From:   David Virag <virag.david003@gmail.com>
Cc:     Sam Protsenko <semen.protsenko@linaro.org>,
        David Virag <virag.david003@gmail.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
        Rob Herring <robh+dt@kernel.org>,
        Sylwester Nawrocki <s.nawrocki@samsung.com>,
        Tomasz Figa <tomasz.figa@gmail.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH v2 5/7] clk: samsung: clk-pll: Add support for pll1417x
Date:   Sun,  5 Dec 2021 23:11:04 +0100
Message-Id: <20211205221108.193400-6-virag.david003@gmail.com>
In-Reply-To: <20211205221108.193400-1-virag.david003@gmail.com>
References: <20211205221108.193400-1-virag.david003@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

pll1417x is used in Exynos7885 SoC for top-level integer PLLs.
It is similar enough to pll0822x that practically the same code can
handle both. The difference that's to be noted is that when defining a
pl1417x PLL, the "con" parameter of the PLL macro should be set to the
CON1 register instead of CON3, like this:

    PLL(pll_1417x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
        PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0,
        NULL),

Signed-off-by: David Virag <virag.david003@gmail.com>
---
Changes in v2:
  - Nothing

 drivers/clk/samsung/clk-pll.c | 1 +
 drivers/clk/samsung/clk-pll.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 83d1b03647db..70cdc87f714e 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -1476,6 +1476,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 		else
 			init.ops = &samsung_pll35xx_clk_ops;
 		break;
+	case pll_1417x:
 	case pll_0822x:
 		pll->enable_offs = PLL0822X_ENABLE_SHIFT;
 		pll->lock_offs = PLL0822X_LOCK_STAT_SHIFT;
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index a739f2b7ae80..c83a20195f6d 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -32,6 +32,7 @@ enum samsung_pll_type {
 	pll_2550xx,
 	pll_2650x,
 	pll_2650xx,
+	pll_1417x,
 	pll_1450x,
 	pll_1451x,
 	pll_1452x,
-- 
2.34.1