Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751489AbXAOW3Q (ORCPT ); Mon, 15 Jan 2007 17:29:16 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751511AbXAOW3Q (ORCPT ); Mon, 15 Jan 2007 17:29:16 -0500 Received: from mx.sileman.pl ([217.173.160.41]:32797 "EHLO mx.sileman.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751489AbXAOW3O (ORCPT ); Mon, 15 Jan 2007 17:29:14 -0500 From: "ris" To: Frederik Deweerdt Cc: linux-kernel@vger.kernel.org Subject: Re: High CPU usage with sata_nv Date: Tue, 16 Jan 2007 00:28:43 +0200 Message-Id: <20070115222320.M55059@elsat.net.pl> In-Reply-To: <20070115182642.GA18374@slug> References: <20070115164541.M22367@elsat.net.pl> <20070115165432.M87238@elsat.net.pl> <20070115182642.GA18374@slug> X-Mailer: Open WebMail 1.90 20030212 X-OriginatingIP: 217.173.173.29 (ris) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 X-SILEMAN-MailScanner-Information: Please contact the ISP for more information X-SILEMAN-MailScanner: Not scanned: please contact your Internet E-Mail Service Provider for details X-SILEMAN-MCPCheck: MCP-Clean, MCP-Checker (score=-4.9, required 1, BAYES_00 -4.90) X-SILEMAN-MailScanner-SpamCheck: not spam, SpamAssassin (timed out) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 22832 Lines: 511 On Mon, 15 Jan 2007 18:26:42 +0000, Frederik Deweerdt wrote > On Mon, Jan 15, 2007 at 06:54:50PM +0200, ris wrote: > > I have motherboard with nforce 590 SLI (MCP55) chipset. > > On other systems all its ok. > > > > But i tried a lot o kernels, configurations and always get cpu at 100% when > > copying files. > > I use SATA II samsung hard drive. > > > Any dmesg complain? Could you send the hdparm -I ? > Regards, > Frederik Ok ....... hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG SP2504C Serial Number: S09QJ13LA07964 Firmware Revision: VT100-50 Standards: Used: ATA/ATAPI-7 T13 1532D revision 4a Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 488397168 device size with M = 1024*1024: 238475 MBytes device size with M = 1000*1000: 250059 MBytes (250 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 1 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * Segmented DOWNLOAD_MICROCODE * SATA-I signaling speed (1.5Gb/s) * SATA-II signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 88min for SECURITY ERASE UNIT. 88min for ENHANCED SECURITY ERASE UNIT. Checksum: correct and dmesg.... Linux version 2.6.19-gentoo-r4 (root@redips) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #2 SMP Mon Jan 15 15:14:18 CET 2007 Command line: BOOT_IMAGE=Gentoo root=802 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 261856) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP (v002 Nvidia ) @ 0x00000000000f8040 ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0 ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003feed200 ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x000000003feed400 ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003feed480 ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003feed340 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x03000000) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 261856) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 261856 On node 0 totalpages: 261759 DMA zone: 56 pages used for memmap DMA zone: 938 pages reserved DMA zone: 3005 pages, LIFO batch:0 DMA32 zone: 3524 pages used for memmap DMA32 zone: 254236 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfefff000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000) PERCPU: Allocating 32000 bytes of per cpu data Built 1 zonelists. Total pages: 257241 Kernel command line: BOOT_IMAGE=Gentoo root=802 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ 6442000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1027032k/1047424k available (2217k kernel code, 19760k reserved, 916k data, 224k init) Calibrating delay using timer specific routine.. 4826.56 BogoMIPS (lpj=2413284) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 32k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12559544 Detected 12.559 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4821.95 BogoMIPS (lpj=2410976) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 13 cycles, maxerr 590 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer. time.c: Detected 2411.430 MHz processor. migration_cost=230 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 PCI: No mmconfig possible on device 00:18 pci_get_subsys() called while pci_devices is still empty ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:0e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz PCI-DMA: Disabling IOMMU. pnp: 00:01: ioport range 0x1000-0x107f could not be reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:04.0 IO window: a000-afff MEM window: fb000000-fdffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:12.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:16.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:17.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:12.0 to 64 PCI: Setting latency timer of device 0000:00:16.0 to 64 PCI: Setting latency timer of device 0000:00:17.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:04.0 to 64 pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie03] PCI: Setting latency timer of device 0000:00:12.0 to 64 pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:12.0:pcie00] Allocate Port Service[0000:00:12.0:pcie03] PCI: Setting latency timer of device 0000:00:16.0 to 64 pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:16.0:pcie00] Allocate Port Service[0000:00:16.0:pcie03] PCI: Setting latency timer of device 0000:00:17.0 to 64 pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:17.0:pcie00] Allocate Port Service[0000:00:17.0:pcie03] Real Time Clock Driver v1.12ac hpet_resources: 0xfefff000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize sata_nv 0000:00:0d.0: version 3.2 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0d.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 23 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0d.1 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 22 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 22 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x9E7 scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x967 ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:0d.2 to 64 ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 21 ata6: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 21 scsi4 : sata_nv ata5: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC807 scsi5 : sata_nv ata6: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC007 pata_amd 0000:00:0c.0: version 0.2.4 PCI: Setting latency timer of device 0000:00:0c.0 to 64 ata7: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF400 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF408 irq 15 scsi6 : pata_amd ATA: abnormal status 0x7F on port 0x1F7 ATA: abnormal status 0x7F on port 0x1F7 ata7.01: ATAPI, max UDMA/33 ata7.01: configured for UDMA/33 scsi7 : pata_amd ata8: port disabled. ignoring. ata8: reset failed, giving up scsi 6:0:1:0: CD-ROM LITE-ON DVDRW SOHW-832S CG5J PQ: 0 ANSI: 5 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (version 2.00.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure BIOS EDD facility v0.16 2004-Jun-25, 1 devices found ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 224k freed i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0a.1 to 64 ehci_hcd 0000:00:0a.1: EHCI Host Controller ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0a.1 ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000 ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ohci_hcd 0000:00:0a.0: OHCI Host Controller ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:10.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01043:8223 bound to 0000:00:10.0 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:0e.1 to 64 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:1:0: Attached scsi CD-ROM sr0 usb 2-1: new low speed USB device using ohci_hcd and address 2 hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... nvidia: module license 'NVIDIA' taints kernel. usb 2-1: configuration #1 chosen from 1 choice input: A4Tech PS/2+USB Mouse as /class/input/input0 input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:0a.0-1 ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006 usb 2-2: new low speed USB device using ohci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input1 input: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0a.0-2 input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input2 input,hiddev96: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0a.0-2 usb 2-4: new full speed USB device using ohci_hcd and address 4 usb 2-4: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1504 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com NTFS driver 2.1.27 [Flags: R/O MODULE]. NTFS volume version 3.1. Adding 995988k swap on /dev/sda8. Priority:-1 extents:1 across:995988k eth0: no IPv6 routers present - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/