From:   Laurent Dufour <ldufour@linux.ibm.com>
To:     linuxppc-dev@lists.ozlabs.org
Cc:     linux-kernel@vger.kernel.org, Nathan Lynch <nathanl@linux.ibm.com>
Subject: [PATCH v2] powerpc/pseries: read the lpar name from the firmware
Date:   Wed,  1 Dec 2021 20:06:42 +0100
Message-Id: <20211201190642.49897-1-ldufour@linux.ibm.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The LPAR name may be changed after the LPAR has been started in the HMC.
In that case lparstat command is not reporting the updated value because it
reads it from the device tree which is read at boot time.

However this value could be read from RTAS.

Adding this value in the /proc/powerpc/lparcfg output allows to read the
updated value.

Cc: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
---
v2:
 address Nathan's comments.
 change title to partition_name aligning with existing partition_id
---
 arch/powerpc/platforms/pseries/lparcfg.c | 53 ++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/lparcfg.c b/arch/powerpc/platforms/pseries/lparcfg.c
index f71eac74ea92..0deca7b4cd81 100644
--- a/arch/powerpc/platforms/pseries/lparcfg.c
+++ b/arch/powerpc/platforms/pseries/lparcfg.c
@@ -311,6 +311,58 @@ static void parse_mpp_x_data(struct seq_file *m)
 		seq_printf(m, "coalesce_pool_spurr=%ld\n", mpp_x_data.pool_spurr_cycles);
 }
 
+/*
+ * PAPR defines no maximum for the LPAR name, and defines that the maximum
+ * length of the get-system-parameter's output buffer is 4000 plus 2 bytes for
+ * the length. Limit LPAR's name size to 1024
+ */
+#define SPLPAR_LPAR_NAME_MAXLEN	1026
+#define SPLPAR_LPAR_NAME_TOKEN	55
+static void parse_lpar_name(struct seq_file *m)
+{
+	int rc, len, token;
+	unsigned char *local_buffer;
+
+	token = rtas_token("ibm,get-system-parameter");
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return;
+
+	local_buffer = kmalloc(SPLPAR_LPAR_NAME_MAXLEN, GFP_KERNEL);
+	if (!local_buffer)
+		return;
+
+	do {
+		spin_lock(&rtas_data_buf_lock);
+
+		memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
+		rc = rtas_call(token, 3, 1, NULL, SPLPAR_LPAR_NAME_TOKEN,
+			       __pa(rtas_data_buf), RTAS_DATA_BUF_SIZE);
+		memcpy(local_buffer, rtas_data_buf, SPLPAR_LPAR_NAME_MAXLEN);
+
+		spin_unlock(&rtas_data_buf_lock);
+	} while (rtas_busy_delay(rc));
+
+	if (rc != 0) {
+		pr_err_once(
+			"%s %s Error calling get-system-parameter (0x%x)\n",
+			__FILE__, __func__, rc);
+	} else {
+		local_buffer[SPLPAR_LPAR_NAME_MAXLEN - 1] = '\0';
+		len = local_buffer[0] * 256 + local_buffer[1];
+
+		/*
+		 * Forces an empty string in the weird case fw reports no data.
+		 */
+		if (!len)
+			local_buffer[2] = '\0';
+
+		seq_printf(m, "partition_name=%s\n", local_buffer + 2);
+	}
+
+	kfree(local_buffer);
+}
+
+
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
 #define SPLPAR_MAXLENGTH 1026*(sizeof(char))
 
@@ -496,6 +548,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
 		/* this call handles the ibm,get-system-parameter contents */
+		parse_lpar_name(m);
 		parse_system_parameter_string(m);
 		parse_ppp_data(m);
 		parse_mpp_data(m);
-- 
2.34.1