Date:   Sun, 21 Nov 2021 14:31:02 +0000
From:   Jonathan Cameron <jic23@kernel.org>
To:     Paul Cercueil <paul@crapouillou.net>
Cc:     Alexandru Ardelean <ardeleanalex@gmail.com>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Michael Hennerich <Michael.Hennerich@analog.com>,
        Sumit Semwal <sumit.semwal@linaro.org>,
        Christian =?UTF-8?B?S8O2bmln?= <christian.koenig@amd.com>,
        linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-media@vger.kernel.org, dri-devel@lists.freedesktop.org,
        linaro-mm-sig@lists.linaro.org
Subject: Re: [PATCH 07/15] iio: core: Add new DMABUF interface
 infrastructure
Message-ID: <20211121143102.0ae208eb@jic23-huawei>
In-Reply-To: <20211115141925.60164-8-paul@crapouillou.net>
References: <20211115141925.60164-1-paul@crapouillou.net>
        <20211115141925.60164-8-paul@crapouillou.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Mon, 15 Nov 2021 14:19:17 +0000
Paul Cercueil <paul@crapouillou.net> wrote:

> Add the necessary infrastructure to the IIO core to support a new DMABUF
> based interface.
> 
> The advantage of this new DMABUF based interface vs. the read()
> interface, is that it avoids an extra copy of the data between the
> kernel and userspace. This is particularly userful for high-speed
> devices which produce several megabytes or even gigabytes of data per
> second.
> 
> The data in this new DMABUF interface is managed at the granularity of
> DMABUF objects. Reducing the granularity from byte level to block level
> is done to reduce the userspace-kernelspace synchronization overhead
> since performing syscalls for each byte at a few Mbps is just not
> feasible.
> 
> This of course leads to a slightly increased latency. For this reason an
> application can choose the size of the DMABUFs as well as how many it
> allocates. E.g. two DMABUFs would be a traditional double buffering
> scheme. But using a higher number might be necessary to avoid
> underflow/overflow situations in the presence of scheduling latencies.
> 
> As part of the interface, 2 new IOCTLs have been added:
> 
> IIO_BUFFER_DMABUF_ALLOC_IOCTL(struct iio_dmabuf_alloc_req *):
>  Each call will allocate a new DMABUF object. The return value (if not
>  a negative errno value as error) will be the file descriptor of the new
>  DMABUF.
> 
> IIO_BUFFER_DMABUF_ENQUEUE_IOCTL(struct iio_dmabuf *):
>  Place the DMABUF object into the queue pending for hardware process.
> 
> These two IOCTLs have to be performed on the IIO buffer's file
> descriptor (either opened from the corresponding /dev/iio:deviceX, or
> obtained using the IIO_BUFFER_GET_FD_IOCTL() ioctl).

Unrelated to this patch except tangentially.  Maybe we should enable
new buffer features only on the IIO_BUFFER_GET_FD_IOCTL() route as
we probably want to deprecate the old interfaces due to the it only
supporting a single buffer / datastream per device.

Possibly something for another day...

Nothing to add on actual code...

Jonathan

> 
> To access the data stored in a block by userspace the block must be
> mapped to the process's memory. This is done by calling mmap() on the
> DMABUF's file descriptor.
> 
> Before accessing the data through the map, you must use the
> DMA_BUF_IOCTL_SYNC(struct dma_buf_sync *) ioctl, with the
> DMA_BUF_SYNC_START flag, to make sure that the data is available.
> This call may block until the hardware is done with this block. Once
> you are done reading or writing the data, you must use this ioctl again
> with the DMA_BUF_SYNC_END flag, before enqueueing the DMABUF to the
> kernel's queue.
> 
> If you need to know when the hardware is done with a DMABUF, you can
> poll its file descriptor for the EPOLLOUT event.
> 
> Finally, to destroy a DMABUF object, simply call close() on its file
> descriptor.
> 
> A typical workflow for the new interface is:
> 
>   for block in blocks:
>     DMABUF_ALLOC block
>     mmap block
> 
>   enable buffer
> 
>   while !done
>     for block in blocks:
>       DMABUF_ENQUEUE block
> 
>       DMABUF_SYNC_START block
>       process data
>       DMABUF_SYNC_END block
> 
>   disable buffer
> 
>   for block in blocks:
>     close block
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  drivers/iio/industrialio-buffer.c | 44 +++++++++++++++++++++++++++++++
>  include/linux/iio/buffer_impl.h   |  8 ++++++
>  include/uapi/linux/iio/buffer.h   | 29 ++++++++++++++++++++
>  3 files changed, 81 insertions(+)
> 
> diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
> index e180728914c0..30910e6c2346 100644
> --- a/drivers/iio/industrialio-buffer.c
> +++ b/drivers/iio/industrialio-buffer.c
> @@ -17,6 +17,7 @@
>  #include <linux/fs.h>
>  #include <linux/cdev.h>
>  #include <linux/slab.h>
> +#include <linux/mm.h>
>  #include <linux/poll.h>
>  #include <linux/sched/signal.h>
>  
> @@ -1585,12 +1586,55 @@ static long iio_device_buffer_getfd(struct iio_dev *indio_dev, unsigned long arg
>  	return ret;
>  }
>  
> +static int iio_buffer_enqueue_dmabuf(struct iio_buffer *buffer,
> +				     struct iio_dmabuf __user *user_buf)
> +{
> +	struct iio_dmabuf dmabuf;
> +
> +	if (!buffer->access->enqueue_dmabuf)
> +		return -EPERM;
> +
> +	if (copy_from_user(&dmabuf, user_buf, sizeof(dmabuf)))
> +		return -EFAULT;
> +
> +	if (dmabuf.flags & ~IIO_BUFFER_DMABUF_SUPPORTED_FLAGS)
> +		return -EINVAL;
> +
> +	return buffer->access->enqueue_dmabuf(buffer, &dmabuf);
> +}
> +
> +static int iio_buffer_alloc_dmabuf(struct iio_buffer *buffer,
> +				   struct iio_dmabuf_alloc_req __user *user_req)
> +{
> +	struct iio_dmabuf_alloc_req req;
> +
> +	if (!buffer->access->alloc_dmabuf)
> +		return -EPERM;
> +
> +	if (copy_from_user(&req, user_req, sizeof(req)))
> +		return -EFAULT;
> +
> +	if (req.resv)
> +		return -EINVAL;
> +
> +	return buffer->access->alloc_dmabuf(buffer, &req);
> +}
> +
>  static long iio_device_buffer_ioctl(struct iio_dev *indio_dev, struct file *filp,
>  				    unsigned int cmd, unsigned long arg)
>  {
> +	struct iio_dev_buffer_pair *ib = filp->private_data;
> +	struct iio_buffer *buffer = ib->buffer;
> +	void __user *_arg = (void __user *)arg;
> +
>  	switch (cmd) {
>  	case IIO_BUFFER_GET_FD_IOCTL:
>  		return iio_device_buffer_getfd(indio_dev, arg);
> +	case IIO_BUFFER_DMABUF_ALLOC_IOCTL:
> +		return iio_buffer_alloc_dmabuf(buffer, _arg);
> +	case IIO_BUFFER_DMABUF_ENQUEUE_IOCTL:
> +		/* TODO: support non-blocking enqueue operation */
> +		return iio_buffer_enqueue_dmabuf(buffer, _arg);
>  	default:
>  		return IIO_IOCTL_UNHANDLED;
>  	}
> diff --git a/include/linux/iio/buffer_impl.h b/include/linux/iio/buffer_impl.h
> index e2ca8ea23e19..728541bc2c63 100644
> --- a/include/linux/iio/buffer_impl.h
> +++ b/include/linux/iio/buffer_impl.h
> @@ -39,6 +39,9 @@ struct iio_buffer;
>   *                      device stops sampling. Calles are balanced with @enable.
>   * @release:		called when the last reference to the buffer is dropped,
>   *			should free all resources allocated by the buffer.
> + * @alloc_dmabuf:	called from userspace via ioctl to allocate one DMABUF.
> + * @enqueue_dmabuf:	called from userspace via ioctl to queue this DMABUF
> + *			object to this buffer. Requires a valid DMABUF fd.
>   * @modes:		Supported operating modes by this buffer type
>   * @flags:		A bitmask combination of INDIO_BUFFER_FLAG_*
>   *
> @@ -68,6 +71,11 @@ struct iio_buffer_access_funcs {
>  
>  	void (*release)(struct iio_buffer *buffer);
>  
> +	int (*alloc_dmabuf)(struct iio_buffer *buffer,
> +			    struct iio_dmabuf_alloc_req *req);
> +	int (*enqueue_dmabuf)(struct iio_buffer *buffer,
> +			      struct iio_dmabuf *block);
> +
>  	unsigned int modes;
>  	unsigned int flags;
>  };
> diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h
> index 13939032b3f6..e4621b926262 100644
> --- a/include/uapi/linux/iio/buffer.h
> +++ b/include/uapi/linux/iio/buffer.h
> @@ -5,6 +5,35 @@
>  #ifndef _UAPI_IIO_BUFFER_H_
>  #define _UAPI_IIO_BUFFER_H_
>  
> +#include <linux/types.h>
> +
> +#define IIO_BUFFER_DMABUF_SUPPORTED_FLAGS	0x00000000
> +
> +/**
> + * struct iio_dmabuf_alloc_req - Descriptor for allocating IIO DMABUFs
> + * @size:	the size of a single DMABUF
> + * @resv:	reserved
> + */
> +struct iio_dmabuf_alloc_req {
> +	__u64 size;
> +	__u64 resv;
> +};
> +
> +/**
> + * struct iio_dmabuf - Descriptor for a single IIO DMABUF object
> + * @fd:		file descriptor of the DMABUF object
> + * @flags:	one or more IIO_BUFFER_DMABUF_* flags
> + * @bytes_used:	number of bytes used in this DMABUF for the data transfer.
> + *		If zero, the full buffer is used.
> + */
> +struct iio_dmabuf {
> +	__u32 fd;
> +	__u32 flags;
> +	__u64 bytes_used;
> +};
> +
>  #define IIO_BUFFER_GET_FD_IOCTL			_IOWR('i', 0x91, int)
> +#define IIO_BUFFER_DMABUF_ALLOC_IOCTL		_IOW('i', 0x92, struct iio_dmabuf_alloc_req)
> +#define IIO_BUFFER_DMABUF_ENQUEUE_IOCTL		_IOW('i', 0x93, struct iio_dmabuf)
>  
>  #endif /* _UAPI_IIO_BUFFER_H_ */