Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752066AbXAXVU0 (ORCPT ); Wed, 24 Jan 2007 16:20:26 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752075AbXAXVU0 (ORCPT ); Wed, 24 Jan 2007 16:20:26 -0500 Received: from 125.14.124.24.cm.sunflower.com ([24.124.14.125]:20964 "EHLO mail.atipa.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752066AbXAXVUQ (ORCPT ); Wed, 24 Jan 2007 16:20:16 -0500 X-Greylist: delayed 848 seconds by postgrey-1.27 at vger.kernel.org; Wed, 24 Jan 2007 16:20:15 EST Message-ID: <45B7CA3D.9020601@atipa.com> Date: Wed, 24 Jan 2007 15:06:05 -0600 From: Roger Heflin User-Agent: Thunderbird 1.5.0.9 (X11/20070102) MIME-Version: 1.0 To: Linux-Kernel , e1000-devel@lists.sourceforge.net Subject: Nvidia MCP55 Machine reboots on ixgb driver load Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 24 Jan 2007 21:07:41.0328 (UTC) FILETIME=[AF45D900:01C73FFB] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 65546 Lines: 1457 Hello, I have a machine (actually 2 machines) that upon loading the intel 10GBe driver (ixgb) the machine reboots, I am using a RHAS4.4 based distribution with Vanilla 2.6.19.2 (the RHAS 4.4.03 kernel also reboots with the ixgb load), I don't see any messages on the machine before it reboots, loading the driver with debug does not appear to produce any extra messages. The basic steps are the I load the driver, the machine locks up, and then in a second or 2 it starts to post. I have tried the default ixgb driver in 2.6.19.2, and I have tried the open source intel driver on RH4.4, both cause the same reboot. I also tried the linux firmware development kit, and booting fc6 causes the same reboot upon the network driver load. I have tried pci=nomsi, noacpi, noapic, acpi=off, and a few others with the results staying the same. I have also tried various bios settings with no changes, the bios in the machine is the latest, a beta bios has similar results, I am talking to the MB vendor about the issue. I have 2 of the intel boards and they both appear to produce this behavior with this type of motherboard, with a different motherboard (different chipset) they appear to at least load the driver without killing the machine work correctly. dmesg and lspci, and lspci -vv, interrupts, and iomem follow. I suspect that it is a bios issue, and that there may not be a way around it, except for fixing the bios. The machine is a dual-dual core opteron, with an nvidia MCP55 chipset. The intel card is pci-x. I have tried it with only the intel card and the lsi megaraid card required for it to boot and the same reboot happens. What sort of bad behavior would cause this sort of reboot? Also note that the linux.nics@intel.com address is apparently unused and returns an email telling you to use a web page, and so far after using the web page I have not got any response indicating that anything got to anyone. Roger 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 02:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07) 02:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07) 03:04.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) 03:06.0 Fibre Channel: LSI Logic / Symbios Logic FC949X Fibre Channel Adapter (rev 01) 03:06.1 Fibre Channel: LSI Logic / Symbios Logic FC949X Fibre Channel Adapter (rev 01) 04:07.0 Ethernet controller: Intel Corporation 82597EX 10GbE Ethernet Controller (rev 02) 08:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 09:02.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01) Linux version 2.6.19.2 (root@lab116.lab.atipa.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #2 SMP Wed Jan 24 09:31:05 EST 2007 Command line: ro root=/dev/BootDisk/root elevator=deadline pci=routeirq BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable) BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data) BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917488) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used end_pfn_map = 1179648 DMI present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f8540 ACPI: XSDT (v001 A M I OEMXSDT 0x11000628 MSFT 0x00000097) @ 0x00000000dfff0100 ACPI: FADT (v003 A M I OEMFACP 0x11000628 MSFT 0x00000097) @ 0x00000000dfff0290 ACPI: MADT (v001 A M I OEMAPIC 0x11000628 MSFT 0x00000097) @ 0x00000000dfff0390 ACPI: OEMB (v001 A M I AMI_OEM 0x11000628 MSFT 0x00000097) @ 0x00000000dfffe040 ACPI: HPET (v001 A M I OEMHPET0 0x11000628 MSFT 0x00000097) @ 0x00000000dfff53d0 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x00000000dfff5410 ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @ 0x00000000dfff5520 ACPI: DSDT (v001 H8DM8 H8DM8000 0x00000000 INTL 0x20051117) @ 