:     agross@kernel.org, bjorn.andersson@linaro.org,
        robert.foss@linaro.org, todor.too@gmail.com, mchehab@kernel.org,
        robh+dt@kernel.org, angelogioacchino.delregno@somainline.org,
        linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
        Andrey Konovalov <andrey.konovalov@linaro.org>
Subject: [PATCH v2 3/4] arm64: dts: qcom: msm8916: Remove clock-lanes property from &camss node
Date:   Wed, 17 Nov 2021 12:37:59 +0100
Message-Id: <20211117113800.260741-4-robert.foss@linaro.org>
In-Reply-To: <20211117113800.260741-1-robert.foss@linaro.org>
References: <20211117113800.260741-1-robert.foss@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index f8d8f3e3664e..faf86ce165a8 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -248,7 +248,6 @@ ports {
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
-				clock-lanes = <1>;
 				data-lanes = <0 2>;
 				remote-endpoint = <&ov5640_ep>;
 				status = "okay";
@@ -284,7 +283,6 @@ camera_rear@3b {
 
 		port {
 			ov5640_ep: endpoint {
-				clock-lanes = <1>;
 				data-lanes = <0 2>;
 				remote-endpoint = <&csiphy0_ep>;
 			};
-- 
2.32.0