Date:   Mon, 22 Nov 2021 14:12:21 +0100
From:   Marc Kleine-Budde <mkl@pengutronix.de>
To:     Aswath Govindraju <a-govindraju@ti.com>
Cc:     Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Peter Rosin <peda@axentia.se>,
        Rob Herring <robh+dt@kernel.org>,
        Wolfgang Grandegger <wg@grandegger.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Vinod Koul <vkoul@kernel.org>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-can@vger.kernel.org,
        linux-phy@lists.infradead.org
Subject: Re: [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for
 setting mux
Message-ID: <20211122131221.i3djuarw2ae5lbdk@pengutronix.de>
References: <20211122125624.6431-1-a-govindraju@ti.com>
 <20211122125624.6431-5-a-govindraju@ti.com>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha512;
        protocol="application/pgp-signature"; boundary="gvhvfddsmx63z7gf"
Content-Disposition: inline
In-Reply-To: <20211122125624.6431-5-a-govindraju@ti.com>
Precedence: bulk


--gvhvfddsmx63z7gf
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On 22.11.2021 18:26:24, Aswath Govindraju wrote:
> On some boards, for routing CAN signals from controller to transceiver,
> muxes might need to be set. Therefore, add support for setting the mux by
> reading the mux-controls property from the device tree node.
>=20
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
>  drivers/phy/phy-can-transceiver.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>=20
> diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-tran=
sceiver.c
> index 6f3fe37dee0e..15056b9d68ba 100644
> --- a/drivers/phy/phy-can-transceiver.c
> +++ b/drivers/phy/phy-can-transceiver.c
> @@ -10,6 +10,7 @@
>  #include<linux/module.h>
>  #include<linux/gpio.h>
>  #include<linux/gpio/consumer.h>
> +#include <linux/mux/consumer.h>
> =20
>  struct can_transceiver_data {
>  	u32 flags;
> @@ -21,13 +22,23 @@ struct can_transceiver_phy {
>  	struct phy *generic_phy;
>  	struct gpio_desc *standby_gpio;
>  	struct gpio_desc *enable_gpio;
> +	struct mux_control *mux_ctrl;
>  };
> =20
>  /* Power on function */
>  static int can_transceiver_phy_power_on(struct phy *phy)
>  {
> +	int ret;
>  	struct can_transceiver_phy *can_transceiver_phy =3D phy_get_drvdata(phy=
);
> =20
> +	if (can_transceiver_phy->mux_ctrl) {
> +		ret =3D mux_control_select(can_transceiver_phy->mux_ctrl,
> +					 mux_control_enable_state(can_transceiver_phy->mux_ctrl));
> +		if (ret) {
> +			dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
> +			return ret;
> +		}
> +	}
>  	if (can_transceiver_phy->standby_gpio)
>  		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
>  	if (can_transceiver_phy->enable_gpio)
> @@ -45,6 +56,8 @@ static int can_transceiver_phy_power_off(struct phy *ph=
y)
>  		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
>  	if (can_transceiver_phy->enable_gpio)
>  		gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
> +	if (can_transceiver_phy->mux_ctrl)
> +		mux_control_deselect(can_transceiver_phy->mux_ctrl);
> =20
>  	return 0;
>  }
> @@ -95,6 +108,19 @@ static int can_transceiver_phy_probe(struct platform_=
device *pdev)
>  	match =3D of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
>  	drvdata =3D match->data;
> =20
> +	if (of_property_read_bool(dev->of_node, "mux-controls")) {
> +		struct mux_control *control;
> +		int ret;
> +
> +		control =3D devm_mux_control_get(dev, NULL);
> +		if (IS_ERR(control)) {
> +			ret =3D PTR_ERR(control);
> +			dev_err_probe(&pdev->dev, ret, "failed to get mux\n");
> +			return PTR_ERR(control);
> +		}
> +		can_transceiver_phy->mux_ctrl =3D control;
> +	}

What about adding a devm_mux_control_get_optional(), which doesn't
return a -ENODEV but a NULL pointer if the device doesn't exist?

Marc

--=20
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

--gvhvfddsmx63z7gf
Content-Type: application/pgp-signature; name="signature.asc"

-----BEGIN PGP SIGNATURE-----

iQEzBAABCgAdFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmGblzMACgkQqclaivrt
76n5jQf/bvjlyjVTxnqe4ORD1NDhaoVzWDGHqD+iyEWl4PyU8w8PINWY7af2oqxO
XwnfYZxryhwTT1cxdr27EcnnhVU24G4bKu/pm8Bz9EQTTG9CuTR/Eg+PgApzWtYX
dFQkqq6tLiUgAHsc7QFqGNVNoFxOcE2KCUOFS1jdn3gT07FrvN4M+qTVJQOpAi9c
SYJ6F8DT3duS45KjWaQuEG6YnCNQTYA2PA2r0Y6/IHqqMvWcApQf+IcdMhztJ7B7
5rJqAiPKq0OZAN4P2146WYodjO5b1c5aeH1lbjud2Kp3VPCptGX5trm9jEnZhstb
dLP7NjeZqyixrl63w5bp+7AHqX9SPw==
=IqZw
-----END PGP SIGNATURE-----

--gvhvfddsmx63z7gf--