Subject: Re: [PATCH V3 4/4] thermal: qcom: add support for PMIC5 Gen2 ADCTM
To:     Jishnu Prakash <quic_jprakash@quicinc.com>, agross@kernel.org,
        bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
        mka@chromium.org, robh+dt@kernel.org, knaack.h@gmx.de,
        lars@metafoo.de, pmeerw@pmeerw.net,
        manivannan.sadhasivam@linaro.org, linus.walleij@linaro.org,
        quic_kgunda@quicinc.com, quic_aghayal@quicinc.com,
        daniel.lezcano@linaro.org, rui.zhang@intel.com,
        quic_subbaram@quicinc.com, jic23@kernel.org, amitk@kernel.org,
        Thara Gopinath <thara.gopinath@linaro.org>,
        "Rafael J. Wysocki" <rafael@kernel.org>, linux-pm@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     linux-arm-msm-owner@vger.kernel.org, linux-iio@vger.kernel.org
References: <1637647025-20409-1-git-send-email-quic_jprakash@quicinc.com>
 <1637647025-20409-5-git-send-email-quic_jprakash@quicinc.com>
From:   Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Message-ID: <b0fb77da-812c-b1b7-81fa-cad0b6ba247c@linaro.org>
Date:   Mon, 29 Nov 2021 05:32:08 +0300
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.14.0
MIME-Version: 1.0
In-Reply-To: <1637647025-20409-5-git-send-email-quic_jprakash@quicinc.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-GB
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 23/11/2021 08:57, Jishnu Prakash wrote:
> Add support for PMIC5 Gen2 ADC_TM, used on PMIC7 chips. It is a
> close counterpart of PMIC7 ADC and has the same functionality as
> PMIC5 ADC_TM, for threshold monitoring and interrupt generation.
> It is present on PMK8350 alone, like PMIC7 ADC and can be used
> to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
> having ADC on a target, through PBS(Programmable Boot Sequence).
> 
> Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
> ---
>   drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 375 ++++++++++++++++++++++++++++++-
>   1 file changed, 372 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
> index fc8cd45..a7b33a8 100644
> --- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
> +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
> @@ -4,7 +4,10 @@
>    *
>    * Based on original driver:
>    * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
> + *
> + * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
>    */
> +
>   #include <linux/bitfield.h>
>   #include <linux/iio/adc/qcom-vadc-common.h>
>   #include <linux/iio/consumer.h>
> @@ -71,6 +74,60 @@
>   #define ADC_TM5_M_HIGH_THR_INT_EN			BIT(1)
>   #define ADC_TM5_M_LOW_THR_INT_EN			BIT(0)
>   
> +#define ADC_TM_GEN2_STATUS1			0x08
> +#define ADC_TM_GEN2_STATUS_LOW_SET		0x09
> +#define ADC_TM_GEN2_STATUS_LOW_CLR		0x0a
> +#define ADC_TM_GEN2_STATUS_HIGH_SET		0x0b
> +#define ADC_TM_GEN2_STATUS_HIGH_CLR		0x0c
> +
