Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965355AbXATTfn (ORCPT ); Sat, 20 Jan 2007 14:35:43 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965360AbXATTfn (ORCPT ); Sat, 20 Jan 2007 14:35:43 -0500 Received: from ms-smtp-01.nyroc.rr.com ([24.24.2.55]:39158 "EHLO ms-smtp-01.nyroc.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965355AbXATTfl (ORCPT ); Sat, 20 Jan 2007 14:35:41 -0500 Message-ID: <023c01c73cca$20bc2510$84163e05@kroptech.com> From: "Adam Kropelin" To: Cc: "Auke Kok" , Subject: Re: MSI failure on nForce 430 (WAS: intel 82571EB gigabit fails to see link on 2.6.20-rc5 in-tree e1000 driver (regression)) Date: Sat, 20 Jan 2007 14:35:23 -0500 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0239_01C73CA0.37D7C530" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3028 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.3028 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 47255 Lines: 1003 This is a multi-part message in MIME format. ------=_NextPart_000_0239_01C73CA0.37D7C530 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=response Content-Transfer-Encoding: 7bit Adam Kropelin wrote: > I've attached the contents dmesg, 'lspci -vvv', and 'cat > /proc/interrupts' from 2.6.20-rc5. Actually attached this time. --Adam ------=_NextPart_000_0239_01C73CA0.37D7C530 Content-Type: application/octet-stream; name="proc-irq-2.6.20-rc5" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="proc-irq-2.6.20-rc5" CPU0 CPU1 =0A= 0: 80667031 398973 XT-PIC-XT timer=0A= 1: 2 0 IO-APIC-edge i8042=0A= 6: 5 0 IO-APIC-edge floppy=0A= 8: 1 0 IO-APIC-edge rtc=0A= 9: 0 0 IO-APIC-fasteoi acpi=0A= 12: 7 0 IO-APIC-edge i8042=0A= 19: 10264 0 IO-APIC-fasteoi eth0=0A= 20: 0 0 IO-APIC-fasteoi libata=0A= 21: 933830 0 IO-APIC-fasteoi libata=0A= 22: 2 0 IO-APIC-fasteoi ehci_hcd:usb2=0A= 23: 1754 0 IO-APIC-fasteoi ohci_hcd:usb1, HDA Intel=0A= 8412: 0 0 PCI-MSI-edge eth1=0A= NMI: 1756 1254 =0A= LOC: 81066172 81066123 =0A= ERR: 0=0A= ------=_NextPart_000_0239_01C73CA0.37D7C530 Content-Type: application/octet-stream; name="dmesg-2.6.20-rc5" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg-2.6.20-rc5" Linux version 2.6.20-rc5 (adk0212@devbox3) (gcc version 4.1.1 20061011 = (Red Hat 4.1.1-30)) #1 SMP Sun Jan 14 13:14:52 EST 2007=0A= Command line: ro root=3D/dev/sda3=0A= BIOS-provided physical RAM map:=0A= BIOS-e820: 0000000000000000 - 000000000009f000 (usable)=0A= BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)=0A= BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)=0A= BIOS-e820: 0000000000100000 - 000000003bee0000 (usable)=0A= BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS)=0A= BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data)=0A= BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved)=0A= BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)=0A= BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)=0A= BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)=0A= Entering add_active_range(0, 0, 159) 0 entries of 3200 used=0A= Entering add_active_range(0, 256, 245472) 1 entries of 3200 used=0A= end_pfn_map =3D 1048576=0A= DMI 2.4 present.=0A= ACPI: RSDP (v000 DELL ) @ = 0x00000000000f83d0=0A= ACPI: RSDT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ = 0x000000003bee3040=0A= ACPI: FADT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ = 0x000000003bee3100=0A= ACPI: BOOT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ = 0x000000003bee8b40=0A= ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ = 0x000000003bee8c80=0A= ACPI: HPET (v001 DELL bMk 0x42302e31 AWRD 0x00000098) @ = 0x000000003bee8ec0=0A= ACPI: MCFG (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ = 0x000000003bee8f40=0A= ACPI: SLIC (v001 DELL bMk 0x42302e31 AWRD 0x0100000e) @ = 0x000000003bee8fc0=0A= ACPI: MADT (v001 DELL bMk 0x42302e31 AWRD 0x00000000) @ = 0x000000003bee8bc0=0A= ACPI: DSDT (v001 DELL BMK 0x00001000 MSFT 0x0100000e) @ = 0x0000000000000000=0A= Scanning NUMA topology in Northbridge 24=0A= Number of nodes 1=0A= Node 0 MemBase 0000000000000000 Limit 000000003bee0000=0A= Entering add_active_range(0, 0, 159) 0 entries of 3200 used=0A= Entering add_active_range(0, 256, 245472) 1 entries of 3200 used=0A= NUMA: Using 63 for the hash shift.