0x0000000000000000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used SRAT: Node 0 PXM 0 0-80000000 Entering add_active_range(0, 0, 159) 1 entries of 3200 used Entering add_active_range(0, 256, 524288) 1 entries of 3200 used SRAT: Node 1 PXM 1 80000000-e0000000 Entering add_active_range(1, 524288, 917488) 2 entries of 3200 used SRAT: Node 1 PXM 1 80000000-120000000 Entering add_active_range(1, 524288, 917488) 3 entries of 3200 used Entering add_active_range(1, 1048576, 1179648) 3 entries of 3200 used NUMA: Using 31 for the hash shift. Bootmem setup node 0 0000000000000000-0000000080000000 Bootmem setup node 1 0000000080000000-0000000120000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1179648 early_node_map[4] active PFN ranges 0: 0 -> 159 0: 256 -> 524288 1: 524288 -> 917488 1: 1048576 -> 1179648 On node 0 totalpages: 524191 DMA zone: 64 pages used for memmap DMA zone: 1079 pages reserved DMA zone: 2856 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 512064 pages, LIFO batch:31 Normal zone: 0 pages used for memmap On node 1 totalpages: 524272 DMA zone: 0 pages used for memmap DMA32 zone: 8192 pages used for memmap DMA32 zone: 385008 pages, LIFO batch:31 Normal zone: 2048 pages used for memmap Normal zone: 129024 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 00000000dfff0000 - 00000000dfffe000 Nosave address range: 00000000dfffe000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 00000000fec01000 Nosave address range: 00000000fec01000 - 00000000fee00000 Nosave address range: 00000000fee00000 - 00000000fef00000 Nosave address range: 00000000fef00000 - 00000000ff700000 Nosave address range: 00000000ff700000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) PERCPU: Allocating 34048 bytes of per cpu data Built 2 zonelists. Total pages: 1028952 Kernel command line: ro root=/dev/BootDisk/root elevator=deadline pci=routeirq Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ 4000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 4042040k/4718592k available (2264k kernel code, 151812k reserved, 989k data, 324k init) Calibrating delay using timer specific routine.. 4427.57 BogoMIPS (lpj=8855158) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 24k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12566127 Detected 12.566 MHz APIC timer. Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4422.74 BogoMIPS (lpj=8845495) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 2214 stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -5 cycles, maxerr 622 cycles) Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 4422.75 BogoMIPS (lpj=8845518) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 2214 stepping 02 CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff 113 cycles, maxerr 1138 cycles) Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4422.75 BogoMIPS (lpj=8845518) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 2214 stepping 02 CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff -8 cycles, maxerr 1140 cycles) Brought up 4 CPUs testing NMI watchdog ... OK. time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer. time.c: Detected 2211.638 MHz processor. migration_cost=305,385 checking if image is initramfs... it is Freeing initrd memory: 1702k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15.BR30._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15.BR31._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *14 ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14 ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:01.1[A] -> Link [LSMB] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 21 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20 ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 18 ACPI: PCI Interrupt 0000:03:04.0[A] -> Link [LNEC] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 17 ACPI: PCI Interrupt 0000:03:06.0[A] -> Link [LNEA] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 16 ACPI: PCI Interrupt 0000:03:06.1[B] -> Link [LNEB] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [LNEB] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:09:02.0[A] -> Link [LNEA] -> GSI 17 (level, low) -> IRQ 17 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture PCI: Bridge: 0000:00:06.0 IO window: b000-bfff MEM window: fe600000-fe6fffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:02:00.0 IO window: c000-dfff MEM window: fe700000-fe9fffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:02:00.1 IO window: e000-efff MEM window: fea00000-feafffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: c000-efff MEM window: fe700000-feafffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:08:00.0 IO window: disabled. MEM window: feb00000-febfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: feb00000-febfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.1 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:08:00.