Sender: pillair=codeaurora.org@mg.codeaurora.org
DMARC-Filter: OpenDMARC Filter v1.4.1 smtp.codeaurora.org 0D0C8C4338F
From:   Rakesh Pillai <pillair@codeaurora.org>
To:     agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org,
        swboyd@chromium.org
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, sibis@codeaurora.org,
        mpubbise@codeaurora.org, kuabhs@chromium.org,
        Rakesh Pillai <pillair@codeaurora.org>
Subject: [PATCH v7] arm64: dts: qcom: sc7280: Add WPSS remoteproc node
Date:   Fri, 19 Nov 2021 10:54:48 +0530
Message-Id: <1637299488-22336-1-git-send-email-pillair@codeaurora.org>
Precedence: bulk

Add the WPSS remoteproc node in dts for
PIL loading.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
Changes from v6:
- Swap the oder of two properties in wpss_mem reserved memory

Changes from v5:
- Update the clock names
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts |  4 +++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 56 +++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 9b991ba..ddab150 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -80,3 +80,7 @@
 		qcom,pre-scaling = <1 1>;
 	};
 };
+
+&remoteproc_wpss {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 365a2e0..dd93f13 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -134,6 +134,11 @@
 			no-map;
 		};
 
+		wpss_mem: memory@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
 		rmtfs_mem: memory@9c900000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x9c900000 0x0 0x280000>;
@@ -2598,6 +2603,57 @@
 			status = "disabled";
 		};
 
+		remoteproc_wpss: remoteproc@8a00000 {
+			compatible = "qcom,sc7280-wpss-pil";
+			reg = <0 0x08a00000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+				 <&gcc GCC_WPSS_AHB_CLK>,
+				 <&gcc GCC_WPSS_RSCP_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ahb_bdg", "ahb",
+				      "rscp", "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&wpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&wpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+			reset-names = "restart", "pdc_sync";
+
+			qcom,halt-regs = <&tcsr_mutex 0x37000>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_WPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "wpss";
+				qcom,remote-pid = <13>;
+			};
+		};
+
 		dc_noc: interconnect@90e0000 {
 			reg = <0 0x090e0000 0 0x5080>;
 			compatible = "qcom,sc7280-dc-noc";
-- 
2.7.4