From:   Jason Wang <wangborong@cdjrlc.com>
To:     linus.walleij@linaro.org
Cc:     andy@kernel.org, brgl@bgdev.pl, linux-gpio@vger.kernel.org,
        linux-kernel@vger.kernel.org, Jason Wang <wangborong@cdjrlc.com>
Subject: [PATCH] gpio: sch: fix typo in a comment
Date:   Sun, 12 Dec 2021 11:11:08 +0800
Message-Id: <20211212031108.32212-1-wangborong@cdjrlc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Feedback-ID: bizesmtp:cdjrlc.com:qybgspam:qybgspam1
Precedence: bulk

The double `the' in the comment in line 142 is repeated. Remove one
of them from the comment.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
---
 drivers/gpio/gpio-sch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 0600f71462b5..acda4c5052d3 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -139,7 +139,7 @@ static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned int gpio_num,
 	/*
 	 * according to the datasheet, writing to the level register has no
 	 * effect when GPIO is programmed as input.
-	 * Actually the the level register is read-only when configured as input.
+	 * Actually the level register is read-only when configured as input.
 	 * Thus presetting the output level before switching to output is _NOT_ possible.
 	 * Hence we set the level after configuring the GPIO as output.
 	 * But we cannot prevent a short low pulse if direction is set to high
-- 
2.34.1