=0A= Using node hash shift of 63=0A= Bootmem setup node 0 0000000000000000-000000003bee0000=0A= Zone PFN ranges:=0A= DMA 0 -> 4096=0A= DMA32 4096 -> 1048576=0A= Normal 1048576 -> 1048576=0A= early_node_map[2] active PFN ranges=0A= 0: 0 -> 159=0A= 0: 256 -> 245472=0A= On node 0 totalpages: 245375=0A= DMA zone: 56 pages used for memmap=0A= DMA zone: 24 pages reserved=0A= DMA zone: 3919 pages, LIFO batch:0=0A= DMA32 zone: 3300 pages used for memmap=0A= DMA32 zone: 238076 pages, LIFO batch:31=0A= Normal zone: 0 pages used for memmap=0A= ACPI: PM-Timer IO Port: 0x1008=0A= ACPI: Local APIC address 0xfee00000=0A= ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)=0A= Processor #0 (Bootup-CPU)=0A= ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)=0A= Processor #1=0A= ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])=0A= ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])=0A= ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])=0A= IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)=0A= ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)=0A= ACPI: IRQ9 used by override.=0A= ACPI: IRQ14 used by override.=0A= ACPI: IRQ15 used by override.=0A= Setting APIC routing to physical flat=0A= ACPI: HPET id: 0x10b9a201 base: 0xfeff0000=0A= Using ACPI (MADT) for SMP configuration information=0A= Nosave address range: 000000000009f000 - 00000000000a0000=0A= Nosave address range: 00000000000a0000 - 00000000000f0000=0A= Nosave address range: 00000000000f0000 - 0000000000100000=0A= Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)=0A= SMP: Allowing 2 CPUs, 0 hotplug CPUs=0A= PERCPU: Allocating 67136 bytes of per cpu data=0A= Built 1 zonelists. Total pages: 241995=0A= Kernel command line: ro root=3D/dev/sda3=0A= Initializing CPU#0=0A= PID hash table entries: 4096 (order: 12, 32768 bytes)=0A= Console: colour VGA+ 80x25=0A= Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)=0A= Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)=0A= Checking aperture...=0A= CPU 0: aperture @ 98c4000000 size 32 MB=0A= Aperture too small (32 MB)=0A= No AGP bridge found=0A= Memory: 956760k/981888k available (2490k kernel code, 24740k reserved, = 1267k data, 344k init)=0A= Calibrating delay using timer specific routine.. 4012.35 BogoMIPS = (lpj=3D2006179)=0A= Security Framework v1.0.0 initialized=0A= SELinux: Initializing.=0A= SELinux: Starting in permissive mode=0A= selinux_register_security: Registering secondary module capability=0A= Capability LSM initialized as secondary=0A= Mount-cache hash table entries: 256=0A= CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)=0A= CPU: L2 Cache: 512K (64 bytes/line)=0A= CPU 0/0 -> Node 0=0A= CPU: Physical Processor ID: 0=0A= CPU: Processor Core ID: 0=0A= SMP alternatives: switching to UP code=0A= ACPI: Core revision 20060707=0A= ..MP-BIOS bug: 8254 timer not connected to IO-APIC=0A= Using local APIC timer interrupts.=0A= result 12526135=0A= Detected 12.526 MHz APIC timer.=0A= SMP alternatives: switching to SMP code=0A= Booting processor 1/2 APIC 0x1=0A= Initializing CPU#1=0A= Calibrating delay using timer specific routine.. 4013.92 BogoMIPS = (lpj=3D2006961)=0A= CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)=0A= CPU: L2 Cache: 512K (64 bytes/line)=0A= CPU 1/1 -> Node 0=0A= CPU: Physical Processor ID: 0=0A= CPU: Processor Core ID: 1=0A= AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02=0A= CPU 1: Syncing TSC to CPU 0.=0A= CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 491 = cycles)=0A= Brought up 2 CPUs=0A= testing NMI watchdog ... OK.=0A= time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer.=0A= time.c: Detected 2004.179 MHz processor.=0A= migration_cost=3D327=0A= NET: Registered protocol family 16=0A= No dock devices found.=0A= ACPI: bus type pci registered=0A= PCI: Using MMCONFIG at f0000000=0A= PCI: No mmconfig possible on device 00:18=0A= ACPI: Interpreter enabled=0A= ACPI: Using IOAPIC for interrupt routing=0A= ACPI: PCI Root Bridge [PCI0] (0000:00)=0A= PCI: Probing PCI hardware (bus 00)=0A= Boot video device is 0000:00:05.0=0A= PCI: Transparent bridge - 0000:00:10.0=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]=0A= ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]=0A= ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)=0A= ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LNK6] (IRQs 5 *7 9 10 11 14 15)=0A= ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)=0A= ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 *15)=0A= ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)=0A= ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)=0A= ACPI: PCI Interrupt Link [LPMU] (IRQs 5 *7 9 10 11 14 15)=0A= ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)=0A= ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)=0A= ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.