From:   Amjad Ouled-Ameur <aouledameur@baylibre.com>
To:     khilman@baylibre.com
Cc:     Amjad Ouled-Ameur <aouledameur@baylibre.com>,
        p.zabel@pengutronix.de, balbi@kernel.org, jbrunet@baylibre.com,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-usb@vger.kernel.org
Subject: [PATCH v4 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
Date:   Sun,  5 Dec 2021 22:58:44 +0100
Message-Id: <20211205215846.153703-2-aouledameur@baylibre.com>
In-Reply-To: <20211205215846.153703-1-aouledameur@baylibre.com>
References: <20211205215846.153703-1-aouledameur@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use reset_control_rearm() call if an error occurs in case
phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case
phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used
and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset
framework. Therefore, use of reset_control_reset() on shared reset line
should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
---
changes since v3:
- Remove unnecessary reset_control_rearm() after reset_control_reset()
failure.

 drivers/phy/amlogic/phy-meson-gxl-usb2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 2b3c0d730f20..d2f56075dc57 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -125,6 +125,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy)
 	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(priv->clk);
+	reset_control_rearm(priv->reset);
 
 	return 0;
 }
-- 
2.25.1