From:   Amjad Ouled-Ameur <aouledameur@baylibre.com>
To:     khilman@baylibre.com
Cc:     Amjad Ouled-Ameur <aouledameur@baylibre.com>,
        p.zabel@pengutronix.de, balbi@kernel.org, jbrunet@baylibre.com,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-usb@vger.kernel.org
Subject: [PATCH v5 3/3] phy: amlogic: meson8b-usb2: fix shared reset control use
Date:   Sun, 12 Dec 2021 21:18:44 +0100
Message-Id: <20211212201844.114949-4-aouledameur@baylibre.com>
In-Reply-To: <20211212201844.114949-1-aouledameur@baylibre.com>
References: <20211212201844.114949-1-aouledameur@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use reset_control_rearm() call if an error occurs in case
phy_meson8b_usb2_power_on() fails after reset() has been called, or in
case phy_meson8b_usb2_power_off() is called i.e the resource is no longer
used and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset
framework, use of reset_control_reset() on shared reset line should
be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/phy/amlogic/phy-meson8b-usb2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index 77e7e9b1428c..dd96763911b8 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -154,6 +154,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 	ret = clk_prepare_enable(priv->clk_usb_general);
 	if (ret) {
 		dev_err(&phy->dev, "Failed to enable USB general clock\n");
+		reset_control_rearm(priv->reset);
 		return ret;
 	}
 
@@ -161,6 +162,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 	if (ret) {
 		dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
 		clk_disable_unprepare(priv->clk_usb_general);
+		reset_control_rearm(priv->reset);
 		return ret;
 	}
 
@@ -199,6 +201,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)
 				dev_warn(&phy->dev, "USB ID detect failed!\n");
 				clk_disable_unprepare(priv->clk_usb);
 				clk_disable_unprepare(priv->clk_usb_general);
+				reset_control_rearm(priv->reset);
 				return -EINVAL;
 			}
 		}
@@ -218,6 +221,7 @@ static int phy_meson8b_usb2_power_off(struct phy *phy)
 
 	clk_disable_unprepare(priv->clk_usb);
 	clk_disable_unprepare(priv->clk_usb_general);
+	reset_control_rearm(priv->reset);
 
 	/* power off the PHY by putting it into reset mode */
 	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
-- 
2.25.1