=0A= ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)=0A= ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)=0A= ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.=0A= ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.=0A= ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.=0A= ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.=0A= ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.=0A= ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.=0A= ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.=0A= ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.=0A= ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.=0A= Linux Plug and Play Support v0.97 (c) Adam Belay=0A= pnp: PnP ACPI init=0A= pnp: PnP ACPI: found 10 devices=0A= SCSI subsystem initialized=0A= libata version 2.00 loaded.=0A= usbcore: registered new interface driver usbfs=0A= usbcore: registered new interface driver hub=0A= usbcore: registered new device driver usb=0A= PCI: Using ACPI for IRQ routing=0A= PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post = a report=0A= NetLabel: Initializing=0A= NetLabel: domain hash size =3D 128=0A= NetLabel: protocols =3D UNLABELED CIPSOv4=0A= NetLabel: unlabeled traffic allowed by default=0A= hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31=0A= hpet0: 3 32-bit timers, 25000000 Hz=0A= pnp: 00:01: ioport range 0x1000-0x107f could not be reserved=0A= pnp: 00:01: ioport range 0x1080-0x10ff has been reserved=0A= pnp: 00:01: ioport range 0x1400-0x147f has been reserved=0A= pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved=0A= pnp: 00:01: ioport range 0x1800-0x187f has been reserved=0A= pnp: 00:01: ioport range 0x1880-0x18ff has been reserved=0A= pnp: 00:01: ioport range 0x2000-0x207f has been reserved=0A= pnp: 00:01: ioport range 0x2080-0x20ff has been reserved=0A= PCI: Bridge: 0000:00:02.0=0A= IO window: a000-afff=0A= MEM window: fd800000-fd8fffff=0A= PREFETCH window: fd700000-fd7fffff=0A= PCI: Bridge: 0000:00:03.0=0A= IO window: 8000-8fff=0A= MEM window: fde00000-fdefffff=0A= PREFETCH window: fdd00000-fddfffff=0A= PCI: Bridge: 0000:00:04.0=0A= IO window: b000-bfff=0A= MEM window: fdc00000-fdcfffff=0A= PREFETCH window: fd900000-fd9fffff=0A= PCI: Bridge: 0000:00:10.0=0A= IO window: 9000-9fff=0A= MEM window: fdb00000-fdbfffff=0A= PREFETCH window: fda00000-fdafffff=0A= PCI: Setting latency timer of device 0000:00:02.0 to 64=0A= PCI: Setting latency timer of device 0000:00:03.0 to 64=0A= PCI: Setting latency timer of device 0000:00:04.0 to 64=0A= PCI: Setting latency timer of device 0000:00:10.0 to 64=0A= NET: Registered protocol family 2=0A= IP route cache hash table entries: 32768 (order: 6, 262144 bytes)=0A= TCP established hash table entries: 131072 (order: 9, 2097152 bytes)=0A= TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)=0A= TCP: Hash tables configured (established 131072 bind 65536)=0A= TCP reno registered=0A= checking if image is initramfs... it is=0A= Freeing initrd memory: 1394k freed=0A= Simple Boot Flag at 0x3a set to 0x80=0A= audit: initializing netlink socket (disabled)=0A= audit(1169166083.495:1): initialized=0A= Total HugeTLB memory allocated, 0=0A= VFS: Disk quotas dquot_6.5.1=0A= Dquot-cache hash table entries: 512 (order 0, 4096 bytes)=0A= SELinux: Registering netfilter hooks=0A= io scheduler noop registered=0A= io scheduler anticipatory registered=0A= io scheduler deadline registered=0A= io scheduler cfq registered (default)=0A= PCI: Setting latency timer of device 0000:00:02.0 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:02.0:pcie00]=0A= Allocate Port Service[0000:00:02.0:pcie03]=0A= PCI: Setting latency timer of device 0000:00:03.0 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:03.0:pcie00]=0A= Allocate Port Service[0000:00:03.0:pcie03]=0A= PCI: Setting latency timer of device 0000:00:04.0 to 64=0A= assign_interrupt_mode Found MSI capability=0A= Allocate Port Service[0000:00:04.0:pcie00]=0A= Allocate Port Service[0000:00:04.0:pcie03]=0A= pci_hotplug: PCI Hot Plug PCI Core version: 0.5=0A= Real Time Clock Driver v1.12ac=0A= Non-volatile memory driver v1.2=0A= Linux agpgart interface v0.101 (c) Dave Jones=0A= Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled=0A= RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize=0A= b44.c:v1.01 (Jun 16, 2006)=0A= ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19=0A= ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [APC4] -> GSI 19 (level, = low) -> IRQ 19=0A= PCI: Setting latency timer of device 0000:04:07.0 to 64=0A= eth0: Broadcom 4400 10/100BaseT Ethernet 00:18:8b:59:50:15=0A= netconsole: not configured, aborting=0A= Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2=0A= ide: Assuming 33MHz system bus speed for PIO modes; override with = idebus=3Dxx=0A= Probing IDE interface ide0...=0A= Probing IDE interface ide1...=0A= ide-floppy driver 0.99.newide=0A= usbcore: registered new interface driver libusual=0A= usbcore: registered new interface driver hiddev=0A= usbcore: registered new interface driver usbhid=0A= drivers/usb/input/hid-core.c: v2.6:USB HID core driver=0A= PNP: No PS/2 controller found. Probing ports directly.=0A= serio: i8042 KBD port at 0x60,0x64 irq 1=0A= serio: i8042 AUX port at 0x60,0x64 irq 12=0A= mice: PS/2 mouse device common for all mice=0A= TCP bic registered=0A= Initializing XFRM netlink socket=0A= NET: Registered protocol family 1=0A= NET: Registered protocol family 17=0A= powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ = processors (version 2.00.00)=0A= powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc=0A= powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe=0A= powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12=0A= ACPI: (supports S0 S1 S3 S4 S5)=0A= Freeing unused kernel memory: 344k freed=0A= Write protecting the kernel read-only data: 803k=0A= USB Universal Host Controller Interface driver v3.0=0A= ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver = (PCI)=0A= ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23=0A= ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, = low) -> IRQ 23=0A= PCI: Setting latency timer of device 0000:00:0b.0 to 64=0A= ohci_hcd 0000:00:0b.0: OHCI Host Controller=0A= ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1=0A= ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000=0A= usb usb1: configuration #1 chosen from 1 choice=0A= hub 1-0:1.0: USB hub found=0A= hub 1-0:1.0: 8 ports detected=0A= ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22=0A= ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, = low) -> IRQ 22=0A= PCI: Setting latency timer of device 0000:00:0b.1 to 64=0A= ehci_hcd 0000:00:0b.1: EHCI Host Controller=0A= ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2=0A= ehci_hcd 0000:00:0b.1: debug port 1=0A= PCI: cache line size of 64 is not supported by device 0000:00:0b.1=0A= ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000=0A= ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004=0A= usb usb2: configuration #1 chosen from 1 choice=0A= hub 2-0:1.0: USB hub found=0A= hub 2-0:1.0: 8 ports detected=0A= sata_nv 0000:00:0e.0: version 3.2=0A= ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21=0A= ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, = low) -> IRQ 21=0A= PCI: Setting latency timer of device 0000:00:0e.0 to 64=0A= ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 21=0A= ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 21=0A= scsi0 : sata_nv=0A= usb 1-4: new low speed USB device using ohci_hcd and address 2=0A= ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A= ata1.00: ATA-7, max UDMA/133, 312500000 sectors: LBA48 NCQ (depth 0/32)=0A= ata1.00: ata1: dev 0 multi count 16=0A= ata1.00: configured for UDMA/133=0A= scsi1 : sata_nv=0A= usb 1-4: configuration #1 chosen from 1 choice=0A= input: Avocent AutoView 400 as /class/input/input0=0A= input: USB HID v1.10 Keyboard [Avocent AutoView 400] on = usb-0000:00:0b.0-4=0A= input: Avocent AutoView 400 as /class/input/input1=0A= input: USB HID v1.10 Mouse [Avocent AutoView 400] on usb-0000:00:0b.0-4=0A= ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)=0A= ata2.00: ATAPI, max UDMA/100=0A= ata2.00: configured for UDMA/100=0A= scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AD PQ: 0 = ANSI: 5=0A= SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)=0A= sda: Write Protect is off=0A= sda: Mode Sense: 00 3a 00 00=0A= SCSI device sda: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)=0A= sda: Write Protect is off=0A= sda: Mode Sense: 00 3a 00 00=0A= SCSI device sda: write cache: enabled, read cache: enabled, doesn't = support DPO or FUA=0A= sda: sda1 sda2 sda3=0A= sd 0:0:0:0: Attached scsi disk sda=0A= scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH10N 0D04 PQ: 0 = ANSI: 5=0A= ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20=0A= ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, = low) -> IRQ 20=0A= PCI: Setting latency timer of device 0000:00:0f.0 to 64=0A= ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 20=0A= ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 20=0A= scsi2 : sata_nv=0A= ata3: SATA link down (SStatus 0 SControl 300)=0A= ATA: abnormal status 0x7F on port 0x9E7=0A= scsi3 : sata_nv=0A= ata4: SATA link down (SStatus 0 SControl 300)=0A= ATA: abnormal status 0x7F on port 0x967=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= SELinux: Disabled at runtime.=0A= SELinux: Unregistering netfilter hooks=0A= audit(1169166087.531:2): selinux=3D0 auid=3D4294967295=0A= Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI=0A= Copyright (c) 1999-2006 Intel Corporation.=0A= ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16=0A= ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC6] -> GSI 16 (level, = low) -> IRQ 16=0A= PCI: Setting latency timer of device 0000:01:00.0 to 64=0A= e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) = 00:15:17:12:c4:17=0A= e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection=0A= i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00=0A= i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40=0A= input: PC Speaker as /class/input/input2=0A= shpchp: Standard Hot Plug PCI Controller Driver version: 0.4=0A= sd 0:0:0:0: Attached scsi generic sg0 type 0=0A= scsi 1:0:0:0: Attached scsi generic sg1 type 5=0A= Floppy drive(s): fd0 is 1.44M=0A= FDC 0 is a post-1991 82077=0A= sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray=0A= Uniform CD-ROM driver Revision: 3.20=0A= sr 1:0:0:0: Attached scsi CD-ROM sr0=0A= ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23=0A= ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 23 (level, = low) -> IRQ 23=0A= PCI: Setting latency timer of device 0000:00:10.1 to 64=0A= lp: driver loaded but no devices found=0A= input: Power Button (FF) as /class/input/input3=0A= ACPI: Power Button (FF) [PWRF]=0A= input: Power Button (CM) as /class/input/input4=0A= ACPI: Power Button (CM) [PWRB]=0A= ibm_acpi: ec object not found=0A= md: Autodetecting RAID arrays.=0A= md: autorun ...=0A= md: ... autorun DONE.=0A= device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: = dm-devel@redhat.com=0A= EXT3 FS on sda3, internal journal=0A= kjournald starting. Commit interval 5 seconds=0A= EXT3 FS on sda1, internal journal=0A= EXT3-fs: mounted filesystem with ordered data mode.=0A= Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k=0A= NET: Registered protocol family 10=0A= lo: Disabled Privacy Extensions=0A= process `sysctl' is using deprecated sysctl (syscall) = net.ipv6.neigh.lo.base_reachable_time; Use = net.ipv6.neigh.lo.base_reachable_time_ms instead.=0A= ADDRCONF(NETDEV_UP): eth0: link is not ready=0A= b44: eth0: Link is up at 100 Mbps, full duplex.=0A= b44: eth0: Flow control is off for TX and off for RX.=0A= ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready=0A= ADDRCONF(NETDEV_UP): eth1: link is not ready=0A= audit(1169166107.318:3): audit_pid=3D1926 old=3D0 by auid=3D4294967295=0A= irqbalance[1952]: segfault at 00005555557ca3f8 rip 0000555555555979 rsp = 00007fff932b5ac0 error 6=0A= Bluetooth: Core ver 2.11=0A= NET: Registered protocol family 31=0A= Bluetooth: HCI device and connection manager initialized=0A= Bluetooth: HCI socket layer initialized=0A= Bluetooth: L2CAP ver 2.8=0A= Bluetooth: L2CAP socket layer initialized=0A= Bluetooth: RFCOMM socket layer initialized=0A= Bluetooth: RFCOMM TTY layer initialized=0A= Bluetooth: RFCOMM ver 1.8=0A= Bluetooth: HIDP (Human Interface Emulation) ver 1.1=0A= eth0: no IPv6 routers present=0A= ------=_NextPart_000_0239_01C73CA0.37D7C530 Content-Type: application/octet-stream; name="lspci-2.6.20-rc5" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="lspci-2.6.20-rc5" 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)=0A= Subsystem: nVidia Corporation C51 Host Bridge=0A= Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- TAbort- = SERR+ TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = Reset- FastB2B-=0A= Capabilities: [40] #0d [0000]=0A= Capabilities: [48] Power Management version 2=0A= Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0+,D1+,D2+,D3hot+,D3cold+)=0A= Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-=0A= Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=3D0/1 = Enable+=0A= Address: 00000000fee00000 Data: 4039=0A= Capabilities: [60] HyperTransport: MSI Mapping=0A= Capabilities: [80] Express Root Port (Slot+) IRQ 0=0A= Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-=0A= Device: Latency L0s <512ns, L1 <4us=0A= Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+=0A= Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+=0A= Device: MaxPayload 128 bytes, MaxReadReq 512 bytes=0A= Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2=0A= Link: Latency L0s <512ns, L1 <4us=0A= Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-=0A= Link: Speed 2.5Gb/s, Width x1=0A= Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-=0A= Slot: Number 0, PowerLimit 0.000000=0A= Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-=0A= Slot: AttnInd Off, PwrInd On, Power-=0A= Root: Correctable- Non-Fatal- Fatal- PME-=0A= Capabilities: [100] Virtual Channel=0A= =0A= 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) = (prog-if 00 [Normal decode])=0A= Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- TAbort- = Reset- FastB2B-=0A= Capabilities: [40] #0d [0000]=0A= Capabilities: [48] Power Management version 2=0A= Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0+,D1+,D2+,D3hot+,D3cold+)=0A= Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-=0A= Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=3D0/1 = Enable+=0A= Address: 00000000fee00000 Data: 4041=0A= Capabilities: [60] HyperTransport: MSI Mapping=0A= Capabilities: [80] Express Root Port (Slot+) IRQ 0=0A= Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-=0A= Device: Latency L0s <512ns, L1 <4us=0A= Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+=0A= Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+=0A= Device: MaxPayload 128 bytes, MaxReadReq 512 bytes=0A= Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1=0A= Link: Latency L0s <512ns, L1 <4us=0A= Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-=0A= Link: Speed 2.5Gb/s, Width x1=0A= Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-=0A= Slot: Number 0, PowerLimit 0.000000=0A= Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-=0A= Slot: AttnInd Off, PwrInd On, Power-=0A= Root: Correctable- Non-Fatal- Fatal- PME-=0A= Capabilities: [100] Virtual Channel=0A= =0A= 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) = (prog-if 00 [Normal decode])=0A= Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- TAbort- = Reset- FastB2B-=0A= Capabilities: [40] #0d [0000]=0A= Capabilities: [48] Power Management version 2=0A= Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA = PME(D0+,D1+,D2+,D3hot+,D3cold+)=0A= Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-=0A= Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=3D0/1 = Enable+=0A= Address: 00000000fee00000 Data: 4049=0A= Capabilities: [60] HyperTransport: MSI Mapping=0A= Capabilities: [80] Express Root Port (Slot+) IRQ 0=0A= Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-=0A= Device: Latency L0s <512ns, L1 <4us=0A= Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+=0A= Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+=0A= Device: MaxPayload 128 bytes, MaxReadReq 512 bytes=0A= Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0=0A= Link: Latency L0s <512ns, L1 <4us=0A= Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-=0A= Link: Speed 2.5Gb/s, Width x16=0A= Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-=0A= Slot: Number 0, PowerLimit 0.000000=0A= Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-=0A= Slot: AttnInd Off, PwrInd On, Power-=0A= Root: Correctable- Non-Fatal- Fatal- PME-=0A= Capabilities: [100] Virtual Channel=0A= =0A= 00:05.0 VGA compatible controller: nVidia Corporation C51 PCI Express = Bridge (rev a2) (prog-if 00 [VGA])=0A= Subsystem: Dell Unknown device 01ed=0A= Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = Reset- FastB2B-=0A= Capabilities: [b8] #0d [0000]=0A= Capabilities: [8c] HyperTransport: MSI Mapping=0A= =0A= 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio = (rev a2)=0A= Subsystem: Dell Unknown device 01ed=0A= Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR-