Subject: Re: [PATCH RFC 0/2] CAN TRANSCEIVER: Add support for setting mux
CC:     Vignesh Raghavendra <vigneshr@ti.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Nishanth Menon <nm@ti.com>,
        Wolfgang Grandegger <wg@grandegger.com>,
        Marc Kleine-Budde <mkl@pengutronix.de>,
        Vinod Koul <vkoul@kernel.org>,
        Rob Herring <robh+dt@kernel.org>, <linux-can@vger.kernel.org>,
        <linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
References: <20211111164313.649-1-a-govindraju@ti.com>
From:   Aswath Govindraju <a-govindraju@ti.com>
Message-ID: <cf9c9534-92a8-4c7f-fdb6-43b40768ec65@ti.com>
Date:   Mon, 22 Nov 2021 18:34:08 +0530
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.14.0
MIME-Version: 1.0
In-Reply-To: <20211111164313.649-1-a-govindraju@ti.com>
Content-Type: text/plain; charset="utf-8"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

Hi all,

On 11/11/21 10:13 pm, Aswath Govindraju wrote:
> On some boards, for routing CAN signals from controller to transceiver,
> muxes might need to be set. Therefore, add support for setting the mux by
> reading the mux-controls property from the device tree node.
> 
> Aswath Govindraju (2):
>   dt-bindings: phy: ti,tcan104x-can: Document mux-controls property
>   phy: phy-can-transceiver: Add support for setting mux
> 

Thank you for the comments. I have posted a v2 for this series after
making the changes that were requested.

Link to v2,
- https://patchwork.kernel.org/project/linux-phy/list/?series=583917

Thanks,
Aswath

>  .../bindings/phy/ti,tcan104x-can.yaml         |  6 ++++++
>  drivers/phy/phy-can-transceiver.c             | 21 +++++++++++++++++++
>  2 files changed, 27 insertions(+)
>