From:   Dmitry Osipenko <digetx@gmail.com>
To:     Thierry Reding <thierry.reding@gmail.com>,
        Jonathan Hunter <jonathanh@nvidia.com>,
        Ulf Hansson <ulf.hansson@linaro.org>,
        Viresh Kumar <vireshk@kernel.org>,
        Stephen Boyd <sboyd@kernel.org>,
        Peter De Schrijver <pdeschrijver@nvidia.com>,
        Mikko Perttunen <mperttunen@nvidia.com>,
        Lee Jones <lee.jones@linaro.org>,
        =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= 
        <u.kleine-koenig@pengutronix.de>, Nishanth Menon <nm@ti.com>,
        Adrian Hunter <adrian.hunter@intel.com>,
        Michael Turquette <mturquette@baylibre.com>
Cc:     linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
        linux-pm@vger.kernel.org, linux-pwm@vger.kernel.org,
        linux-mmc@vger.kernel.org, dri-devel@lists.freedesktop.org,
        linux-clk@vger.kernel.org, David Heidelberg <david@ixit.cz>
Subject: [PATCH v16 12/40] drm/tegra: hdmi: Add OPP support
Date:   Wed,  1 Dec 2021 02:23:19 +0300
Message-Id: <20211130232347.950-13-digetx@gmail.com>
In-Reply-To: <20211130232347.950-1-digetx@gmail.com>
References: <20211130232347.950-1-digetx@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The HDMI on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now HDMI driver must use
OPP API for driving the controller's clock rate because OPP API takes
care of reconfiguring the domain's performance state based on HDMI clock
rate. Add OPP support to the HDMI driver.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/gpu/drm/tegra/hdmi.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index e5d2a4026028..9a87d351a828 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -11,10 +11,13 @@
 #include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include <soc/tegra/common.h>
+
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_debugfs.h>
@@ -1195,7 +1198,7 @@ static void tegra_hdmi_encoder_enable(struct drm_encoder *encoder)
 	h_back_porch = mode->htotal - mode->hsync_end;
 	h_front_porch = mode->hsync_start - mode->hdisplay;
 
-	err = clk_set_rate(hdmi->clk, hdmi->pixel_clock);
+	err = dev_pm_opp_set_rate(hdmi->dev, hdmi->pixel_clock);
 	if (err < 0) {
 		dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n",
 			err);
@@ -1732,7 +1735,14 @@ static int tegra_hdmi_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, hdmi);
-	pm_runtime_enable(&pdev->dev);
+
+	err = devm_pm_runtime_enable(&pdev->dev);
+	if (err)
+		return err;
+
+	err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
+	if (err)
+		return err;
 
 	INIT_LIST_HEAD(&hdmi->client.list);
 	hdmi->client.ops = &hdmi_client_ops;
@@ -1753,8 +1763,6 @@ static int tegra_hdmi_remove(struct platform_device *pdev)
 	struct tegra_hdmi *hdmi = platform_get_drvdata(pdev);
 	int err;
 
-	pm_runtime_disable(&pdev->dev);
-
 	err = host1x_client_unregister(&hdmi->client);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to unregister host1x client: %d\n",
-- 
2.33.1