Message-ID: <b30924749421fe30df8a559e9a9ecd21b8d257e6.camel@ndufresne.ca>
Subject: Re: [RFC V3 0/2] arm64: imx8mm: Enable Hantro VPUs
From:   Nicolas Dufresne <nicolas@ndufresne.ca>
To:     Adam Ford <aford173@gmail.com>, linux-media@vger.kernel.org
Cc:     ezequiel@vanguardiasur.com.ar, tharvey@gateworks.com,
        aford@beaconembedded.com, hverkuil-cisco@xs4all.nl,
        Rob Herring <robh+dt@kernel.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
        linux-staging@lists.linux.dev
Date:   Thu, 02 Dec 2021 22:57:30 -0500
In-Reply-To: <20211202041627.291625-1-aford173@gmail.com>
References: <20211202041627.291625-1-aford173@gmail.com>
Content-Type: text/plain; charset="UTF-8"
User-Agent: Evolution 3.42.1 (3.42.1-1.fc35) 
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Le mercredi 01 décembre 2021 à 22:16 -0600, Adam Ford a écrit :
> The i.MX8M has two Hantro video decoders, called G1 and G2 which appear
> to be related to the video decoders used on the i.MX8MQ, but because of
> how the Mini handles the power domains, the VPU driver does not need to
> handle all the functions, so a new compatible flag is required.
> 
> V3 is rebased from git://linuxtv.org/hverkuil/media_tree.git for-v5.17c
> This branch has support for VP9.
> 
> I set cma=512M, but this may not be enough memory as some tests appeard to run out of memory

Consider passing -j1 to fluster and using patience, this will spare some memory.
You can also increase the timeout (like -t 60), that often helps when CMA is
involved (due to software conversion happening). Thanks for the serious testing,
this is really appreciated that your submission really reflects the state.

> 
> V3 of this series has several changes:
> 
> Update imx8m_vpu_hw to add missing 'reg' reference names for G2 and include references to VP9
> Update device tree to remove IMX8MQ_VPU_RESET, remove some duplicate vpu clock parenting
> Fix missing reg-names from vpu_g2 node.
> Apply patch [1] to manage the power domains powering down.
> [1] - https://lore.kernel.org/linux-arm-kernel/20211016210547.171717-1-marex@denx.de/t/
> 
> With the above, the following Fluster scores are produced:
> 
> G1:
> ./fluster.py run -dGStreamer-H.264-V4L2SL-Gst1.0
> Ran 90/135 tests successfully               in 74.406 secs

This matches my results on imx8mq.

> 
> ./fluster.py run -d GStreamer-VP8-V4L2SL-Gst1.0
> Ran 55/61 tests successfully               in 8.080 secs

Idem.

> 
> G2:
> ./fluster.py run -d GStreamer-VP9-V4L2SL-Gst1.0
> Ran 127/303 tests successfully               in 203.873 secs

Benjamin reports 129, it could be flux. This is still a bit early, hence the low
score. But most streams do playback normally.

> 
> Fluster and G-Streamer were both built from their respective git repos using their respective master/main branches.

That gave me an idea, I'll try and print the GStreamer version/commit inside
fluster along with fluster own commit (ideally in the short summary).

> 
> 
> Adam Ford (2):
>   media: hantro: Add support for i.MX8M Mini
>   arm64: dts: imx8mm: Enable VPU-G1 and VPU-G2
> 
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi   | 41 +++++++++++++
>  drivers/staging/media/hantro/hantro_drv.c   |  2 +
>  drivers/staging/media/hantro/hantro_hw.h    |  2 +
>  drivers/staging/media/hantro/imx8m_vpu_hw.c | 65 +++++++++++++++++++++
>  4 files changed, 110 insertions(+)
>