Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751288AbXANWoP (ORCPT ); Sun, 14 Jan 2007 17:44:15 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751299AbXANWoP (ORCPT ); Sun, 14 Jan 2007 17:44:15 -0500 Received: from mail.gmx.net ([213.165.64.20]:45458 "HELO mail.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751288AbXANWoN (ORCPT ); Sun, 14 Jan 2007 17:44:13 -0500 X-Authenticated: #5039886 Date: Sun, 14 Jan 2007 23:44:09 +0100 From: =?iso-8859-1?Q?Bj=F6rn?= Steinbrink To: jeff@garzik.org Cc: linux-kernel@vger.kernel.org, htejun@gmail.com Subject: SATA exceptions with 2.6.20-rc5 Message-ID: <20070114224409.GA17199@atjola.homenet> Mail-Followup-To: =?iso-8859-1?Q?Bj=F6rn?= Steinbrink , jeff@garzik.org, linux-kernel@vger.kernel.org, htejun@gmail.com MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.5.13 (2006-08-11) X-Y-GMX-Trusted: 0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29971 Lines: 630 Hi, with 2.6.20-rc{2,4,5} (no other tested yet) I see SATA exceptions quite often, with 2.6.19 there are no such exceptions. dmesg and lspci -v output follows. In the meantime, I'll start bisecting. Thanks Bj?rn Linux version 2.6.20-rc2 (doener@atjola) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 SMP Sun Dec 31 12:54:22 CET 2006 Command line: root=/dev/md0 ro quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524000) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7a70 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007fee9540 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x000000007fee9780 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee9480 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524000) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524000 On node 0 totalpages: 523903 DMA zone: 56 pages used for memmap DMA zone: 1122 pages reserved DMA zone: 2821 pages, LIFO batch:0 DMA32 zone: 7108 pages used for memmap DMA32 zone: 512796 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) PERCPU: Allocating 32000 bytes of per cpu data Built 1 zonelists. Total pages: 515617 Kernel command line: root=/dev/md0 ro quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ 5a74000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 2059000k/2096000k available (2795k kernel code, 36392k reserved, 1089k data, 224k init) Calibrating delay using timer specific routine.. 4422.42 BogoMIPS (lpj=22112114) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12558084 Detected 12.558 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4420.44 BogoMIPS (lpj=22102213) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 89 cycles, maxerr 393 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2210.219 MHz processor. migration_cost=327 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:05:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 5 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs *3 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 5 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LPCA] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:09.0 IO window: c000-cfff MEM window: fc000000-fdffffff PREFETCH window: fea00000-feafffff PCI: Bridge: 0000:00:0b.0 IO window: b000-bfff MEM window: fe900000-fe9fffff PREFETCH window: fe800000-fe8fffff PCI: Bridge: 0000:00:0c.0 IO window: a000-afff MEM window: fe700000-fe7fffff PREFETCH window: fe600000-fe6fffff PCI: Bridge: 0000:00:0d.0 IO window: 9000-9fff MEM window: fe500000-fe5fffff PREFETCH window: fe400000-fe4fffff PCI: Bridge: 0000:00:0e.0 IO window: 8000-8fff MEM window: f4000000-fbffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered io scheduler noop registered io scheduler deadline registered (default) 0000:00:02.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0b.0. PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0c.0. PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0d.0. PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0e.0. PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled tg3.c:v3.71 (December 15, 2006) ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:e0:81:55:09:b0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive hdb: AOPEN CD-RW CRW4852 1.00 20030123, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) sata_nv 0000:00:07.0: version 3.2 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0xFFFFC20000004480 ctl 0xFFFFC200000044A0 bmdma 0xD400 irq 23 ata2: SATA max UDMA/133 cmd 0xFFFFC20000004580 ctl 0xFFFFC200000045A0 bmdma 0xD408 irq 23 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 160086528 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 160086528 sectors: LBA ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5 ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5 ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: Attached scsi disk sdb usbmon: debugfs is not available ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 21, io mem 0xfebff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 2 usb 1-5: configuration #1 chosen from 1 choice usb 2-6: new full speed USB device using ohci_hcd and address 2 usb 2-6: configuration #1 chosen from 1 choice hub 2-6:1.0: USB hub found hub 2-6:1.0: 4 ports detected drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0022 usb 2-6.3: new low speed USB device using ohci_hcd and address 3 usb 2-6.3: configuration #1 chosen from 1 choice usb 2-6.4: new low speed USB device using ohci_hcd and address 4 usb 