Date:   Tue, 30 Nov 2021 11:00:49 +0530
From:   Vinod Koul <vkoul@kernel.org>
To:     Peter Collingbourne <pcc@google.com>
Cc:     Robert Foss <robert.foss@linaro.org>,
        John Stultz <john.stultz@linaro.org>,
        Anibal Limon <anibal.limon@linaro.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] lontium-lt9611: check a different register bit for HDMI
 sensing
Message-ID: <YaW3Cff+AJqT8tS/@matsya>
References: <20211117020724.2647769-1-pcc@google.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20211117020724.2647769-1-pcc@google.com>
Precedence: bulk

On 16-11-21, 18:07, Peter Collingbourne wrote:
> It has been observed that with certain monitors such as the HP Z27n,
> the register 0x825e reads a value of 0x79 when the HDMI cable is
> connected and 0x78 when it is disconnected, i.e. bit 0 appears
> to correspond to the HDMI connection status and bit 2 is never
> set. Therefore, change the driver to check bit 0 instead of bit 2.

So we have got limited information on this but BIT-2 seems to be related
to HPD and empirical data from various monitors supports this, so this
seems the right thing to do.

Reviewed-by: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod