From:   Abel Vesa <abel.vesa@nxp.com>
To:     Rob Herring <robh@kernel.org>, Dong Aisheng <aisheng.dong@nxp.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Fabio Estevam <festevam@gmail.com>
Cc:     Pengutronix Kernel Team <kernel@pengutronix.de>,
        linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org,
        NXP Linux Team <linux-imx@nxp.com>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        Abel Vesa <abel.vesa@nxp.com>, Jacky Bai <ping.bai@nxp.com>
Subject: [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl
Date:   Thu, 16 Dec 2021 20:48:06 +0200
Message-Id: <1639680494-23183-3-git-send-email-abel.vesa@nxp.com>
In-Reply-To: <1639680494-23183-1-git-send-email-abel.vesa@nxp.com>
References: <1639680494-23183-1-git-send-email-abel.vesa@nxp.com>
Precedence: bulk

From: Jacky Bai <ping.bai@nxp.com>

The i.MX8DXL is a device targeting the automotive and industrial
market segments. The flexibility of the architecture allows for
use in a wide variety of general embedded applications. The chip
is designed to achieve both high performance and low power consumption.
The chip relies on the power efficient dual (2x) Cortex-A35 cluster.

Add the reserved memory node property for dsp reserved memory,
the wakeup-irq property for SCU node, the imx ion, the rpmsg and the
cm4 rproc support.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 245 +++++++++++++++++++++
 1 file changed, 245 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
new file mode 100644
index 000000000000..f16f88882c39
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &eqos;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mu1 = &lsio_mu1;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	scu {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: imx8dxl-pd {
+			compatible = "fsl,imx8dxl-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+			clocks = <&xtal32k &xtal24m>;
+			clock-names = "xtal_32KHz", "xtal_24Mhz";
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: imx8qx-ocotp {
+			compatible = "fsl,imx8dxl-scu-ocotp", "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
+		};
+
+		watchdog {
+			compatible = "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	sc_pwrkey: sc-powerkey {
+		compatible = "fsl,imx8-pwrkey";
+		linux,keycode = <KEY_POWER>;
+		wakeup-source;
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8dxl-ss-adma.dtsi"
+#include "imx8dxl-ss-conn.dtsi"
+#include "imx8dxl-ss-lsio.dtsi"
+#include "imx8dxl-ss-ddr.dtsi"
-- 
2.31.1