From:   Nicolai Stange <nstange@suse.de>
To:     Herbert Xu <herbert@gondor.apana.org.au>,
        "David S. Miller" <davem@davemloft.net>
Cc:     =?UTF-8?q?Stephan=20M=C3=BCller?= <smueller@chronox.de>,
        Hannes Reinecke <hare@suse.de>, Torsten Duwe <duwe@suse.de>,
        Zaibo Xu <xuzaibo@huawei.com>,
        Giovanni Cabiddu <giovanni.cabiddu@intel.com>,
        David Howells <dhowells@redhat.com>,
        Jarkko Sakkinen <jarkko@kernel.org>,
        linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
        qat-linux@intel.com, keyrings@vger.kernel.org,
        Nicolai Stange <nstange@suse.de>
Subject: [PATCH v2 16/18] crypto: dh - calculate Q from P for the full public key verification
Date:   Thu,  9 Dec 2021 10:03:56 +0100
Message-Id: <20211209090358.28231-17-nstange@suse.de>
In-Reply-To: <20211209090358.28231-1-nstange@suse.de>
References: <20211209090358.28231-1-nstange@suse.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

As the ->q in struct dh_ctx gets never set anywhere, the code
in dh_is_pubkey_valid() for doing the full public key validation in
accordance to SP800-56Arev3 is effectively dead.

However, for safe-prime groups, Q = (P - 1)/2 by definition and this
enables dh_is_pubkey_valid() to calculate Q on the fly for these groups.
Implement this.

With this change, the last code accessing struct dh_ctx's ->q is now gone.
Remove this member from struct dh_ctx.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 crypto/dh.c | 40 +++++++++++++++++++++++++++++-----------
 1 file changed, 29 insertions(+), 11 deletions(-)

diff --git a/crypto/dh.c b/crypto/dh.c
index 38547c5301da..bd3ea51fbeb0 100644
--- a/crypto/dh.c
+++ b/crypto/dh.c
@@ -15,7 +15,6 @@
 struct dh_ctx {
 	enum dh_group_id group_id;
 	MPI p;	/* Value is guaranteed to be set. */
-	MPI q;	/* Value is optional. */
 	MPI g;	/* Value is guaranteed to be set. */
 	MPI xa;	/* Value is guaranteed to be set. */
 };
@@ -23,7 +22,6 @@ struct dh_ctx {
 static void dh_clear_ctx(struct dh_ctx *ctx)
 {
 	mpi_free(ctx->p);
-	mpi_free(ctx->q);
 	mpi_free(ctx->g);
 	mpi_free(ctx->xa);
 	memset(ctx, 0, sizeof(*ctx));
@@ -114,11 +112,12 @@ static int dh_set_secret(struct crypto_kpp *tfm, const void *buf,
 /*
  * SP800-56A public key verification:
  *
- * * If Q is provided as part of the domain paramenters, a full validation
- *   according to SP800-56A section 5.6.2.3.1 is performed.
+ * * For safe-prime groups, Q can be computed trivially from P and a
+ *   full validation according to SP800-56A section 5.6.2.3.1 is
+ *   performed.
  *
- * * If Q is not provided, a partial validation according to SP800-56A section
- *   5.6.2.3.2 is performed.
+ * * For all other sets of group parameters, only a partial validation
+ *   according to SP800-56A section 5.6.2.3.2 is performed.
  */
 static int dh_is_pubkey_valid(struct dh_ctx *ctx, MPI y)
 {
@@ -129,21 +128,40 @@ static int dh_is_pubkey_valid(struct dh_ctx *ctx, MPI y)
 	 * Step 1: Verify that 2 <= y <= p - 2.
 	 *
 	 * The upper limit check is actually y < p instead of y < p - 1
-	 * as the mpi_sub_ui function is yet missing.
+	 * in order to save one mpi_sub_ui() invocation here. Note that
+	 * p - 1 is the non-trivial element of the subgroup of order 2 and
+	 * thus, the check on y^q below would fail if y == p - 1.
 	 */
 	if (mpi_cmp_ui(y, 1) < 1 || mpi_cmp(y, ctx->p) >= 0)
 		return -EINVAL;
 
-	/* Step 2: Verify that 1 = y^q mod p */
-	if (ctx->q) {
-		MPI val = mpi_alloc(0);
+	/*
+	 * Step 2: Verify that 1 = y^q mod p
+	 *
+	 * For the safe-prime groups q = (p - 1)/2.
+	 */
+	if (ctx->group_id != DH_GROUP_ID_UNKNOWN) {
+		MPI val, q;
 		int ret;
 
+		val = mpi_alloc(0);
 		if (!val)
 			return -ENOMEM;
 
-		ret = mpi_powm(val, y, ctx->q, ctx->p);
+		q = mpi_alloc(mpi_get_nlimbs(ctx->p));
+		if (!q) {
+			mpi_free(val);
+			return -ENOMEM;
+		}
+
+		/*
+		 * ->p is odd, so no need to explicitly subtract one
+		 * from it before shifting to the right.
+		 */
+		mpi_rshift(q, ctx->p, 1);
 
+		ret = mpi_powm(val, y, q, ctx->p);
+		mpi_free(q);
 		if (ret) {
 			mpi_free(val);
 			return ret;
-- 
2.26.2