> +#define ADC_TM_GEN2_CFG_HS_SET			0x0d
> +#define ADC_TM_GEN2_CFG_HS_FLAG			BIT(0)
> +#define ADC_TM_GEN2_CFG_HS_CLR			0x0e
> +
> +#define ADC_TM_GEN2_SID				0x40
> +
> +#define ADC_TM_GEN2_CH_CTL			0x41
> +#define ADC_TM_GEN2_TM_CH_SEL			GENMASK(7, 5)
> +#define ADC_TM_GEN2_MEAS_INT_SEL		GENMASK(3, 2)
> +
> +#define ADC_TM_GEN2_ADC_DIG_PARAM		0x42
> +#define ADC_TM_GEN2_CTL_CAL_SEL			GENMASK(5, 4)
> +#define ADC_TM_GEN2_CTL_DEC_RATIO_MASK		GENMASK(3, 2)
> +
> +#define ADC_TM_GEN2_FAST_AVG_CTL		0x43
> +#define ADC_TM_GEN2_FAST_AVG_EN			BIT(7)
> +
> +#define ADC_TM_GEN2_ADC_CH_SEL_CTL		0x44
> +
> +#define ADC_TM_GEN2_DELAY_CTL			0x45
> +#define ADC_TM_GEN2_HW_SETTLE_DELAY		GENMASK(3, 0)
> +
> +#define ADC_TM_GEN2_EN_CTL1			0x46
> +#define ADC_TM_GEN2_EN				BIT(7)
> +
> +#define ADC_TM_GEN2_CONV_REQ			0x47
> +#define ADC_TM_GEN2_CONV_REQ_EN			BIT(7)
> +
> +#define ADC_TM_GEN2_LOW_THR0			0x49
> +#define ADC_TM_GEN2_LOW_THR1			0x4a
> +#define ADC_TM_GEN2_HIGH_THR0			0x4b
> +#define ADC_TM_GEN2_HIGH_THR1			0x4c
> +#define ADC_TM_GEN2_LOWER_MASK(n)		((n) & GENMASK(7, 0))
> +#define ADC_TM_GEN2_UPPER_MASK(n)		(((n) & GENMASK(15, 8)) >> 8)
> +
> +#define ADC_TM_GEN2_MEAS_IRQ_EN			0x4d
> +#define ADC_TM_GEN2_MEAS_EN			BIT(7)
> +#define ADC_TM5_GEN2_HIGH_THR_INT_EN		BIT(1)
> +#define ADC_TM5_GEN2_LOW_THR_INT_EN		BIT(0)
> +
> +#define ADC_TM_GEN2_MEAS_INT_LSB		0x50
> +#define ADC_TM_GEN2_MEAS_INT_MSB		0x51
> +#define ADC_TM_GEN2_MEAS_INT_MODE		0x52
> +
> +#define ADC_TM_GEN2_Mn_DATA0(n)			((n * 2) + 0xa0)
> +#define ADC_TM_GEN2_Mn_DATA1(n)			((n * 2) + 0xa1)
> +#define ADC_TM_GEN2_DATA_SHIFT			8
> +
>   enum adc5_timer_select {
>   	ADC5_TIMER_SEL_1 = 0,
>   	ADC5_TIMER_SEL_2,
> @@ -81,6 +138,7 @@ enum adc5_timer_select {
>   enum adc5_gen {
>   	ADC_TM5,
>   	ADC_TM_HC,
> +	ADC_TM5_GEN2,
>   	ADC_TM5_MAX
>   };
>   
> @@ -90,6 +148,14 @@ enum adc_tm5_cal_method {
>   	ADC_TM5_ABSOLUTE_CAL
>   };
>   
> +enum adc_tm_gen2_time_select {
> +	MEAS_INT_50MS = 0,
> +	MEAS_INT_100MS,
> +	MEAS_INT_1S,
> +	MEAS_INT_SET,
> +	MEAS_INT_NONE,
> +};
> +
>   struct adc_tm5_chip;
>   struct adc_tm5_channel;
>   
> @@ -112,6 +178,12 @@ struct adc_tm5_data {
>    * @prescale: channel scaling performed on the input signal.
>    * @hw_settle_time: the time between AMUX being configured and the
>    *	start of conversion.
> + * @decimation: sampling rate supported for the channel.
> + * @avg_samples: ability to provide single result from the ADC
> + *	that is an average of multiple measurements.
> + * @high_thr_en: channel upper voltage threshold enable state.
> + * @low_thr_en: channel lower voltage threshold enable state.
> + * @meas_en: recurring measurement enable state
>    * @iio: IIO channel instance used by this channel.
>    * @chip: ADC TM chip instance.
>    * @tzd: thermal zone device used by this channel.
