Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 00BDDC433EF for ; Tue, 7 Dec 2021 09:52:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234442AbhLGJzc (ORCPT ); Tue, 7 Dec 2021 04:55:32 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35864 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232311AbhLGJzb (ORCPT ); Tue, 7 Dec 2021 04:55:31 -0500 Received: from mail-pl1-x62d.google.com (mail-pl1-x62d.google.com [IPv6:2607:f8b0:4864:20::62d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5FED8C061574; Tue, 7 Dec 2021 01:52:01 -0800 (PST) Received: by mail-pl1-x62d.google.com with SMTP id n8so9059984plf.4; Tue, 07 Dec 2021 01:52:01 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=7FOxtJIlEMirXsbVrr+a4ML5vPiKhQ34IbjqLyOK5xk=; b=Y2rj0MM1AfFLu43mrZjN3gjj4wC8IRphf5TGgAq7J9CyOeyObmQfAraKGe8eDBPH0a P514aJCNCWjdomQ6Y6vJg/2k+tjnI4WUHvHDnBdoYs9yx02Yb+LVh0jRIkJsd/rzM0Pg k4mNur1Vi2Y3bCIUiT5ycNbmaQYWG+0Znh+mk1yoVRzCb8LnN0do4D5hOW/pFdvUmxu2 HyKvH1DKwn52zraTGHoU1itUU+cQ/CAyAoYQeQAdASQH/VjDrQ1uz8jtismlJP1uF0ZJ 9Xcvv7jzFsu20tYfpzzccyDAssZ5MqX5HipPIagc1hSkm+wKBozu9bP7LSdqawXO1YUD 4yFA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=7FOxtJIlEMirXsbVrr+a4ML5vPiKhQ34IbjqLyOK5xk=; b=kwifREbewCUmMYiVOD+T7BF8wGvgFneRnVtcqsa0EoEolPt5VhjLpKyVPFKrC6i3Ay v1xg1+Hp0czimiwTj3e+4z2Ol+V5XYOyLAZzIqt+kuvuDzkHb0FWwA6FTF2ETpgmPeIb 6Nk7qjtZIEeEBDb3bbJPxJmafWMk7HCxr39WEJ3Mh1wF7tfMhTburMnvVjZyp9lT2Bx7 02GppUdKIcY/X3orhfEzPUNeE4yTOGIy7rwo372lgqW9mL2AkLgrKMT6ZIW84HCoyuNO gizBSNpaCSp6r506+DCTNSc4QFjEvYAVRBq2aoUT08VbGHgG6AF7XgN+RkinaB9I6XfY xHEw== X-Gm-Message-State: AOAM530k1pJEtFL9WdkQYtheFrswKNu6CnsCSPUCqiQoEfxJo8JF8pRI WsWpzIOgTgTpMJZetp3RAr4= X-Google-Smtp-Source: ABdhPJxPeg4shx1AEkBpZSCajYwv0FKmrVv3kcqUzCDXy07GHUqsg7mULcR1+xn98OtSpoiQfV+3sw== X-Received: by 2002:a17:90a:e613:: with SMTP id j19mr5405986pjy.182.1638870720790; Tue, 07 Dec 2021 01:52:00 -0800 (PST) Received: from howard-System-Product-Name.dhcpserver.bu9bmc.local (125-228-123-29.hinet-ip.hinet.net. [125.228.123.29]) by smtp.gmail.com with ESMTPSA id 12sm2178294pjn.16.2021.12.07.01.51.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 07 Dec 2021 01:52:00 -0800 (PST) From: Howard Chiu X-Google-Original-From: Howard Chiu To: robh+dt@kernel.org, joel@jms.id.au, andrew@aj.id.au, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, patrick@stwcx.xyz, Potin.Lai@quantatw.com Cc: Howard Chiu Subject: [PATCH v8] ARM: dts: aspeed: Adding Facebook Bletchley BMC Date: Tue, 7 Dec 2021 17:49:24 +0800 Message-Id: <20211207094923.422422-1-howard.chiu@quantatw.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Initial introduction of Facebook Bletchley equipped with Aspeed 2600 BMC SoC. Signed-off-by: Howard Chiu --- Change since v7: - Add switchphy mode back due to unknown failure Change since v6: - Fix FUSB302 node warnings - Remove switchphy node. - Remvoe status property from spi-gpio node - Remove interrupt pin of FUSB302 temporally due to hardware issue - Add more gpio-line-name - Replace MP5023 device drivr with "mps,mp5023" Change since v5: - Add an EEPROM on i2c-7 - Change address of FUSB302 to 0x22 - Assign interrupt pin to FUSB302 - Rework pin assignment of pca9539 Change since v4: - Change address of TMP421 on i2c-12 to 0x4d Change since v3: - Add a TMP421 on i2c-10 Change since v2: - Remove uart5 workaround - Remove gpio nodes of pca9552/pca9539 - Modify gpio-line-name of led/power/presence pins with openbmc pattern - Add MP5023 devices Change since v1: - Keep sorted in Makefile - Change baudrate to 57600 from 115200 - Rename node *-ember to *-amber - Use openbmc-flash-layout-128.dtsi arch/arm/boot/dts/Makefile | 1 + .../dts/aspeed-bmc-facebook-bletchley.dts | 756 ++++++++++++++++++ 2 files changed, 757 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..b804b577010a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1482,6 +1482,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-bytedance-g220a.dtb \ + aspeed-bmc-facebook-bletchley.dtb \ aspeed-bmc-facebook-cloudripper.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts new file mode 100644 index 000000000000..f973ea883b97 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -0,0 +1,756 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include +#include + +/ { + model = "Facebook Bletchley BMC"; + compatible = "facebook,bletchley-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + bootargs = "console=ttyS4,57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + tpmdev@0 { + compatible = "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + switchphy: ethernet-phy@0 { + // Fixed link + }; + + leds { + compatible = "gpio-leds"; + + sys_log_id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>; + }; + fan0_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>; + }; + fan1_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>; + }; + fan2_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>; + }; + fan3_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>; + }; + fan0_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>; + }; + fan1_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>; + }; + fan2_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>; + }; + fan3_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>; + }; + sled0_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>; + }; + sled0_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>; + }; + sled1_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>; + }; + sled1_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>; + }; + sled2_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>; + }; + sled2_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>; + }; + sled3_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>; + }; + sled3_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>; + }; + sled4_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>; + }; + sled4_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>; + }; + sled5_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>; + }; + sled5_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&switchphy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&rtc { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&i2c0 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled0_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT", + "SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT", + "SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY", + "SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0"; + }; + + sled0_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled0_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c1 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled1_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", + "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", + "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", + "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; + }; + + sled1_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled1_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled2_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT", + "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT", + "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY", + "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2"; + }; + + sled2_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled2_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c3 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled3_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT", + "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT", + "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY", + "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3"; + }; + + sled3_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled3_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c4 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled4_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT", + "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT", + "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY", + "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4"; + }; + + sled4_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled4_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c5 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled5_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT", + "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT", + "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY", + "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5"; + }; + + sled5_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled5_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c10 { + status = "okay"; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + hdc1080@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + front_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-fault-identify","power-p5v-stby-good", + "power-p1v0-dvdd-good","power-p1v0-avdd-good", + "","","","", + "","","","", + "","","",""; + }; +}; + +&i2c12 { + status = "okay"; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + }; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + tmp421@4d { + compatible = "ti,tmp421"; + reg = <0x4d>; + }; + + fan_ioexp: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-fan0","presence-fan1", + "presence-fan2","presence-fan3", + "power-fan0-good","power-fan1-good", + "power-fan2-good","power-fan3-good", + "","","","", + "","","",""; + }; +}; + +&i2c13 { + multi-master; + aspeed,hw-timeout-ms = <1000>; + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","SEL_SPI2_MUX","SPI2_MUX1", + "SPI2_MUX2","SPI2_MUX3","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","", + /*H0-H7*/ "presence-riser1","presence-riser2", + "presence-sled0","presence-sled1", + "presence-sled2","presence-sled3", + "presence-sled4","presence-sled5", + /*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2", + "","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "ALERT_SLED0","ALERT_SLED1", + "ALERT_SLED2","ALERT_SLED3", + "ALERT_SLED4","ALERT_SLED5", + "P12V_AUX_ALERT1","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","", + "","BOARD_ID0","BOARD_ID1","BOARD_ID2", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","BAT_DETECT", + "BMC_BT_WP0","BMC_BT_WP1","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","RST_BMC_MVL","","", + "USB2_SEL0_A","USB2_SEL1_A", + "USB2_SEL0_B","USB2_SEL1_B", + /*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&adc0 { + vref = <1800>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; -- 2.25.1