MIME-Version: 1.0
References: <20211122103032.517923-1-maz@kernel.org> <CAMuHMdX2ZRvDYA3idmw3nBcP6CO=2od6ZU-UeJo9vYsuB=fQNQ@mail.gmail.com>
 <8735no70tt.wl-maz@kernel.org> <CAMuHMdVS67BLP2XEdD6ZvVBVE2x11gKnQa1TqG659HXPM5scqQ@mail.gmail.com>
 <CAMuHMdWJhnXabKGpW7k944dzQHtwQtxw-yb2bRBsoaMw6N6nuA@mail.gmail.com>
 <87tug3clvc.wl-maz@kernel.org> <CAMuHMdWGb2xik+94RVwtq8E6+9eN=HfQLX3a4sTjKQXR96Udkw@mail.gmail.com>
 <87r1b7ck40.wl-maz@kernel.org> <OSZPR01MB7019E7DD7119EFF9C994AA62AA649@OSZPR01MB7019.jpnprd01.prod.outlook.com>
 <87tufvmes9.wl-maz@kernel.org> <CA+V-a8siHRjF+bJu88QFwz0a_MZ+kiJEwmER58_feyr8O+WNGA@mail.gmail.com>
 <CAL_JsqK+GcnChx3i9fsYnw+FzZgON4PtKB=CzYLUj6sXtxX6fQ@mail.gmail.com>
 <CA+V-a8sVS_1hUWJ3uM+VffGyMtdnctBOJTyHTQAoJZGOh0a1Tw@mail.gmail.com>
 <87bl21mqwk.wl-maz@kernel.org> <CA+V-a8vA0P-yhm2SHJmVh+cuUw7qodQLQBqzNPTz31x5q18xaA@mail.gmail.com>
In-Reply-To: <CA+V-a8vA0P-yhm2SHJmVh+cuUw7qodQLQBqzNPTz31x5q18xaA@mail.gmail.com>
From:   Rob Herring <robh@kernel.org>
Date:   Wed, 1 Dec 2021 08:35:55 -0600
Message-ID: <CAL_JsqJ1Dw9C_GQjto-E2ch7fdN=3f4Qz9qYuf2iYwMRLkdroA@mail.gmail.com>
Subject: Re: [PATCH] of/irq: Add a quirk for controllers with their own
 definition of interrupt-map
To:     "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Cc:     Marc Zyngier <maz@kernel.org>,
        Geert Uytterhoeven <geert@linux-m68k.org>,
        Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        "kernel-team@android.com" <kernel-team@android.com>,
        John Crispin <john@phrozen.org>, Biwen Li <biwen.li@nxp.com>,
        Chris Brandt <Chris.Brandt@renesas.com>,
        "linux-renesas-soc@vger.kernel.org" 
        <linux-renesas-soc@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Wed, Dec 1, 2021 at 7:37 AM Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
>
> Hi Marc/Rob,
>
> On Tue, Nov 30, 2021 at 6:37 PM Marc Zyngier <maz@kernel.org> wrote:
> >
> > On Tue, 30 Nov 2021 12:52:21 +0000,
> > "Lad, Prabhakar" <prabhakar.csengg@gmail.com> wrote:
> > >
> > > On Mon, Nov 29, 2021 at 6:33 PM Rob Herring <robh@kernel.org> wrote:
> > > >
> > > > interrupts would work just fine here:
> > > >
> > > > interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> > > >   <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> > > >   <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> > > >   <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> > > >   <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> > > >   <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> > > >   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> > > >   <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> > > >
> > > > We don't need a different solution for N:1 interrupts from N:M. Sure,
> > > > that could become unweldy if there are a lot of interrupts (just like
> > > > interrupt-map), but is that an immediate problem?
> > > >
> > > It's just that with this approach the driver will have to index the
> > > interrupts instead of reading from DT.
> > >
> > > Marc - is it OK with the above approach?
> >
> > Anything that uses standard properties in a standard way works for me.
> >
> I added interrupts property now instead of interrupt-map as below:
>
> irqc: interrupt-controller@110a0000 {
>       compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
>        #address-cells = <0>;
>        interrupt-parent = <&gic>;
>        interrupt-controller;
>        reg = <0 0x110a0000 0 0x10000>;
>        interrupts =
>                       <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
>                      <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
>          clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
>                        <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
>           clock-names = "clk", "pclk";
>           power-domains = <&cpg>;
>           resets = <&cpg R9A07G044_IA55_RESETN>;
> };
>
>
> In the hierarchal interrupt code its parsed as below:
> on probe fetch the details:
> range = of_get_property(np, "interrupts", &len);
> if (!range)
>       return -EINVAL;
>
> for (len /= sizeof(*range), j = 0; len >= 3; len -= 3) {
>       if (j >= IRQC_NUM_IRQ)
>             return -EINVAL;
>
>       priv->map[j].args[0] = be32_to_cpu(*range++);
>       priv->map[j].args[1] = be32_to_cpu(*range++);
>       priv->map[j].args[2] = be32_to_cpu(*range++);
>       priv->map[j].args_count = 3;
>       j++;

Not sure what's wrong, but you shouldn't be doing your own parsing.
The setup shouldn't look much different than a GPIO controller
interrupts except you have multiple parent interrupts.

Rob