Subject: Re: [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for
 setting mux
To:     Aswath Govindraju <a-govindraju@ti.com>
CC:     Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Peter Rosin <peda@axentia.se>,
        Rob Herring <robh+dt@kernel.org>,
        Wolfgang Grandegger <wg@grandegger.com>,
        Marc Kleine-Budde <mkl@pengutronix.de>,
        Vinod Koul <vkoul@kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-can@vger.kernel.org>,
        <linux-phy@lists.infradead.org>
References: <20211122125624.6431-1-a-govindraju@ti.com>
 <20211122125624.6431-5-a-govindraju@ti.com>
From:   Kishon Vijay Abraham I <kishon@ti.com>
Message-ID: <cc28796e-2ebc-4aad-ffc2-4fe570b269db@ti.com>
Date:   Mon, 22 Nov 2021 19:14:36 +0530
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.11.0
MIME-Version: 1.0
In-Reply-To: <20211122125624.6431-5-a-govindraju@ti.com>
Content-Type: text/plain; charset="utf-8"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi Aswath,

On 22/11/21 6:26 pm, Aswath Govindraju wrote:
> On some boards, for routing CAN signals from controller to transceiver,
> muxes might need to be set. Therefore, add support for setting the mux by
> reading the mux-controls property from the device tree node.
> 
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
>  drivers/phy/phy-can-transceiver.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
> index 6f3fe37dee0e..15056b9d68ba 100644
> --- a/drivers/phy/phy-can-transceiver.c
> +++ b/drivers/phy/phy-can-transceiver.c
> @@ -10,6 +10,7 @@
>  #include<linux/module.h>
>  #include<linux/gpio.h>
>  #include<linux/gpio/consumer.h>
> +#include <linux/mux/consumer.h>
>  
>  struct can_transceiver_data {
>  	u32 flags;
> @@ -21,13 +22,23 @@ struct can_transceiver_phy {
>  	struct phy *generic_phy;
>  	struct gpio_desc *standby_gpio;
>  	struct gpio_desc *enable_gpio;
> +	struct mux_control *mux_ctrl;
>  };
>  
>  /* Power on function */
>  static int can_transceiver_phy_power_on(struct phy *phy)
>  {
> +	int ret;
>  	struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
>  
> +	if (can_transceiver_phy->mux_ctrl) {
> +		ret = mux_control_select(can_transceiver_phy->mux_ctrl,
> +					 mux_control_enable_state(can_transceiver_phy->mux_ctrl));

Would need 'select MULTIPLEXER' in Kconfig.

Thanks,
Kishon
> +		if (ret) {
> +			dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
> +			return ret;
> +		}
> +	}
>  	if (can_transceiver_phy->standby_gpio)
>  		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
>  	if (can_transceiver_phy->enable_gpio)
> @@ -45,6 +56,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
>  		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
>  	if (can_transceiver_phy->enable_gpio)
>  		gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
> +	if (can_transceiver_phy->mux_ctrl)
> +		mux_control_deselect(can_transceiver_phy->mux_ctrl);
>  
>  	return 0;
>  }
> @@ -95,6 +108,19 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
>  	match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
>  	drvdata = match->data;
>  
> +	if (of_property_read_bool(dev->of_node, "mux-controls")) {
> +		struct mux_control *control;
> +		int ret;
> +
> +		control = devm_mux_control_get(dev, NULL);
> +		if (IS_ERR(control)) {
> +			ret = PTR_ERR(control);
> +			dev_err_probe(&pdev->dev, ret, "failed to get mux\n");
> +			return PTR_ERR(control);
> +		}
> +		can_transceiver_phy->mux_ctrl = control;
> +	}
> +
>  	phy = devm_phy_create(dev, dev->of_node,
>  			      &can_transceiver_phy_ops);
>  	if (IS_ERR(phy)) {
>