Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Subject: Re: [PATCH V3 net-next 0/3] add Vertexcom MSE102x support
From:   patchwork-bot+netdevbpf@kernel.org
Message-Id: <163940640994.17097.12175748318895527945.git-patchwork-notify@kernel.org>
Date:   Mon, 13 Dec 2021 14:40:09 +0000
References: <1639320627-8827-1-git-send-email-stefan.wahren@i2se.com>
In-Reply-To: <1639320627-8827-1-git-send-email-stefan.wahren@i2se.com>
To:     Stefan Wahren <stefan.wahren@i2se.com>
Cc:     davem@davemloft.net, kuba@kernel.org, robh+dt@kernel.org,
        andrew@lunn.ch, michael.heimpold@in-tech.com,
        jimmy.shen@vertexcom.com, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Precedence: bulk

Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Sun, 12 Dec 2021 15:50:24 +0100 you wrote:
> This patch series adds support for the Vertexcom MSE102x Homeplug GreenPHY
> chips [1]. They can be connected either via RGMII, RMII or SPI to a host CPU.
> These patches handles only the last one, with an Ethernet over SPI protocol
> driver.
> 
> The code has been tested only on Raspberry Pi boards, but should work
> on other platforms.
> 
> [...]

Here is the summary with links:
  - [V3,net-next,1/3] dt-bindings: add vendor Vertexcom
    https://git.kernel.org/netdev/net-next/c/e4d60d9f3625
  - [V3,net-next,2/3] dt-bindings: net: add Vertexcom MSE102x support
    https://git.kernel.org/netdev/net-next/c/2717566f6661
  - [V3,net-next,3/3] net: vertexcom: Add MSE102x SPI support
    https://git.kernel.org/netdev/net-next/c/2f207cbf0dd4

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html