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1169640729.984:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2214 processors (version 2.00.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xc powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xe powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xc powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xe powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 Freeing unused kernel memory: 324k freed SCSI subsystem initialized Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT FC Host driver 3.04.02 ACPI: PCI Interrupt 0000:03:06.0[A] -> Link [LNEA] -> GSI 17 (level, low) -> IRQ 17 mptbase: Initiating ioc0 bringup input: AT Translated Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 1 ioc0: FC949X: Capabilities={Initiator,Target,LAN} input: PS/2 Logitech Mouse as /class/input/input1 scsi0 : ioc0: LSIFC949X, FwRev=01030200h, Ports=1, MaxQ=1023, IRQ=17 ACPI: PCI Interrupt 0000:03:06.1[B] -> Link [LNEB] -> GSI 16 (level, low) -> IRQ 16 mptbase: Initiating ioc1 bringup ioc1: FC949X: Capabilities={Initiator,Target,LAN} scsi 0:0:0:0: Direct-Access RaidCtrl In Band Device R001 PQ: 1 ANSI: 5 scsi1 : ioc1: LSIFC949X, FwRev=01030200h, Ports=1, MaxQ=1023, IRQ=16 scsi 0:0:0:11: Direct-Access YI-16SA2 array1-top R001 PQ: 0 ANSI: 5 sda : very big device. try to use READ CAPACITY(16). SCSI device sda: 8789059584 512-byte hdwr sectors (4499999 MB) sda: Write Protect is off sda: Mode Sense: bf 00 00 08 SCSI device sda: drive cache: write back sda : very big device. try to use READ CAPACITY(16). SCSI device sda: 8789059584 512-byte hdwr sectors (4499999 MB) sda: Write Protect is off sda: Mode Sense: bf 00 00 08 scsi 1:0:0:0: Direct-Access RaidCtrl In Band Device R001 PQ: 1 ANSI: 5 SCSI device sda: drive cache: write back sda: unknown partition table scsi 1:0:0:11: Direct-Access YI-16SA2 array1-top R001 PQ: 0 ANSI: 5 sdb : very big device. try to use READ CAPACITY(16). SCSI device sdb: 8789059584 512-byte hdwr sectors (4499999 MB) sd 0:0:0:11: Attached scsi disk sda sdb: Write Protect is off sdb: Mode Sense: bf 00 00 08 SCSI device sdb: drive cache: write back sdb : very big device. try to use READ CAPACITY(16). SCSI device sdb: 8789059584 512-byte hdwr sectors (4499999 MB) sdb: Write Protect is off sdb: Mode Sense: bf 00 00 08 SCSI device sdb: drive cache: write back sdb:<5>scsi 0:0:1:0: Direct-Access RaidCtrl In Band Device R001 PQ: 1 ANSI: 5 unknown partition table sd 1:0:0:11: Attached scsi disk sdb scsi 0:0:1:12: Direct-Access YI-16SA2 array1-bottom R001 PQ: 0 ANSI: 5 scsi 1:0:1:0: Direct-Access RaidCtrl In Band Device R001 PQ: 1 ANSI: 5 sdc : very big device. try to use READ CAPACITY(16). SCSI device sdc: 8789059584 512-byte hdwr sectors (4499999 MB) sdc: Write Protect is off sdc: Mode Sense: bf 00 00 08 SCSI device sdc: drive cache: write back sdc : very big device. try to use READ CAPACITY(16). SCSI device sdc: 8789059584 512-byte hdwr sectors (4499999 MB) sdc: Write Protect is off sdc: Mode Sense: bf 00 00 08 SCSI device sdc: drive cache: write back sdc: unknown partition table sd 0:0:1:12: Attached scsi disk sdc scsi 1:0:1:12: Direct-Access YI-16SA2 array1-bottom R001 PQ: 0 ANSI: 5 Fusion MPT SPI Host driver 3.04.02 sdd : very big device. try to use READ CAPACITY(16). SCSI device sdd: 8789059584 512-byte hdwr sectors (4499999 MB) sdd: Write Protect is off sdd: Mode Sense: bf 00 00 08 SCSI device sdd: drive cache: write back sdd : very big device. try to use READ CAPACITY(16). SCSI device sdd: 8789059584 512-byte hdwr sectors (4499999 MB) sdd: Write Protect is off sdd: Mode Sense: bf 00 00 08 SCSI device sdd: drive cache: write back sdd: unknown partition table sd 1:0:1:12: Attached scsi disk sdd Fusion MPT SAS Host driver 3.04.02 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megaraid: probe new device 0x1000:0x1960:0x1000:0x0520: bus 3:slot 4:func 0 ACPI: PCI Interrupt 0000:03:04.0[A] -> Link [LNEC] -> GSI 18 (level, low) -> IRQ 18 megaraid: fw version:[1L45] bios version:[G121] scsi2 : LSI Logic MegaRAID driver scsi[2]: scanning scsi channel 0 [Phy 0] for non-raid devices scsi 2:0:8:0: Processor SUPER GEM359 REV001 1.09 PQ: 0 ANSI: 2 scsi[2]: scanning scsi channel 1 [virtual] for logical drives scsi 2:1:0:0: Direct-Access MegaRAID LD 0 RAID1 69G 1L45 PQ: 0 ANSI: 2 SCSI device sde: 142577664 512-byte hdwr sectors (73000 MB) sde: Write Protect is off sde: Mode Sense: 00 00 00 00 sde: asking for cache data failed sde: assuming