Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750837AbXAVIC6 (ORCPT ); Mon, 22 Jan 2007 03:02:58 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750847AbXAVIC6 (ORCPT ); Mon, 22 Jan 2007 03:02:58 -0500 Received: from server077.de-nserver.de ([62.27.12.245]:53409 "EHLO server077.de-nserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750837AbXAVIC5 (ORCPT ); Mon, 22 Jan 2007 03:02:57 -0500 Message-ID: <45B46FA0.2060901@profihost.com> Date: Mon, 22 Jan 2007 09:02:40 +0100 From: Stefan Priebe - FH User-Agent: Thunderbird 1.5.0.9 (Windows/20061207) MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: SATA ahci Bug in 2.6.19.x Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit X-User-Auth: Auth by hostmaster@profihost.com through 84.134.23.182 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4819 Lines: 129 Hello! I've an Asus A8V Mainboard which works wonderful with a 2.6.18.X kernel. But i cannot use the SATA Controller with a 2.6.19.x Kernel. dmesg output from 2.6.18.3 where it works perfectly: libata version 2.00 loaded. ahci 0000:00:0f.0: version 2.0 GSI 19 sharing vector 0xD9 and IRQ 19 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225 ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225 ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225 ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225 scsi0 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 < sdb5 sdb6 sdb7 > sd 1:0:0:0: Attached scsi disk sdb Output with 2.6.19.2 (logged via netconsole cause the system can't boot): "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21" "ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode" "ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part " "ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277" "ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277" "ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277" "ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277" "scsi0 : ahci" "ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)" "ata1.00: qc timeout (cmd 0xec)" "ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104)" "ata1: port is slow to respond, please be patient (Status 0x80)" "ata1: port failed to respond (30 secs, Status 0x80)" "ata1: COMRESET failed (device not ready)" "ata1: hardreset failed, retrying in 5 secs" "ata1: port is slow to respond, please be patient (Status 0x80)" "ata1: port failed to respond (30 secs, Status 0x80)" "ata1: COMRESET failed (device not ready)" "ata1: hardreset failed, retrying in 5 secs" "ata1: port is slow to respond, please be patient (Status 0x80)" "ata1: port failed to respond (30 secs, Status 0x80)" "ata1: COMRESET failed (device not ready)" "ata1: reset failed, giving up" "scsi1 : ahci" "ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)" "ata2.00: qc timeout (cmd 0xec)" "ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)" "ata2: port is slow to respond, please be patient (Status 0x80)" "ata2: port failed to respond (30 secs, Status 0x80)" "ata2: COMRESET failed (device not ready)" "ata2: hardreset failed, retrying in 5 secs" "ata2: port is slow to respond, please be patient (Status 0x80)" "ata2: port failed to respond (30 secs, Status 0x80)" "ata2: COMRESET failed (device not ready)" "ata2: hardreset failed, retrying in 5 secs" "ata2: port is slow to respond, please be patient (Status 0x80)" "ata2: port failed to respond (30 secs, Status 0x80)" "ata2: COMRESET failed (device not ready)" "ata2: reset failed, giving up" "scsi2 : ahci" "ata3: SATA link down (SStatus 0 SControl 300)" "scsi3 : ahci" "ata4: SATA link down (SStatus 0 SControl 300)" Stefan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/