> @@ -122,6 +194,11 @@ struct adc_tm5_channel {
>   	enum adc_tm5_cal_method	cal_method;
>   	unsigned int		prescale;
>   	unsigned int		hw_settle_time;
> +	unsigned int		decimation;	/* For Gen2 ADC_TM */
> +	unsigned int		avg_samples;	/* For Gen2 ADC_TM */
> +	bool			high_thr_en;	/* For Gen2 ADC_TM */
> +	bool			low_thr_en;	/* For Gen2 ADC_TM */
> +	bool			meas_en;	/* For Gen2 ADC_TM */
>   	struct iio_channel	*iio;
>   	struct adc_tm5_chip	*chip;
>   	struct thermal_zone_device *tzd;
> @@ -135,9 +212,15 @@ struct adc_tm5_channel {
>    * @channels: array of ADC TM channel data.
>    * @nchannels: amount of channels defined/allocated
>    * @decimation: sampling rate supported for the channel.
> + *      Applies to all channels, used only on Gen1 ADC_TM.
>    * @avg_samples: ability to provide single result from the ADC
> - *	that is an average of multiple measurements.
> + *      that is an average of multiple measurements. Applies to all
> + *      channels, used only on Gen1 ADC_TM.
>    * @base: base address of TM registers.
> + * @adc_mutex_lock: ADC_TM mutex lock, used only on Gen2 ADC_TM.
> + *      It is used to ensure only one ADC channel configuration
> + *      is done at a time using the shared set of configuration
> + *      registers.
>    */
>   struct adc_tm5_chip {
>   	struct regmap		*regmap;
> @@ -148,6 +231,7 @@ struct adc_tm5_chip {
>   	unsigned int		decimation;
>   	unsigned int		avg_samples;
>   	u16			base;
> +	struct mutex		adc_mutex_lock;
>   };
>   
>   static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
> @@ -214,6 +298,61 @@ static irqreturn_t adc_tm5_isr(int irq, void *data)
>   	return IRQ_HANDLED;
>   }
>   
> +static irqreturn_t adc_tm5_gen2_isr(int irq, void *data)
> +{
> +	struct adc_tm5_chip *chip = data;
> +	u8 status_low, status_high;
> +	int ret, i;
> +
> +	ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low));
> +	if (ret) {
> +		dev_err(chip->dev, "read status_low failed: %d\n", ret);
> +		return IRQ_HANDLED;
> +	}
> +
> +	ret = adc_tm5_read(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high));
> +	if (ret) {
> +		dev_err(chip->dev, "read status_high failed: %d\n", ret);
> +		return IRQ_HANDLED;
> +	}
> +
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_LOW_CLR, &status_low, sizeof(status_low));
> +	if (ret < 0) {
> +		dev_err(chip->dev, "clear status low failed with %d\n", ret);
> +		return IRQ_HANDLED;
> +	}
> +
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_STATUS_HIGH_CLR, &status_high, sizeof(status_high));
> +	if (ret < 0) {
> +		dev_err(chip->dev, "clear status high failed with %d\n", ret);
> +		return IRQ_HANDLED;
> +	}
> +
> +	for (i = 0; i < chip->nchannels; i++) {
> +		bool upper_set = false, lower_set = false;
> +		unsigned int ch = chip->channels[i].channel;
> +
> +		/* No TZD, we warned at the boot time */
> +		if (!chip->channels[i].tzd)
> +			continue;
> +
> +		if (!chip->channels[i].meas_en)
> +			continue;
> +
> +		lower_set = (status_low & BIT(ch)) &&
> +			(chip->channels[i].low_thr_en);
> +
> +		upper_set = (status_high & BIT(ch)) &&
> +			(chip->channels[i].high_thr_en);
> +
> +		if (upper_set || lower_set)
> +			thermal_zone_device_update(chip->channels[i].tzd,
> +						   THERMAL_EVENT_UNSPECIFIED);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
>   static int adc_tm5_get_temp(void *data, int *temp)
>   {
>   	struct adc_tm5_channel *channel = data;
> @@ -244,6 +383,104 @@ static int adc_tm5_disable_channel(struct adc_tm5_channel *channel)
>   				  0);
>   }
>   
> +#define ADC_TM_GEN2_POLL_DELAY_MIN_US		100
> +#define ADC_TM_GEN2_POLL_DELAY_MAX_US		110
> +#define ADC_TM_GEN2_POLL_RETRY_COUNT		3
> +
> +static int32_t adc_tm5_gen2_conv_req(struct adc_tm5_chip *chip)
> +{
> +	int ret;
> +	u8 data;
> +	unsigned int count;
> +
> +	data = ADC_TM_GEN2_EN;
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_EN_CTL1, &data, 1);
> +	if (ret < 0) {
> +		dev_err(chip->dev, "adc-tm enable failed with %d\n", ret);
> +		return ret;
> +	}
> +
> +	data = ADC_TM_GEN2_CFG_HS_FLAG;
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_CFG_HS_SET, &data, 1);
> +	if (ret < 0) {
> +		dev_err(chip->dev, "adc-tm handshake failed with %d\n", ret);
> +		return ret;
> +	}
> +
> +	data = ADC_TM_GEN2_CONV_REQ_EN;
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_CONV_REQ, &data, 1);
> +	if (ret < 0) {
> +		dev_err(chip->dev, "adc-tm request conversion failed with %d\n", ret);
> +		return ret;
> +	}
> +
> +	/*
> +	 * SW sets a handshake bit and waits for PBS to clear it
> +	 * before the next conversion request can be queued.
> +	 */
> +
> +	for (count = 0; count < ADC_TM_GEN2_POLL_RETRY_COUNT; count++) {
> +		ret = adc_tm5_read(chip, ADC_TM_GEN2_CFG_HS_SET, &data, sizeof(data));
> +		if (ret < 0) {
> +			dev_err(chip->dev, "adc-tm read failed with %d\n", ret);
> +			return ret;
> +		}
> +
> +		if (!(data & ADC_TM_GEN2_CFG_HS_FLAG))
> +			return ret;
> +		usleep_range(ADC_TM_GEN2_POLL_DELAY_MIN_US,
> +			ADC_TM_GEN2_POLL_DELAY_MAX_US);
> +	}
> +
> +	dev_err(chip->dev, "adc-tm conversion request handshake timed out\n");
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int adc_tm5_gen2_disable_channel(struct adc_tm5_channel *channel)
> +{
> +	struct adc_tm5_chip *chip = channel->chip;
> +	int ret;
> +	u8 val;
> +
> +	mutex_lock(&chip->adc_mutex_lock);
> +
> +	channel->meas_en = false;
> +	channel->high_thr_en = false;
> +	channel->low_thr_en = false;
> +
> +	ret = adc_tm5_read(chip, ADC_TM_GEN2_CH_CTL, &val, sizeof(val));
> +	if (ret < 0) {
> +		dev_err(chip->dev, "adc-tm block read failed with %d\n", ret);
> +		goto disable_fail;
> +	}
> +
> +	val &= ~ADC_TM_GEN2_TM_CH_SEL;
> +	val |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel);
> +
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_CH_CTL, &val, 1);
> +	if (ret < 0) {
> +		dev_err(chip->dev, "adc-tm channel disable failed with %d\n", ret);
> +		goto disable_fail;
> +	}
> +
> +	val = 0;
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_MEAS_IRQ_EN, &val, 1);
> +	if (ret < 0) {
> +		dev_err(chip->dev, "adc-tm interrupt disable failed with %d\n", ret);
> +		goto disable_fail;
> +	}
> +
> +
> +	ret = adc_tm5_gen2_conv_req(channel->chip);
> +	if (ret < 0)
> +		dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret);
> +
> +disable_fail:
> +	mutex_unlock(&chip->adc_mutex_lock);
> +	return ret;
> +}
> +
>   static int adc_tm5_enable(struct adc_tm5_chip *chip)
>   {
>   	int ret;
> @@ -324,6 +561,86 @@ static int adc_tm5_configure(struct adc_tm5_channel *channel, int low, int high)
>   	return adc_tm5_enable(chip);
>   }
>   
> +static int adc_tm5_gen2_configure(struct adc_tm5_channel *channel, int low, int high)
> +{
> +	struct adc_tm5_chip *chip = channel->chip;
> +	int ret;
> +	u8 buf[14];
> +	u16 adc_code;
> +
> +	mutex_lock(&chip->adc_mutex_lock);
> +
> +	channel->meas_en = true;
> +
> +	ret = adc_tm5_read(chip, ADC_TM_GEN2_SID, buf, sizeof(buf));
> +	if (ret < 0) {
> +		dev_err(chip->dev, "adc-tm block read failed with %d\n", ret);
> +		goto config_fail;
> +	}
> +
> +	/* Set SID from virtual channel number */
> +	buf[0] = channel->adc_channel >> 8;
> +
> +	/* Set TM channel number used and measurement interval */
> +	buf[1] &= ~ADC_TM_GEN2_TM_CH_SEL;
> +	buf[1] |= FIELD_PREP(ADC_TM_GEN2_TM_CH_SEL, channel->channel);
> +	buf[1] &= ~ADC_TM_GEN2_MEAS_INT_SEL;
> +	buf[1] |= FIELD_PREP(ADC_TM_GEN2_MEAS_INT_SEL, MEAS_INT_1S);
> +
> +	buf[2] &= ~ADC_TM_GEN2_CTL_DEC_RATIO_MASK;
> +	buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_DEC_RATIO_MASK, channel->decimation);
> +	buf[2] &= ~ADC_TM_GEN2_CTL_CAL_SEL;
> +	buf[2] |= FIELD_PREP(ADC_TM_GEN2_CTL_CAL_SEL, channel->cal_method);
> +
> +	buf[3] = channel->avg_samples | ADC_TM_GEN2_FAST_AVG_EN;
> +
> +	buf[4] = channel->adc_channel & 0xff;
> +
> +	buf[5] = channel->hw_settle_time & ADC_TM_GEN2_HW_SETTLE_DELAY;
> +
> +	/* High temperature corresponds to low voltage threshold */
> +	if (high != INT_MAX) {
> +		channel->low_thr_en = true;
> +		adc_code = qcom_adc_tm5_gen2_temp_res_scale(high);
> +
> +		buf[9] = adc_code & 0xff;
> +		buf[10] = adc_code >> 8;
> +	} else {
> +		channel->low_thr_en = false;
> +	}
> +
> +	/* Low temperature corresponds to high voltage threshold */
> +	if (low != -INT_MAX) {
> +		channel->high_thr_en = true;
> +		adc_code = qcom_adc_tm5_gen2_temp_res_scale(low);
> +
> +		buf[11] = adc_code & 0xff;
> +		buf[12] = adc_code >> 8;
> +	} else {
> +		channel->high_thr_en = false;
> +	}
> +
> +	buf[13] = ADC_TM_GEN2_MEAS_EN;
> +	if (channel->high_thr_en)
> +		buf[13] |= ADC_TM5_GEN2_HIGH_THR_INT_EN;
> +	if (channel->low_thr_en)
> +		buf[13] |= ADC_TM5_GEN2_LOW_THR_INT_EN;
> +
> +	ret = adc_tm5_write(chip, ADC_TM_GEN2_SID, buf, sizeof(buf));
> +	if (ret) {
> +		dev_err(chip->dev, "channel %d params write failed: %d\n", channel->channel, ret);
> +		goto config_fail;
> +	}
> +
> +	ret = adc_tm5_gen2_conv_req(channel->chip);
> +	if (ret < 0)
> +		dev_err(chip->dev, "adc-tm channel configure failed with %d\n", ret);
> +
> +config_fail:
> +	mutex_unlock(&chip->adc_mutex_lock);
> +	return ret;
> +}
> +
>   static int adc_tm5_set_trips(void *data, int low, int high)
>   {
>   	struct adc_tm5_channel *channel = data;
> @@ -422,6 +739,11 @@ static int adc_tm5_init(struct adc_tm5_chip *chip)
>   		}
>   	}
>   
> +	mutex_init(&chip->adc_mutex_lock);

Minor issue. This way, the mutex is left uninitialized for ADC_TM5_HC 
devices. I'd move the mutex_init() call to the _probe function itself.