drive cache: write through SCSI device sde: 142577664 512-byte hdwr sectors (73000 MB) sde: Write Protect is off sde: Mode Sense: 00 00 00 00 sde: asking for cache data failed sde: assuming drive cache: write through sde: sde1 sde2 sd 2:1:0:0: Attached scsi disk sde device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1169640738.476:2): selinux=0 auid=4294967295 scsi 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 0 sd 0:0:0:11: Attached scsi generic sg2 type 0 scsi 0:0:1:0: Attached scsi generic sg3 type 0 sd 1:0:0:11: Attached scsi generic sg4 type 0 scsi 1:0:1:0: Attached scsi generic sg5 type 0 sd 0:0:1:12: Attached scsi generic sg6 type 0 sd 1:0:1:12: Attached scsi generic sg7 type 0 scsi 2:0:8:0: Attached scsi generic sg8 type 3 sd 2:1:0:0: Attached scsi generic sg9 type 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:08.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:08.0 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:09.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 015d9:1611 bound to 0000:00:09.0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe5fac00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe5fb000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-10: new high speed USB device using ehci_hcd and address 2 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 1-10: configuration #1 chosen from 1 choice input: Peppercon AG Multidevice as /class/input/input2 input: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:02.1-10 input: Peppercon AG Multidevice as /class/input/input3 input: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:02.1-10 Initializing USB Mass Storage driver... scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] scsi 3:0:0:0: Direct-Access PepperC Virtual Disc 1 0.01 PQ: 0 ANSI: 3 sd 3:0:0:0: Attached scsi removable disk sdf sd 3:0:0:0: Attached scsi generic sg10 type 0 usb-storage: device scan complete EXT3 FS on dm-0, internal journal device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sde1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Filesystem "dm-8": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-8 Ending clean XFS mount for filesystem: dm-8 Adding 8388600k swap on /dev/BootDisk/swap. Priority:-1 extents:1 across:8388600k NET: Registered protocol family 10 lo: Disabled Privacy Extensions hald[4193]: segfault at 00007fffcec0b000 rip 00000038d34708fa rsp 00007fffcec096f8 error 6 eth0: no IPv6 routers present mtrr: type mismatch for f0000000,1000000 old: write-back new: write-combining 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) Subsystem: Super Micro Computer Inc: Unknown device 1611 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [b8] #0d [0000] Capabilities: [8c] HyperTransport: MSI Mapping 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) Subsystem: Super Micro Computer Inc: Unknown device 1611 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 5 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x0, ASPM L0s L1, Port 4 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x0, ASPM L0s L1, Port 3 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 2 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x4 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 1 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <16us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Capabilities: [54] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0 Status: Bus=2 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD- : Upstream: Capacity=32, Commitment Limit=32 : Downstream: Capacity=16, Commitment Limit=16 Capabilities: [64] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 02:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0 Link: Latency L0s <4us, L1 <16us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x8 Capabilities: [54] PCI-X bridge device. Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3 Status: Bus=2 Dev=0 Func=1 64bit- 133MHz- SCD- USC-, SCO-, SRD- : Upstream: Capacity=32, Commitment Limit=32 : Downstream: Capacity=16, Commitment Limit=16 Capabilities: [64] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 03:04.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) Subsystem: LSI Logic / Symbios Logic MegaRAID 520 SCSI 320-1 Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/4 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [80] #0d [0000] Capabilities: [90] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 512 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 09:02.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Timedia Technology Co Ltd: Unknown device 3110 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-