MIME-Version: 1.0
References: <20211128131853.15125-1-aford173@gmail.com> <20211128131853.15125-6-aford173@gmail.com>
In-Reply-To: <20211128131853.15125-6-aford173@gmail.com>
From:   Adam Ford <aford173@gmail.com>
Date:   Mon, 13 Dec 2021 21:40:17 -0600
Message-ID: <CAHCN7xJW14D8BVx1op+V9EAxcFFidSDkN1LN1rdHvG2TNHVtNg@mail.gmail.com>
Subject: Re: [PATCH V4 5/9] soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
To:     arm-soc <linux-arm-kernel@lists.infradead.org>
Cc:     Adam Ford-BE <aford@beaconembedded.com>,
        Tim Harvey <tharvey@gateworks.com>,
        Rob Herring <robh+dt@kernel.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Lucas Stach <l.stach@pengutronix.de>,
        devicetree <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Sun, Nov 28, 2021 at 7:19 AM Adam Ford <aford173@gmail.com> wrote:
>
> This adds the description for the i.MX8MN disp blk-ctrl.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>

Lucas,

Is there any chance you could give this series some feedback?  In
order to get more functionality on the Nano, we need the blk-ctrl on
Nano working.

thanks,

adam

> ---
>  drivers/soc/imx/imx8m-blk-ctrl.c | 77 +++++++++++++++++++++++++++++++-
>  1 file changed, 76 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index c2f076b56e24..511e74f0db8a 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -14,6 +14,7 @@
>  #include <linux/clk.h>
>
>  #include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/power/imx8mn-power.h>
>
>  #define BLK_SFT_RSTN   0x0
>  #define BLK_CLK_EN     0x4
> @@ -517,6 +518,77 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
>         .num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
>  };
>
> +
> +static int imx8mn_disp_power_notifier(struct notifier_block *nb,
> +                                     unsigned long action, void *data)
> +{
> +       struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
> +                                                power_nb);
> +
> +       if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
> +               return NOTIFY_OK;
> +
> +       /* Enable bus clock and deassert bus reset */
> +       regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
> +       regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
> +
> +       /*
> +        * On power up we have no software backchannel to the GPC to
> +        * wait for the ADB handshake to happen, so we just delay for a
> +        * bit. On power down the GPC driver waits for the handshake.
> +        */
> +       if (action == GENPD_NOTIFY_ON)
> +               udelay(5);
> +
> +
> +       return NOTIFY_OK;
> +}
> +
> +static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
> +       [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
> +               .name = "dispblk-mipi-dsi",
> +               .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
> +               .num_clks = 2,
> +               .gpc_name = "mipi-dsi",
> +               .rst_mask = BIT(0) | BIT(1),
> +               .clk_mask = BIT(0) | BIT(1),
> +               .mipi_phy_rst_mask = BIT(17),
> +       },
> +       [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
> +               .name = "dispblk-mipi-csi",
> +               .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
> +               .num_clks = 2,
> +               .gpc_name = "mipi-csi",
> +               .rst_mask = BIT(2) | BIT(3),
> +               .clk_mask = BIT(2) | BIT(3),
> +               .mipi_phy_rst_mask = BIT(16),
> +       },
> +       [IMX8MN_DISPBLK_PD_LCDIF] = {
> +               .name = "dispblk-lcdif",
> +               .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
> +               .num_clks = 3,
> +               .gpc_name = "lcdif",
> +               .rst_mask = BIT(4) | BIT(5),
> +               .clk_mask = BIT(4) | BIT(5),
> +       },
> +       [IMX8MN_DISPBLK_PD_ISI] = {
> +               .name = "dispblk-isi",
> +               .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
> +                                               "disp_apb_root"},
> +               .num_clks = 4,
> +               .gpc_name = "isi",
> +               .rst_mask = BIT(6) | BIT(7),
> +               .clk_mask = BIT(6) | BIT(7),
> +       },
> +};
> +
> +static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
> +       .max_reg = 0x84,
> +       .power_notifier_fn = imx8mn_disp_power_notifier,
> +       .domains = imx8mn_disp_blk_ctl_domain_data,
> +       .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
> +};
> +
>  static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
>         {
>                 .compatible = "fsl,imx8mm-vpu-blk-ctrl",
> @@ -524,7 +596,10 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
>         }, {
>                 .compatible = "fsl,imx8mm-disp-blk-ctrl",
>                 .data = &imx8mm_disp_blk_ctl_dev_data
> -       } ,{
> +       }, {
> +               .compatible = "fsl,imx8mn-disp-blk-ctrl",
> +               .data = &imx8mn_disp_blk_ctl_dev_data
> +       }, {
>                 /* Sentinel */
>         }
>  };
> --
> 2.32.0
>