> +
> +	if (chip->data->gen == ADC_TM5_GEN2)
> +		return ret;
> +

Please do not do this. Create a separate adc_tm5_gen2_init function.
Add init() callback to adc_tm5_data structure.

>   	buf[0] = chip->decimation;
>   	buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
>   	buf[2] = ADC_TM5_TIMER1;
> @@ -442,7 +764,7 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
>   				       struct device_node *node)
>   {
>   	const char *name = node->name;
> -	u32 chan, value, varr[2];
> +	u32 chan, value, adc_channel, varr[2];
>   	int ret;
>   	struct device *dev = adc_tm->dev;
>   	struct of_phandle_args args;
> @@ -472,7 +794,11 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
>   	}
>   	of_node_put(args.np);
>   
> -	if (args.args_count != 1 || args.args[0] >= ADC5_MAX_CHANNEL) {
> +	adc_channel = args.args[0];
> +	if (adc_tm->data->gen == ADC_TM5_GEN2)
> +		adc_channel &= 0xff;
> +
> +	if (args.args_count != 1 || adc_channel >= ADC5_MAX_CHANNEL) {

Here you read the data (args.args[0]) before checking that it is 
actually available (args.args_count is not zero). Please correct the 
sequence.

>   		dev_err(dev, "%s: invalid ADC channel number %d\n", name, chan);
>   		return -EINVAL;
>   	}
> @@ -518,6 +844,32 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
>   	else
>   		channel->cal_method = ADC_TM5_ABSOLUTE_CAL;
>   
> +	if (adc_tm->data->gen == ADC_TM5_GEN2) {
> +		ret = of_property_read_u32(node, "qcom,decimation", &value);
> +		if (!ret) {
> +			ret = qcom_adc5_decimation_from_dt(value, adc_tm->data->decimation);
> +			if (ret < 0) {
> +				dev_err(dev, "invalid decimation %d\n", value);
> +				return ret;
> +			}
> +			channel->decimation = ret;
> +		} else {
> +			channel->decimation = ADC5_DECIMATION_DEFAULT;
> +		}
> +
> +		ret = of_property_read_u32(node, "qcom,avg-samples", &value);
> +		if (!ret) {
> +			ret = qcom_adc5_avg_samples_from_dt(value);
> +			if (ret < 0) {
> +				dev_err(dev, "invalid avg-samples %d\n", value);
> +				return ret;
> +			}
> +			channel->avg_samples = ret;
> +		} else {
> +			channel->avg_samples = VADC_DEF_AVG_SAMPLES;
> +		}
> +	}
> +
>   	return 0;
>   }
>   
> @@ -546,6 +898,19 @@ static const struct adc_tm5_data adc_tm_hc_data_pmic = {
>   	.gen = ADC_TM_HC,
>   };
>   
> +static const struct adc_tm5_data adc_tm5_gen2_data_pmic = {
> +	.full_scale_code_volt = 0x70e4,
> +	.decimation = (unsigned int []) { 85, 340, 1360 },
> +	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
> +					 1000, 2000, 4000, 8000, 16000, 32000,
> +					 64000, 128000 },
> +	.disable_channel = adc_tm5_gen2_disable_channel,
> +	.configure = adc_tm5_gen2_configure,
> +	.isr = adc_tm5_gen2_isr,
> +	.irq_name = "pm-adc-tm5-gen2",
> +	.gen = ADC_TM5_GEN2,
> +};
> +
>   static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node)
>   {
>   	struct adc_tm5_channel *channels;
> @@ -671,6 +1036,10 @@ static const struct of_device_id adc_tm5_match_table[] = {
>   		.compatible = "qcom,spmi-adc-tm-hc",
>   		.data = &adc_tm_hc_data_pmic,
>   	},
> +	{
> +		.compatible = "qcom,spmi-adc-tm5-gen2",
> +		.data = &adc_tm5_gen2_data_pmic,
> +	},
>   	{ }
>   };
>   MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
> 


-- 
With best wishes
Dmitry