2-6.4: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev input: Lite-On Tech IBM USB Keyboard with UltraNav as /class/input/input2 input: USB HID v1.10 Keyboard [Lite-On Tech IBM USB Keyboard with UltraNav] on usb-0000:00:02.0-6.3 input: Lite-On Tech IBM USB Keyboard with UltraNav as /class/input/input3 input: USB HID v1.10 Device [Lite-On Tech IBM USB Keyboard with UltraNav] on usb-0000:00:02.0-6.3 input: Synaptics Inc. Composite TouchPad / TrackPoint as /class/input/input4 input: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:02.0-6.4 input: Synaptics Inc. Composite TouchPad / TrackPoint as /class/input/input5 input: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:02.0-6.4 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 gameport: EMU10K1 is pci0000:01:08.1/gameport0, io 0xc400, speed 1205kHz mice: PS/2 mouse device common for all mice md: raid1 personality registered for level 1 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Wed Dec 20 08:11:48 2006 UTC). ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 sidewinder.c: unknown joystick device detected on pci0000:01:08.1/gameport0, contact sidewinder.c: ID packet, 225 bits. [153952b1b912b1b913b1ab5295a95ab52912b52913b1291a95291ab12] sidewinder.c: Data packet, 5 bits. [ff] ALSA device list: #0: Audigy 1 [SB0090] (rev.3, serial:0x531102) at 0xc800, irq 19 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0xe md: Autodetecting RAID arrays. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda1 has different UUID to sdb3 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 010f1:2865 bound to 0000:00:0a.0 Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k Adding 979956k swap on /dev/sdb2. Priority:-2 extents:1 across:979956k EXT3 FS on md0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth1: no link during initialization. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) Subsystem: Tyan Computer Unknown device 2865 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) Subsystem: Tyan Computer Unknown device 2865 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: Tyan Computer Unknown device 2865 Flags: 66MHz, fast devsel, IRQ 7 I/O ports at fc00 [size=32] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Tyan Computer Unknown device 2865 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at febff000 (32-bit, non-prefetchable) [size=4K] Capabilities: 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Tyan Computer Unknown device 2865 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at feb00000 (32-bit, non-prefetchable) [size=256] Capabilities: 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP]) Subsystem: Tyan Computer Unknown device 2865 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at e800 [size=16] Capabilities: 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: Tyan Computer Unknown device 2865 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at d400 [size=16] Memory at febfc000 (32-bit, non-prefetchable) [size=4K] Capabilities: 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fc000000-fdffffff Prefetchable memory behind bridge: fea00000-feafffff 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) Subsystem: Tyan Computer Unknown device 2865 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at febfb000 (32-bit, non-prefetchable) [size=4K] I/O ports at d000 [size=8] Capabilities: 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fe800000-00000000fe8fffff Capabilities: 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fe700000-fe7fffff Prefetchable memory behind bridge: 00000000fe600000-00000000fe6fffff Capabilities: 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fe500000-fe5fffff Prefetchable memory behind bridge: 00000000fe400000-00000000fe4fffff Capabilities: 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: f4000000-fbffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel 01:05.0 Display controller: ATI Technologies Inc Rage XL (rev 27) Flags: stepping, medium devsel, IRQ 10 Memory at fc000000 (32-bit, non-prefetchable) [disabled] [size=16M] I/O ports at cc00 [disabled] [size=256] Memory at fdfff000 (32-bit, non-prefetchable) [disabled] [size=4K] [virtual] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: 01:08.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) Subsystem: Creative Labs SB0090 Audigy Player/OEM Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at c800 [size=32] Capabilities: 01:08.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03) Subsystem: Creative Labs SB Audigy MIDI/Game Port Flags: bus master, medium devsel, latency 32 I/O ports at c400 [size=8] Capabilities: 01:08.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI]) Subsystem: Creative Labs SB Audigy FireWire Port Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at fdffe000 (32-bit, non-prefetchable) [size=2K] Memory at fdff8000 (32-bit, non-prefetchable) [size=16K] Capabilities: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) Subsystem: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at fe5f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: 05:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) (prog-if 00 [VGA]) Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f4000000 (32-bit, non-prefetchable) [size=64M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at f8000000 [disabled] [size=128K] Capabilities: - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/