Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6AF36C4332F for ; Sat, 11 Dec 2021 18:01:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230461AbhLKSBK (ORCPT ); Sat, 11 Dec 2021 13:01:10 -0500 Received: from hostingweb31-40.netsons.net ([89.40.174.40]:60343 "EHLO hostingweb31-40.netsons.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231676AbhLKSAr (ORCPT ); Sat, 11 Dec 2021 13:00:47 -0500 Received: from [77.244.183.192] (port=64660 helo=melee.fritz.box) by hostingweb31.netsons.net with esmtpa (Exim 4.94.2) (envelope-from ) id 1mw6fu-0009HU-6N; Sat, 11 Dec 2021 19:00:46 +0100 From: Luca Ceresoli To: linux-kernel@vger.kernel.org Cc: Luca Ceresoli , linux-rtc@vger.kernel.org, linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org, Lee Jones , Rob Herring , Chanwoo Choi , Krzysztof Kozlowski , Alessandro Zummo , Alexandre Belloni , Wim Van Sebroeck , Guenter Roeck , Chiwoong Byun , Laxman Dewangan , Randy Dunlap Subject: [PATCH v5 5/9] mfd: max77714: Add driver for Maxim MAX77714 PMIC Date: Sat, 11 Dec 2021 18:59:47 +0100 Message-Id: <20211211175951.30763-6-luca@lucaceresoli.net> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211211175951.30763-1-luca@lucaceresoli.net> References: <20211211175951.30763-1-luca@lucaceresoli.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - hostingweb31.netsons.net X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lucaceresoli.net X-Get-Message-Sender-Via: hostingweb31.netsons.net: authenticated_id: luca+lucaceresoli.net/only user confirmed/virtual account not confirmed X-Authenticated-Sender: hostingweb31.netsons.net: luca@lucaceresoli.net X-Source: X-Source-Args: X-Source-Dir: Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a simple driver for the Maxim MAX77714 PMIC, supporting RTC and watchdog only. Signed-off-by: Luca Ceresoli Reviewed-by: Krzysztof Kozlowski --- Changes in v5: none Changes in v4: none Changes in v3: - Suggested by Lee Jones: - move struct mfd_cell to top of file - remove struct max77714 and its kmalloc, not used after probe - reword error messages - add "/* pF */" onto the end of the load_cap line Changes in v2: - fix "watchdog" word in heading comment (Guenter Roeck) - move struct max77714 to .c file (Krzysztof Kozlowski) - change include guard format (Krzysztof Kozlowski) - allow building as a module (Krzysztof Kozlowski) - remove of_match_ptr usage (Krzysztof Kozlowski / lkp) (Reported-by: kernel test robot ) --- MAINTAINERS | 2 + drivers/mfd/Kconfig | 14 ++++ drivers/mfd/Makefile | 1 + drivers/mfd/max77714.c | 152 +++++++++++++++++++++++++++++++++++ include/linux/mfd/max77714.h | 60 ++++++++++++++ 5 files changed, 229 insertions(+) create mode 100644 drivers/mfd/max77714.c create mode 100644 include/linux/mfd/max77714.h diff --git a/MAINTAINERS b/MAINTAINERS index a08f5167dfe0..ef3ffba828af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11586,6 +11586,8 @@ MAXIM MAX77714 PMIC MFD DRIVER M: Luca Ceresoli S: Maintained F: Documentation/devicetree/bindings/mfd/maxim,max77714.yaml +F: drivers/mfd/max77714.c +F: include/linux/mfd/max77714.h MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER M: Javier Martinez Canillas diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3fb480818599..1b9d772bdae6 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -855,6 +855,20 @@ config MFD_MAX77693 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77714 + tristate "Maxim Semiconductor MAX77714 PMIC Support" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Say yes here to add support for Maxim Semiconductor MAX77714. + This is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC, watchdog etc. This driver + provides common support for accessing the device; additional + drivers must be enabled in order to use each functionality of the + device. + config MFD_MAX77843 bool "Maxim Semiconductor MAX77843 PMIC Support" depends on I2C=y diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0b1b629aef3e..03115cf1336b 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -162,6 +162,7 @@ obj-$(CONFIG_MFD_MAX77620) += max77620.o obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o +obj-$(CONFIG_MFD_MAX77714) += max77714.o obj-$(CONFIG_MFD_MAX77843) += max77843.o obj-$(CONFIG_MFD_MAX8907) += max8907.o max8925-objs := max8925-core.o max8925-i2c.o diff --git a/drivers/mfd/max77714.c b/drivers/mfd/max77714.c new file mode 100644 index 000000000000..08dfb69bc6e8 --- /dev/null +++ b/drivers/mfd/max77714.c @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Maxim MAX77714 MFD Driver + * + * Copyright (C) 2021 Luca Ceresoli + * Author: Luca Ceresoli + */ + +#include +#include +#include +#include +#include +#include +#include + +static const struct mfd_cell max77714_cells[] = { + { .name = "max77714-watchdog" }, + { .name = "max77714-rtc" }, +}; + +static const struct regmap_range max77714_readable_ranges[] = { + regmap_reg_range(MAX77714_INT_TOP, MAX77714_INT_TOP), + regmap_reg_range(MAX77714_INT_TOPM, MAX77714_INT_TOPM), + regmap_reg_range(MAX77714_32K_STATUS, MAX77714_32K_CONFIG), + regmap_reg_range(MAX77714_CNFG_GLBL2, MAX77714_CNFG2_ONOFF), +}; + +static const struct regmap_range max77714_writable_ranges[] = { + regmap_reg_range(MAX77714_INT_TOPM, MAX77714_INT_TOPM), + regmap_reg_range(MAX77714_32K_CONFIG, MAX77714_32K_CONFIG), + regmap_reg_range(MAX77714_CNFG_GLBL2, MAX77714_CNFG2_ONOFF), +}; + +static const struct regmap_access_table max77714_readable_table = { + .yes_ranges = max77714_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77714_readable_ranges), +}; + +static const struct regmap_access_table max77714_writable_table = { + .yes_ranges = max77714_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77714_writable_ranges), +}; + +static const struct regmap_config max77714_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77714_CNFG2_ONOFF, + .rd_table = &max77714_readable_table, + .wr_table = &max77714_writable_table, +}; + +static const struct regmap_irq max77714_top_irqs[] = { + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_ONOFF, 0, MAX77714_INT_TOP_ONOFF), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_RTC, 0, MAX77714_INT_TOP_RTC), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GPIO, 0, MAX77714_INT_TOP_GPIO), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_LDO, 0, MAX77714_INT_TOP_LDO), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_SD, 0, MAX77714_INT_TOP_SD), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GLBL, 0, MAX77714_INT_TOP_GLBL), +}; + +static const struct regmap_irq_chip max77714_irq_chip = { + .name = "max77714-pmic", + .status_base = MAX77714_INT_TOP, + .mask_base = MAX77714_INT_TOPM, + .num_regs = 1, + .irqs = max77714_top_irqs, + .num_irqs = ARRAY_SIZE(max77714_top_irqs), +}; + +/* + * MAX77714 initially uses the internal, low precision oscillator. Enable + * the external oscillator by setting the XOSC_RETRY bit. If the external + * oscillator is not OK (probably not installed) this has no effect. + */ +static int max77714_setup_xosc(struct device *dev, struct regmap *regmap) +{ + /* Internal Crystal Load Capacitance, indexed by value of 32KLOAD bits */ + static const unsigned int load_cap[4] = {0, 10, 12, 22}; /* pF */ + unsigned int load_cap_idx; + unsigned int status; + int err; + + err = regmap_update_bits(regmap, MAX77714_32K_CONFIG, + MAX77714_32K_CONFIG_XOSC_RETRY, + MAX77714_32K_CONFIG_XOSC_RETRY); + if (err) + return dev_err_probe(dev, err, "Failed to configure the external oscillator\n"); + + err = regmap_read(regmap, MAX77714_32K_STATUS, &status); + if (err) + return dev_err_probe(dev, err, "Failed to read external oscillator status\n"); + + load_cap_idx = (status >> MAX77714_32K_STATUS_32KLOAD_SHF) + & MAX77714_32K_STATUS_32KLOAD_MSK; + + dev_info(dev, "Using %s oscillator, %d pF load cap\n", + status & MAX77714_32K_STATUS_32KSOURCE ? "internal" : "external", + load_cap[load_cap_idx]); + + return 0; +} + +static int max77714_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; + int err; + + regmap = devm_regmap_init_i2c(client, &max77714_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialise regmap\n"); + + err = max77714_setup_xosc(dev, regmap); + if (err) + return err; + + err = devm_regmap_add_irq_chip(dev, regmap, client->irq, + IRQF_ONESHOT | IRQF_SHARED, 0, + &max77714_irq_chip, &irq_data); + if (err) + return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n"); + + err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max77714_cells, ARRAY_SIZE(max77714_cells), + NULL, 0, NULL); + if (err) + return dev_err_probe(dev, err, "Failed to register child devices\n"); + + return 0; +} + +static const struct of_device_id max77714_dt_match[] = { + { .compatible = "maxim,max77714" }, + {}, +}; +MODULE_DEVICE_TABLE(of, max77714_dt_match); + +static struct i2c_driver max77714_driver = { + .driver = { + .name = "max77714", + .of_match_table = max77714_dt_match, + }, + .probe_new = max77714_probe, +}; +module_i2c_driver(max77714_driver); + +MODULE_DESCRIPTION("Maxim MAX77714 MFD core driver"); +MODULE_AUTHOR("Luca Ceresoli "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/max77714.h b/include/linux/mfd/max77714.h new file mode 100644 index 000000000000..4a274592d4f2 --- /dev/null +++ b/include/linux/mfd/max77714.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Maxim MAX77714 Register and data structures definition. + * + * Copyright (C) 2021 Luca Ceresoli + * Author: Luca Ceresoli + */ + +#ifndef __LINUX_MFD_MAX77714_H_ +#define __LINUX_MFD_MAX77714_H_ + +#include + +#define MAX77714_INT_TOP 0x00 +#define MAX77714_INT_TOPM 0x07 /* Datasheet says "read only", but it is RW */ + +#define MAX77714_INT_TOP_ONOFF BIT(1) +#define MAX77714_INT_TOP_RTC BIT(3) +#define MAX77714_INT_TOP_GPIO BIT(4) +#define MAX77714_INT_TOP_LDO BIT(5) +#define MAX77714_INT_TOP_SD BIT(6) +#define MAX77714_INT_TOP_GLBL BIT(7) + +#define MAX77714_32K_STATUS 0x30 +#define MAX77714_32K_STATUS_SIOSCOK BIT(5) +#define MAX77714_32K_STATUS_XOSCOK BIT(4) +#define MAX77714_32K_STATUS_32KSOURCE BIT(3) +#define MAX77714_32K_STATUS_32KLOAD_MSK 0x3 +#define MAX77714_32K_STATUS_32KLOAD_SHF 1 +#define MAX77714_32K_STATUS_CRYSTAL_CFG BIT(0) + +#define MAX77714_32K_CONFIG 0x31 +#define MAX77714_32K_CONFIG_XOSC_RETRY BIT(4) + +#define MAX77714_CNFG_GLBL2 0x91 +#define MAX77714_WDTEN BIT(2) +#define MAX77714_WDTSLPC BIT(3) +#define MAX77714_TWD_MASK 0x3 +#define MAX77714_TWD_2s 0x0 +#define MAX77714_TWD_16s 0x1 +#define MAX77714_TWD_64s 0x2 +#define MAX77714_TWD_128s 0x3 + +#define MAX77714_CNFG_GLBL3 0x92 +#define MAX77714_WDTC BIT(0) + +#define MAX77714_CNFG2_ONOFF 0x94 +#define MAX77714_WD_RST_WK BIT(5) + +/* Interrupts */ +enum { + MAX77714_IRQ_TOP_ONOFF, + MAX77714_IRQ_TOP_RTC, /* Real-time clock */ + MAX77714_IRQ_TOP_GPIO, /* GPIOs */ + MAX77714_IRQ_TOP_LDO, /* Low-dropout regulators */ + MAX77714_IRQ_TOP_SD, /* Step-down regulators */ + MAX77714_IRQ_TOP_GLBL, /* "Global resources": Low-Battery, overtemp... */ +}; + +#endif /* __LINUX_MFD_MAX77714_H_ */ -- 2.25.1