IronPort-SDR: 95x4FUykj2nnJ0x2vtVb+J2cFCtZF1gxDQlLBLRgidQzXtkdDGK1RveRW0TWheTcDrm6XQiIiv
 peLlmjAohSm4cmiqgnEZs1R5nXL+yCaHRK69EisG55IdolxwgqN8dC3aIDMamc1gK6/0kvZCEJ
 VLC1lVJW9vo0hQHG35fI1OC4V2Aigta9vDqWdjrbuTMvJsEQCmAcQnciGyv5RDGfnyOKZswavZ
 9avFY1Y3ZYgl1rArb2yJIYE/wTVebo0y+ea3MixU2KsC4YHpiOy13Xs/tNsrU1ofegbcr3ZVuP
 CO5wHWbtvcShsLnuYyx/09k1
Subject: Re: [PATCH] ARM: dts: at91: sama5d2_xplained: remove
 PA11__SDMMC0_VDDSEL from pinctrl
To:     Eugen Hristev - M18282 <Eugen.Hristev@microchip.com>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
CC:     "alexandre.belloni@bootlin.com" <alexandre.belloni@bootlin.com>,
        "Ludovic Desroches - M43218" <Ludovic.Desroches@microchip.com>,
        "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Mihai Sain - M19926 <Mihai.Sain@microchip.com>
References: <20211026132034.678655-1-eugen.hristev@microchip.com>
 <28f0898c-0d6c-a77e-4068-b49c6dd0aa64@microchip.com>
 <f943539b-bc95-35c9-a634-ad75f9df54b0@microchip.com>
From:   Nicolas Ferre <nicolas.ferre@microchip.com>
Organization: microchip
Message-ID: <ff254ab5-1d57-3aea-1232-4f26766eeb62@microchip.com>
Date:   Wed, 8 Dec 2021 14:06:26 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.11.0
MIME-Version: 1.0
In-Reply-To: <f943539b-bc95-35c9-a634-ad75f9df54b0@microchip.com>
Content-Type: text/plain; charset="windows-1252"; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 08/12/2021 at 12:27, Eugen Hristev - M18282 wrote:
> On 12/8/21 1:22 PM, Nicolas Ferre wrote:
>> On 26/10/2021 at 15:20, Eugen Hristev wrote:
>>> From: Mihai Sain <mihai.sain@microchip.com>
>>>
>>> I/O voltage for eMMC is always 3.3V because PA11__SDMMC0_VDDSEL is
>>> tied with 10K resistor to GND. U13 switch S1 is always selected as
>>> voltage rail of 3.3V for VCCQ power pin from MPU controller and eMMC
>>> flash.
>>> Removing PA11 from pinctrl because it remains unused.
>>>
>>> Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
>>
>> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> 
> You can also add my
> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
> 
> and also
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> because I sent the patch.

Sure Eugen: Done. Best regards,
   Nicolas

>>> ---
>>>  ? arch/arm/boot/dts/at91-sama5d2_xplained.dts | 5 ++---
>>>  ? 1 file changed, 2 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>>> b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>>> index b1e854f658de..9bf2ec0ba3e2 100644
>>> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>>> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>>> @@ -66,7 +66,7 @@ sdmmc0: sdio-host@a0000000 {
>>>  ????????????? pinctrl-names = "default";
>>>  ????????????? pinctrl-0 = <&pinctrl_sdmmc0_default>;
>>>  ????????????? non-removable;
>>> -??????????? mmc-ddr-1_8v;
>>> +??????????? mmc-ddr-3_3v;
>>>  ????????????? status = "okay";
>>>  ????????? };
>>> @@ -619,10 +619,9 @@ cmd_data {
>>>  ????????????????????????? bias-disable;
>>>  ????????????????????? };
>>> -??????????????????? ck_cd_rstn_vddsel {
>>> +??????????????????? ck_cd_rstn {
>>>  ????????????????????????? pinmux = <PIN_PA0__SDMMC0_CK>,
>>>  ?????????????????????????????? <PIN_PA10__SDMMC0_RSTN>,
>>> -???????????????????????????? <PIN_PA11__SDMMC0_VDDSEL>,
>>>  ?????????????????????????????? <PIN_PA13__SDMMC0_CD>;
>>>  ????????????????????????? bias-disable;
>>>  ????????????????????? };
>>>
>>
>>
> 


-- 
Nicolas Ferre