Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C15F0C433EF for ; Thu, 16 Dec 2021 06:56:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234255AbhLPG4g (ORCPT ); Thu, 16 Dec 2021 01:56:36 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50400 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231685AbhLPG4e (ORCPT ); Thu, 16 Dec 2021 01:56:34 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B1E44C06173E; Wed, 15 Dec 2021 22:56:33 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 6FC3DB822E2; Thu, 16 Dec 2021 06:56:32 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id B2ACFC36AE2; Thu, 16 Dec 2021 06:56:29 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1639637791; bh=Opzm7PgrSNHQ/1vmgVHT+1J/KheON2cr3gBjqEDBahs=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=lz5lLVvEieicDp4OmIzaL7/Nd+VP3jT5fXGJBcryY+OyZ61Z3I0Z6aXcmpQW0gwQq z9H7UiM3aBNXHOp36HyrPMCpiQjql52iAZo8r/VMGgmFzRbX6AvPlCq635+B8nJoTm rn1TfWLozQtssL7nQSJdRuBxFA3jaHY3OW4jWVywJGyK5/3jyZWYo7NKsJvdtdoY4a ocx8r8juurSHqDGuPaCptlE1yRYvfncNKO4EPjl13I+fyX6G3U2E2XOlODV6DVR8bh mx9VN4gko4mvg3tNsl0ykc1JtxI4qzmjFXLjw6YHt8iEs7d7L1qCG+0bl6E63xcwmJ cEvq8zX6WjV0Q== Date: Thu, 16 Dec 2021 14:56:26 +0800 From: Shawn Guo To: Yunus Bas Cc: robh+dt@kernel.org, s.hauer@pengutronix.de, devicetree@vger.kernel.org, festevam@gmail.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v2 3/3] ARM: dts: imx6: phytec: Add PEB-WLBT-05 support Message-ID: <20211216065625.GY4216@dragon> References: <20211213123833.3011525-1-y.bas@phytec.de> <20211213123833.3011525-3-y.bas@phytec.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20211213123833.3011525-3-y.bas@phytec.de> User-Agent: Mutt/1.9.4 (2018-02-28) Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Dec 13, 2021 at 01:38:33PM +0100, Yunus Bas wrote: > The PEB-WLBT-05 is equipped with a Sterling-LWB radio module, which is > capable of Wi-Fi 802.11 b/g/n and Bluetooth 4.2. > > Signed-off-by: Yunus Bas > --- > Changes in v2: > - Changed node-name underscores to hyphens > --- > .../boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 1 + > .../boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 1 + > .../boot/dts/imx6q-phytec-mira-rdk-nand.dts | 1 + > .../dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi | 82 +++++++++++++++++ > .../boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 1 + > .../dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 1 + > .../dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi | 87 +++++++++++++++++++ > .../dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 1 + > .../dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 1 + > .../dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi | 19 ++++ > 10 files changed, 195 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi > create mode 100644 arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi > create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi > > diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts > index 8165fae2b1d1..d906a7f05aaa 100644 > --- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts > +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts > @@ -10,6 +10,7 @@ > #include "imx6qdl-phytec-mira.dtsi" > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" > #include "imx6qdl-phytec-mira-peb-av-02.dtsi" > +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" > > / { > model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND"; > diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts > index bbf5097ca974..322f071d972f 100644 > --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts > +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts > @@ -10,6 +10,7 @@ > #include "imx6qdl-phytec-mira.dtsi" > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" > #include "imx6qdl-phytec-mira-peb-av-02.dtsi" > +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" > > / { > model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC"; > diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts > index 95051e18324f..3f13726c8058 100644 > --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts > +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts > @@ -10,6 +10,7 @@ > #include "imx6qdl-phytec-mira.dtsi" > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" > #include "imx6qdl-phytec-mira-peb-av-02.dtsi" > +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" > > / { > model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND"; > diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi > new file mode 100644 > index 000000000000..0abf3e1e1f62 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi > @@ -0,0 +1,82 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2021 PHYTEC Messtechnik GmbH > + * Author: Yunus Bas > + */ > + > +#include > +#include > + > +/ { > + reg_wl_en: regulator-wl-en { > + compatible = "regulator-fixed"; > + regulator-name = "wlan_en"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wl>; > + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + startup-delay-us = <100>; > + status = "disabled"; > + }; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3_bt>; > + uart-has-rtscts; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; > + device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; > + status = "disabled"; > + }; > +}; > + > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3_wl>; > + vmmc-supply = <®_wl_en>; > + bus-width = <4>; > + non-removable; > + no-1-8-v; > + status = "disabled"; > + > + brmcf: wifi@1 { > + compatible = "brcm,bcm4329-fmac"; Shouldn't we have a 'reg' property matching the unit-address in the node name? Shawn > + }; > +}; > + > +&iomuxc { > + pinctrl_uart3_bt: uart3grp-bt { > + fsl,pins = < > + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 > + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 > + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0xb0b1 /* BT ENABLE */ > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0xb0b1 /* DEV WAKEUP */ > + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0xb0b1 /* HOST WAKEUP */ > + >; > + }; > + > + pinctrl_usdhc3_wl: usdhc3grp-wl { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + >; > + }; > + > + pinctrl_wl: wlgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0xb0b1 /* WLAN ENABLE */ > + >; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts > index 343639cb035c..a18266598d39 100644 > --- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts > +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts > @@ -10,6 +10,7 @@ > #include "imx6qdl-phytec-mira.dtsi" > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" > #include "imx6qdl-phytec-mira-peb-av-02.dtsi" > +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" > > / { > model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND"; > diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts > index bff98e676980..607eddc5030f 100644 > --- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts > +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts > @@ -10,6 +10,7 @@ > #include "imx6ul-phytec-segin.dtsi" > #include "imx6ul-phytec-segin-peb-eval-01.dtsi" > #include "imx6ul-phytec-segin-peb-av-02.dtsi" > +#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi" > > / { > model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND"; > diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi > new file mode 100644 > index 000000000000..4a75745d6030 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi > @@ -0,0 +1,87 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2021 PHYTEC Messtechnik GmbH > + * Author: Yunus Bas > + */ > + > +#include > +#include > + > +/ { > + reg_wl_en: regulator-wl-en { > + compatible = "regulator-fixed"; > + regulator-name = "wlan_en"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wl>; > + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + startup-delay-us = <100>; > + status = "disabled"; > + }; > +}; > + > +&iomuxc { > + pinctrl_bt: btgrp { > + fsl,pins = < > + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3031 /* BT ENABLE */ > + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x3031 /* HOST WAKEUP */ > + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x3031 /* DEV WAKEUP */ > + >; > + }; > + > + pinctrl_uart2_bt: uart2grp-bt { > + fsl,pins = < > + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059 > + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059 > + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x17059 > + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x17059 > + >; > + }; > + > + pinctrl_usdhc2_wl: usdhc2grp-wl { > + fsl,pins = < > + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051 > + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061 > + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x10051 > + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x10051 > + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x10051 > + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x10051 > + >; > + }; > + > + pinctrl_wl: wlgrp { > + fsl,pins = < > + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3031 /* WLAN ENABLE */ > + >; > + }; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>; > + uart-has-rtscts; > + status = "disabled"; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; > + device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2_wl>; > + vmmc-supply = <®_wl_en>; > + bus-width = <4>; > + non-removable; > + no-1-8-v; > + status = "disabled"; > + > + brmcf: wifi@1 { > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts > index c8d3eff9ed4b..1d7362b5ac91 100644 > --- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts > +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts > @@ -10,6 +10,7 @@ > #include "imx6ull-phytec-segin.dtsi" > #include "imx6ull-phytec-segin-peb-eval-01.dtsi" > #include "imx6ull-phytec-segin-peb-av-02.dtsi" > +#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi" > > / { > model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND"; > diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts > index e168494e0a6d..4bcbae024d8d 100644 > --- a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts > +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts > @@ -9,6 +9,7 @@ > #include "imx6ull-phytec-phycore-som.dtsi" > #include "imx6ull-phytec-segin.dtsi" > #include "imx6ull-phytec-segin-peb-eval-01.dtsi" > +#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi" > > / { > model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND"; > diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi > new file mode 100644 > index 000000000000..df25814a3371 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi > @@ -0,0 +1,19 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2021 PHYTEC Messtechnik GmbH > + * Author: Yunus Bas > + */ > + > +#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi" > + > +&iomuxc { > + /delete-node/ wlgrp; > +}; > + > +&iomuxc_snvs { > + pinctrl_wl: wlgrp { > + fsl,pins = < > + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3031 > + >; > + }; > +}; > -- > 2.25.1 >