From:   Adam Ford <aford173@gmail.com>
To:     linux-media@vger.kernel.org
Cc:     ezequiel@vanguardiasur.com.ar, hverkuil@xs4all.nl,
        tharvey@gateworks.com, nicolas@ndufresne.ca,
        aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
        linux-staging@lists.linux.dev
Subject: [RFC V2 2/2] arm64: dts: imx8mm: Enable VPU-G1 and VPU-G2
Date:   Tue, 30 Nov 2021 19:33:29 -0600
Message-Id: <20211201013329.15875-3-aford173@gmail.com>
In-Reply-To: <20211201013329.15875-1-aford173@gmail.com>
References: <20211201013329.15875-1-aford173@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Enable two hardware Hantro decoders called G1 and G2.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c2f3f118f82e..eb9dcd9d1a31 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1197,6 +1197,47 @@ gpu_2d: gpu@38008000 {
 			power-domains = <&pgc_gpu>;
 		};
 
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu";
+			reg = <0x38300000 0x10000>;
+			reg-names = "g1";
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g1";
+			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+			clock-names = "g1", "bus";
+			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+					  <&clk IMX8MM_CLK_VPU_BUS>,
+					  <&clk IMX8MM_VPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+						 <&clk IMX8MM_SYS_PLL1_800M>,
+						 <&clk IMX8MM_VPU_PLL>;
+			assigned-clock-rates = <600000000>,
+					       <800000000>,
+					       <0>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mm-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g2";
+			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+			clock-names = "g2",  "bus";
+			assigned-clocks = <&clk IMX8MM_CLK_VPU_G2>,
+					 <&clk IMX8MM_CLK_VPU_BUS>,
+					 <&clk IMX8MM_VPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+						<&clk IMX8MM_SYS_PLL1_800M>,
+						<&clk IMX8MM_VPU_PLL>;
+			assigned-clock-rates = <600000000>,
+					       <800000000>,
+					       <0>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+		};
+
 		vpu_blk_ctrl: blk-ctrl@38330000 {
 			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
 			reg = <0x38330000 0x100>;
-- 
2.32.0