Date:   Fri, 10 Dec 2021 16:09:28 -0600
From:   Rob Herring <robh@kernel.org>
To:     alexandru.tachici@analog.com
Cc:     o.rempel@pengutronix.de, kuba@kernel.org, netdev@vger.kernel.org,
        hkallweit1@gmail.com, davem@davemloft.net, robh+dt@kernel.org,
        linux-kernel@vger.kernel.org, linux@armlinux.org.uk,
        devicetree@vger.kernel.org, andrew@lunn.ch
Subject: Re: [PATCH v4 7/7] dt-bindings: net: phy: Add 10-baseT1L 2.4 Vpp
Message-ID: <YbPQGCA9OyFiqDQk@robh.at.kernel.org>
References: <20211210110509.20970-1-alexandru.tachici@analog.com>
 <20211210110509.20970-8-alexandru.tachici@analog.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20211210110509.20970-8-alexandru.tachici@analog.com>
Precedence: bulk

On Fri, 10 Dec 2021 13:05:09 +0200, alexandru.tachici@analog.com wrote:
> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> Add a tristate property to advertise desired transmit level.
> 
> If the device supports the 2.4 Vpp operating mode for 10BASE-T1L,
> as defined in 802.3gc, and the 2.4 Vpp transmit voltage operation
> is desired, property should be set to 1. This property is used
> to select whether Auto-Negotiation advertises a request to
> operate the 10BASE-T1L PHY in increased transmit level mode.
> 
> If property is set to 1, the PHY shall advertise a request
> to operate the 10BASE-T1L PHY in increased transmit level mode.
> If property is set to zero, the PHY shall not advertise
> a request to operate the 10BASE-T1L PHY in increased transmit level mode.
> 
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
> ---
>  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>