IronPort-SDR: Dr27Q0Aqr1naB51eowebzSme6O07Q5/fWEyx9gJw4gKlCCRfPyHSK8cZUwzVTc+JOK3dFqT4Jt
 H+ZXjzFzbjqOIbxsVNvoemWtH/hlIjCu6pElXDVRugVZoOLDSPMkSTDbfiReCBuSB8E6pcIgSy
 a/Div93VlCAWrKLOAKuq438zLm0xUIsW9/uU2Ix1O36VWpmXP0lZO4QIZtSwXebRG/NMAKtW87
 Nps+kX1A76FDP7BvKPYTiP0+gjs9uN4fUHCv3iHo+QK3vH1w7JBO94p8RtARELQusdeVe9MLrT
 iPnzGJjcm+rR/ZfyxbeIliwb
From:   Tudor Ambarus <tudor.ambarus@microchip.com>
To:     <p.yadav@ti.com>, <michael@walle.cc>
CC:     <vigneshr@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
        <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <nicolas.ferre@microchip.com>, <zhengxunli@mxic.com.tw>,
        <jaimeliao@mxic.com.tw>,
        Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH v2 1/2] mtd: spi-nor: core: Introduce SPI_NOR_SOFT_RESET flash_info fixup_flag
Date:   Thu, 9 Dec 2021 21:04:35 +0200
Message-ID: <20211209190436.401946-1-tudor.ambarus@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

The Soft Reset and Rescue Sequence Support is defined in BFPT_DWORD(16)
starting with JESD216A. The first version of SFDP, JESD216 (April 2011),
defines just the first 9 BFPT DWORDS, thus it does not contain information
about the Software Reset and Rescue Support. Since this support can not
be discovered by parsing the first SFDP version, introduce a flash_info
fixup_flag that will be used either by flashes that define
JESD216 (April 2011) or by flashes that do not define SFDP at all.
In case a flash defines BFPT_DWORD(16) but with wrong values, one should
instead use a post_bfpt() hook and set SNOR_F_SOFT_RESET.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v2: no changes

 drivers/mtd/spi-nor/core.c | 3 +++
 drivers/mtd/spi-nor/core.h | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 2e21d5ac0e2d..32d80fdaa2a2 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2699,6 +2699,9 @@ static void spi_nor_init_fixup_flags(struct spi_nor *nor)
 
 	if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
 		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
+	if (fixup_flags & SPI_NOR_SOFT_RESET)
+		nor->flags |= SNOR_F_SOFT_RESET;
 }
 
 /**
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 2afb610853a9..70c6bb7f5f04 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -373,6 +373,8 @@ struct spi_nor_fixups {
  *                            memory size above 128Mib.
  *   SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
  *                            via a volatile bit.
+ *   SPI_NOR_SOFT_RESET:      flash supports software reset enable, reset
+ *                            sequence.
  * @mfr_flags:      manufacturer private flags. Used in the manufacturer fixup
  *                  hooks to differentiate support between flashes of the same
  *                  manufacturer.
@@ -416,6 +418,7 @@ struct flash_info {
 	u8 fixup_flags;
 #define SPI_NOR_4B_OPCODES		BIT(0)
 #define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(1)
+#define SPI_NOR_SOFT_RESET		BIT(2)
 
 	u8 mfr_flags;
 
-- 
2.25.1