From:   Chunfeng Yun <chunfeng.yun@mediatek.com>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC:     Chunfeng Yun <chunfeng.yun@mediatek.com>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        <linux-usb@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-mediatek@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        Eddie Hung <eddie.hung@mediatek.com>,
        Yuwen Ng <yuwen.ng@mediatek.com>
Subject: [PATCH 1/3] usb: mtu3: fix interval value for intr and isoc
Date:   Thu, 9 Dec 2021 11:14:22 +0800
Message-ID: <20211209031424.17842-1-chunfeng.yun@mediatek.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

Use the Interval value from isoc/intr endpoint descriptor, no need
minus one. But the original code doesn't cause transfer error for
normal cases, due to the interval is less than the host request.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/mtu3/mtu3_gadget.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index a9a65b4bbfed..c51be015345b 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -77,7 +77,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 		if (usb_endpoint_xfer_int(desc) ||
 				usb_endpoint_xfer_isoc(desc)) {
 			interval = desc->bInterval;
-			interval = clamp_val(interval, 1, 16) - 1;
+			interval = clamp_val(interval, 1, 16);
 			if (usb_endpoint_xfer_isoc(desc) && comp_desc)
 				mult = comp_desc->bmAttributes;
 		}
@@ -89,7 +89,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 		if (usb_endpoint_xfer_isoc(desc) ||
 				usb_endpoint_xfer_int(desc)) {
 			interval = desc->bInterval;
-			interval = clamp_val(interval, 1, 16) - 1;
+			interval = clamp_val(interval, 1, 16);
 			mult = usb_endpoint_maxp_mult(desc) - 1;
 		}
 		break;
-- 
2.18.0