Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 18290C433F5 for ; Mon, 22 Nov 2021 10:37:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239148AbhKVKkI (ORCPT ); Mon, 22 Nov 2021 05:40:08 -0500 Received: from twspam01.aspeedtech.com ([211.20.114.71]:30881 "EHLO twspam01.aspeedtech.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235098AbhKVKkC (ORCPT ); Mon, 22 Nov 2021 05:40:02 -0500 Received: from mail.aspeedtech.com ([192.168.0.24]) by twspam01.aspeedtech.com with ESMTP id 1AMACN1m020908; Mon, 22 Nov 2021 18:12:23 +0800 (GMT-8) (envelope-from kuohsiang_chou@aspeedtech.com) Received: from localhost.localdomain.com (192.168.2.143) by TWMBX02.aspeed.com (192.168.0.24) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Mon, 22 Nov 2021 18:36:23 +0800 From: KuoHsiang Chou To: , , CC: , , , , , , , , , Subject: [PATCH] drm/ast: Create the driver for ASPEED proprietory Display-Port Date: Mon, 22 Nov 2021 18:36:17 +0800 Message-ID: <20211122103617.3496-1-kuohsiang_chou@aspeedtech.com> X-Mailer: git-send-email 2.27.0 MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Content-Type: text/plain; charset=US-ASCII X-Originating-IP: [192.168.2.143] X-ClientProxiedBy: TWMBX02.aspeed.com (192.168.0.24) To TWMBX02.aspeed.com (192.168.0.24) X-DNSRBL: X-MAIL: twspam01.aspeedtech.com 1AMACN1m020908 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 1. The MCU FW controling ASPEED DP is loaded by BMC boot loader. 2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP, and CRD1[5] has been asserted by BMVC boot loader. 3. EDID is prioritized by DP monitor. 4. DP's EDID has high priority to decide resolution supporting. Signed-off-by: KuoHsiang Chou --- drivers/gpu/drm/ast/Makefile | 2 +- drivers/gpu/drm/ast/ast_dp.c | 286 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/ast/ast_drv.h | 13 ++ drivers/gpu/drm/ast/ast_main.c | 7 +- drivers/gpu/drm/ast/ast_mode.c | 50 +++++- drivers/gpu/drm/ast/ast_post.c | 4 +- 6 files changed, 353 insertions(+), 9 deletions(-) create mode 100644 drivers/gpu/drm/ast/ast_dp.c diff --git a/drivers/gpu/drm/ast/Makefile b/drivers/gpu/drm/ast/Makefile index 438a2d05b..9bd0756e0 100644 --- a/drivers/gpu/drm/ast/Makefile +++ b/drivers/gpu/drm/ast/Makefile @@ -3,6 +3,6 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -ast-y := ast_drv.o ast_main.o ast_mm.o ast_mode.o ast_post.o ast_dp501.o +ast-y := ast_drv.o ast_main.o ast_mm.o ast_mode.o ast_post.o ast_dp501.o ast_dp.o obj-$(CONFIG_DRM_AST) := ast.o diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c new file mode 100644 index 000000000..537eaf4fa --- /dev/null +++ b/drivers/gpu/drm/ast/ast_dp.c @@ -0,0 +1,286 @@ +/* + * Copyright 2012 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + */ +/* + * Authors: KuoHsiang Chou + */ + +#include +#include +#include +#include "ast_drv.h" + +bool ast_dp_read_edid(struct drm_device *dev, u8 *ediddata) +{ + struct ast_private *ast = to_ast_private(dev); + u8 i = 0, j = 0; + +#ifdef DPControlPower + u8 bDPState_Change = false; + + // Check DP power off or not. + if (ast->ASTDP_State & 0x10) { + // DP power on + ast_dp_PowerOnOff(dev, 1); + bDPState_Change = true; + } +#endif + + /* + * CRD1[b5]: DP MCU FW is executing + * CRDC[b0]: DP link success + * CRDF[b0]: DP HPD + * CRE5[b0]: Host reading EDID process is done + */ + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x20) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, 0x01) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x01) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x01))) { +#ifdef DPControlPower + // Set back power off + if (bDPState_Change) + ast_dp_PowerOnOff(dev, 0); +#endif + return false; + } + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x00); + + for (i = 0; i < 32; i++) { + /* + * CRE4[7:0]: Read-Pointer for EDID (Unit: 4bytes); valid range: 0~64 + */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE4, 0x00, (u8) i); + j = 0; + + /* + * CRD7[b0]: valid flag for EDID + * CRD6[b0]: mirror read pointer for EDID + */ + while ((ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD7, 0x01) != 0x01) || + (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD6, 0xFF) != i)) { + mdelay(j+1); + + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x20) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, 0x01) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x01))) { + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x01); + return false; + } + + j++; + if (j > 200) { + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x01); + return false; + } + } + + *(ediddata) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD8, 0xFF); + *(ediddata + 1) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD9, 0xFF); + *(ediddata + 2) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDA, 0xFF); + *(ediddata + 3) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDB, 0xFF); + + if (i == 31) { + *(ediddata + 3) = *(ediddata + 3) + *(ediddata + 2); + *(ediddata + 2) = 0; + } + + ediddata += 4; + } + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, 0x00, 0x01); + +#ifdef DPControlPower + // Set back power off + if (bDPState_Change) + ast_dp_PowerOnOff(dev, 0); +#endif + + return true; +} + +/* + * Launch Aspeed DP + */ +bool ast_dp_launch(struct drm_device *dev, u8 bPower) +{ + u32 i = 0, j = 0, WaitCount = 1; + u8 bDPTX = 0; + u8 bDPExecute = 1; + + struct ast_private *ast = to_ast_private(dev); + // S3 come back, need more time to wait BMC ready. + if (bPower) + WaitCount = 300; + + // Fill + ast->tx_chip_type = AST_TX_NONE; + + // Wait total count by different condition. + // This is a temp solution for DP check + for (j = 0; j < WaitCount; j++) { + bDPTX = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x0E); + + if (bDPTX) + break; + + msleep(100); + } + + // 0xE : ASTDP with DPMCU FW handling + if (bDPTX == 0x0E) { + // Wait one second then timeout. + i = 0; + + while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, 0x20) != 0x20) { + i++; + // wait 100 ms + msleep(100); + + if (i >= 10) { + // DP would not be ready. + bDPExecute = 0; + break; + } + }; + + if (bDPExecute) + ast->tx_chip_type = AST_TX_ASTDP; + } + + return true; +} + +#ifdef DPControlPower + +void ast_dp_PowerOnOff(struct drm_device *dev, u8 Mode) +{ + struct ast_private *ast = to_ast_private(dev); + // Read and Turn off DP PHY sleep + u8 bE3 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, 0x0F); + + // Turn on DP PHY sleep + if (!Mode) + bE3 |= 0x10; + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, 0x00, bE3); // DP Power on/off + + // Save ASTDP power state + ast->ASTDP_State = bE3; +} + +#endif + +void ast_dp_SetOnOff(struct drm_device *dev, u8 Mode) +{ + struct ast_private *ast = to_ast_private(dev); + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, 0x00, Mode); // video on/off + + // Save ASTDP power state + ast->ASTDP_State = Mode; + + // If DP plug in and link successful then check video on / off status + if (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, 0x01) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x01)) { + Mode <<= 4; + while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, 0x10) != Mode) { + // wait 1 ms + mdelay(1); + } + } +} + +void ast_dp_SetOutput(struct drm_crtc *crtc, struct ast_vbios_mode_info *vbios_mode) +{ + struct ast_private *ast = to_ast_private(crtc->dev); + + u32 ulRefreshRateIndex; + u8 ModeIdx; + + ulRefreshRateIndex = vbios_mode->enh_table->refresh_rate_index - 1; + + switch (crtc->mode.crtc_hdisplay) { + case 320: + ModeIdx = 0x11; + break; + case 400: + ModeIdx = 0x12; + break; + case 512: + ModeIdx = 0x13; + break; + case 640: + ModeIdx = (0x00 + (u8) ulRefreshRateIndex); + break; + case 800: + ModeIdx = (0x04 + (u8) ulRefreshRateIndex); + break; + case 1024: + ModeIdx = (0x09 + (u8) ulRefreshRateIndex); + break; + case 1152: + ModeIdx = 0x1F; + break; + case 1280: + if (crtc->mode.crtc_vdisplay == 800) + ModeIdx = (0x17 - (u8) ulRefreshRateIndex); // For RB/Non-RB + else // 1024 + ModeIdx = (0x0D + (u8) ulRefreshRateIndex); + break; + case 1360: + case 1366: + ModeIdx = 0x1E; + break; + case 1440: + ModeIdx = (0x19 - (u8) ulRefreshRateIndex); // For RB/Non-RB + break; + case 1600: + if (crtc->mode.crtc_vdisplay == 900) + ModeIdx = (0x1D - (u8) ulRefreshRateIndex); // For RB/Non-RB + else //1200 + ModeIdx = 0x10; + break; + case 1680: + ModeIdx = (0x1B - (u8) ulRefreshRateIndex); // For RB/Non-RB + break; + case 1920: + if (crtc->mode.crtc_vdisplay == 1080) + ModeIdx = 0x15; + else //1200 + ModeIdx = 0x14; + break; + default: + return; + } + + /* + * CRE0[7:0]: MISC0 ((0x00: 18-bpp) or (0x20: 24-bpp) + * CRE1[7:0]: MISC1 (default: 0x00) + * CRE2[7:0]: video format index (0x00 ~ 0x20 or 0x40 ~ 0x50) + */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE0, 0x00, 0x20); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE1, 0x00, 0x00); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE2, 0x00, ModeIdx); +} diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h index 2cfce7dc9..e56d5d57b 100644 --- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -71,6 +71,7 @@ enum ast_tx_chip { AST_TX_SIL164, AST_TX_ITE66121, AST_TX_DP501, + AST_TX_ASTDP, }; #define AST_DRAM_512Mx16 0 @@ -175,6 +176,9 @@ struct ast_private { u8 dp501_maxclk; u8 *dp501_fw_addr; const struct firmware *dp501_fw; /* dp501 fw */ + + // ASTDP + u8 ASTDP_State; }; static inline struct ast_private *to_ast_private(struct drm_device *dev) @@ -356,5 +360,14 @@ bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata); u8 ast_get_dp501_max_clk(struct drm_device *dev); void ast_init_3rdtx(struct drm_device *dev); +/* aspeed DP */ +#define DPControlPower +bool ast_dp_read_edid(struct drm_device *dev, u8 *ediddata); +bool ast_dp_launch(struct drm_device *dev, u8 bPower); +#ifdef DPControlPower +void ast_dp_PowerOnOff(struct drm_device *dev, u8 Mode); +#endif +void ast_dp_SetOnOff(struct drm_device *dev, u8 Mode); +void ast_dp_SetOutput(struct drm_crtc *crtc, struct ast_vbios_mode_info *vbios_mode); #endif diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c index 79a361867..de5d69888 100644 --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -212,7 +212,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post) } break; } - + ast->support_wide_screen = true; /* Check 3rd Tx option (digital output afaik) */ ast->tx_chip_type = AST_TX_NONE; @@ -230,7 +230,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post) ast->tx_chip_type = AST_TX_SIL164; } - if ((ast->chip == AST2300) || (ast->chip == AST2400)) { + if ((ast->chip == AST2300) || (ast->chip == AST2400) || (ast->chip == AST2500)) { /* * On AST2300 and 2400, look the configuration set by the SoC in * the SOC scratch register #1 bits 11:8 (interestingly marked @@ -254,7 +254,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post) case 0x0c: ast->tx_chip_type = AST_TX_DP501; } - } + } else if (ast->chip == AST2600) + ast_dp_launch(&ast->base, 0); /* Print stuff for diagnostic purposes */ switch(ast->tx_chip_type) { diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 6bfaefa01..d7347d510 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -987,20 +987,44 @@ static int