From:   Roger Quadros <rogerq@kernel.org>
To:     nm@ti.com
Cc:     kishon@ti.com, vigneshr@ti.com,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Roger Quadros <rogerq@kernel.org>
Subject: [PATCH 2/2] arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node
Date:   Tue, 23 Nov 2021 12:39:08 +0200
Message-Id: <20211123103908.14220-3-rogerq@kernel.org>
In-Reply-To: <20211123103908.14220-1-rogerq@kernel.org>
References: <20211123103908.14220-1-rogerq@kernel.org>
Precedence: bulk

The ELM module is used for GPMC NAND accesses for detecting
and correcting errors during reads due to NAND bitflips errors.

4-, 8-, and 16-bit error-correction levels are supported using
the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 7fdd1789568a..340e6b2274c3 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1272,4 +1272,13 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	elm0: ecc@25010000 {
+		compatible = "ti,am3352-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+	};
 };
-- 
2.17.1