ast_cursor_plane_init(struct ast_private *ast) static void ast_crtc_dpms(struct drm_crtc *crtc, int mode) { struct ast_private *ast = to_ast_private(crtc->dev); + u8 ch = 0x03; /* TODO: Maybe control display signal generation with * Sync Enable (bit CR17.7). */ switch (mode) { case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: + ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x01, 0xdf, 0); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xfc, 0); if (ast->tx_chip_type == AST_TX_DP501) ast_set_dp501_video_output(crtc->dev, 1); + + if (ast->tx_chip_type == AST_TX_ASTDP) { +#ifdef DPControlPower + ast_dp_PowerOnOff(crtc->dev, 1); +#endif + ast_wait_for_vretrace(ast); + ast_dp_SetOnOff(crtc->dev, 1); + } + + ast_crtc_load_lut(ast, crtc); break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: + ch = mode; if (ast->tx_chip_type == AST_TX_DP501) ast_set_dp501_video_output(crtc->dev, 0); + + if (ast->tx_chip_type == AST_TX_ASTDP) { + ast_dp_SetOnOff(crtc->dev, 0); +#ifdef DPControlPower + ast_dp_PowerOnOff(crtc->dev, 0); +#endif + } + + ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x01, 0xdf, 0x20); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xfc, ch); break; } } @@ -1044,6 +1068,8 @@ ast_crtc_helper_atomic_flush(struct drm_crtc *crtc, struct ast_private *ast = to_ast_private(crtc->dev); struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc_state); struct ast_crtc_state *old_ast_crtc_state = to_ast_crtc_state(old_crtc_state); +struct ast_vbios_mode_info *vbios_mode_info = + &ast_crtc_state->vbios_mode_info; /* * The gamma LUT has to be reloaded after changing the primary @@ -1051,6 +1077,10 @@ ast_crtc_helper_atomic_flush(struct drm_crtc *crtc, */ if (old_ast_crtc_state->format != ast_crtc_state->format) ast_crtc_load_lut(ast, crtc); + + //Set Aspeed Display-Port + if (ast->tx_chip_type == AST_TX_ASTDP) + ast_dp_SetOutput(crtc, vbios_mode_info); } static void @@ -1225,7 +1255,16 @@ static int ast_get_modes(struct drm_connector *connector) ast->dp501_maxclk = ast_get_dp501_max_clk(connector->dev); else kfree(edid); + } else if (ast->tx_chip_type == AST_TX_ASTDP) { + edid = kmalloc(128, GFP_KERNEL); + if (!edid) + return -ENOMEM; + + flags = ast_dp_read_edid(connector->dev, (u8 *)edid); + if (!flags) + kfree(edid); } + if (!flags) edid = drm_get_edid(connector, &ast_connector->i2c->adapter); if (edid) { @@ -1256,10 +1295,12 @@ static enum drm_mode_status ast_mode_valid(struct drm_connector *connector, return MODE_OK; if ((mode->hdisplay == 1600) && (mode->vdisplay == 900)) return MODE_OK; + if ((mode->hdisplay == 1152) && (mode->vdisplay == 864)) + return MODE_OK; if ((ast->chip == AST2100) || (ast->chip == AST2200) || (ast->chip == AST2300) || (ast->chip == AST2400) || - (ast->chip == AST2500)) { + (ast->chip == AST2500) || (ast->chip == AST2600)) { if ((mode->hdisplay == 1920) && (mode->vdisplay == 1080)) return MODE_OK; @@ -1400,7 +1441,8 @@ int ast_mode_config_init(struct ast_private *ast) ast->chip == AST2200 || ast->chip == AST2300 || ast->chip == AST2400 || - ast->chip == AST2500) { + ast->chip == AST2500 || + ast->chip == AST2600) { dev->mode_config.max_width = 1920; dev->mode_config.max_height = 2048; } else { diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c index b5d92f652..0aa9cf0fb 100644 --- a/drivers/gpu/drm/ast/ast_post.c +++ b/drivers/gpu/drm/ast/ast_post.c @@ -379,7 +379,9 @@ void ast_post_gpu(struct drm_device *dev) ast_enable_mmio(dev); ast_set_def_ext_reg(dev); - if (ast->config_mode == ast_use_p2a) { + if (ast->chip == AST2600) { + ast_dp_launch(dev, 1); + } else if (ast->config_mode == ast_use_p2a) { if (ast->chip == AST2500) ast_post_chip_2500(dev); else if (ast->chip == AST2300 || ast->chip == AST2400) -- 2.27.0