Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965578AbXAZJT3 (ORCPT ); Fri, 26 Jan 2007 04:19:29 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965587AbXAZJT3 (ORCPT ); Fri, 26 Jan 2007 04:19:29 -0500 Received: from server077.de-nserver.de ([62.27.12.245]:39156 "EHLO server077.de-nserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965578AbXAZJTZ (ORCPT ); Fri, 26 Jan 2007 04:19:25 -0500 Message-ID: <45B9C791.8020009@profihost.com> Date: Fri, 26 Jan 2007 10:19:13 +0100 From: Stefan Priebe - FH User-Agent: Thunderbird 1.5.0.9 (Windows/20061207) MIME-Version: 1.0 To: Luming Yu CC: Stephen Evanchik , linux-kernel@vger.kernel.org Subject: Re: SATA ahci Bug in 2.6.19.x References: <45B46FA0.2060901@profihost.com> <3877989d0701251925i8bbc09emd8dcad8d098195d2@mail.gmail.com> <3877989d0701252122s7e5ad92fo5496daf566fd9f97@mail.gmail.com> In-Reply-To: <3877989d0701252122s7e5ad92fo5496daf566fd9f97@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-User-Auth: Auth by hostmaster@profihost.com through 84.134.56.132 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 48497 Lines: 1113 Hi! acpi=off does not help i've already tried that. Ok here some outputs: 1.) complete dmesg with 2.6.16.27 (works) Linux version 2.6.16.27amd (root@server275-han) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #6 SMP Sat Aug 26 14:29:07 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa850 ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0100 ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0290 ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0390 ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0400 ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ 0x000000003bfbe040 ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003bfb0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003bfb0000 On node 0 totalpages: 240991 DMA zone: 2709 pages, LIFO batch:0 DMA32 zone: 238282 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) Checking aperture... CPU 0: aperture @ f0000000 size 128 MB Built 1 zonelists Kernel command line: root=/dev/sda6 ro rootflags=quota Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2400.214 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 962212k/982720k available (2939k kernel code, 20120k reserved, 1327k data, 220k init) Calibrating delay using timer specific routine.. 4810.51 BogoMIPS (lpj=9621030) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 Using local APIC timer interrupts. result 12501128 Detected 12.501 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. migration_cost=0 DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 PCI-DMA: Disabling IOMMU. pnp: 00:06: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: faf00000-fbffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered (default) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] Allocate Port Service[0000:00:02.0:pcie02] Allocate Port Service[0000:00:02.0:pcie03] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] Allocate Port Service[0000:00:03.0:pcie02] Allocate Port Service[0000:00:03.0:pcie03] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 16 throttling states) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 isa bounce pool size: 16 pages floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 Intel(R) PRO/1000 Network Driver - version 6.3.9-k4 Copyright (c) 1999-2005 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209 eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. netconsole: device eth0 not up yet, forcing it eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 netconsole: carrier detect appears untrustworthy, waiting 4 seconds netconsole: network logging started Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... Adaptec aacraid driver (1.1-4 Aug 26 2006 14:27:50) megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005) GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. libata version 1.20 loaded. ahci 0000:00:0f.0: version 1.2 GSI 19 sharing vector 0xD9 and IRQ 19 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225 ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225 ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225 ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225 ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023 88:40ff ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ahci ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023 88:40ff ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : ahci ata3: no device found (phy stat 00000000) scsi2 : ahci ata4: no device found (phy stat 00000000) scsi3 : ahci Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 < sdb5 sdb6 sdb7 > sd 1:0:0:0: Attached scsi disk sdb Fusion MPT base driver 3.03.07 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.07 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV) powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV) powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV) powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0x10, vid 0x6 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 220k freed Adding 1349420k swap on /dev/sda7. Priority:-1 extents:1 across:1349420k 2.) complete dmesg output with 2.6.18.6 (works) Linux version 2.6.18.3amd (root@neuerserver) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #2 SMP Wed Dec 20 14:26:51 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa850 ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0100 ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0290 ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0390 ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0400 ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ 0x000000003bfbe040 ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 On node 0 totalpages: 240803 DMA zone: 2521 pages, LIFO batch:0 DMA32 zone: 238282 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) Built 1 zonelists. Total pages: 240803 Kernel command line: nfs root=/dev/nfs nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2400.084 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ f0000000 size 128 MB Memory: 961352k/982720k available (3487k kernel code, 20768k reserved, 1452k data, 228k init) Calibrating delay using timer specific routine.. 4804.44 BogoMIPS (lpj=9608882) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) SMP alternatives: switching to UP code Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12500453 Detected 12.500 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 PCI-DMA: Disabling IOMMU. pnp: 00:06: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: faf00000-fbffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 16 throttling states) ACPI: Getting cpuindex for acpiid 0x2 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209 eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... Adaptec aacraid driver (1.1-5[2409]-mh2) megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. libata version 2.00 loaded. ahci 0000:00:0f.0: version 2.0 GSI 19 sharing vector 0xD9 and IRQ 19 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225 ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225 ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225 ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225 scsi0 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 < sdb5 sdb6 sdb7 > sd 1:0:0:0: Attached scsi disk sdb Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.01 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 3.) complete output (2.6.19.2) (with acpi does not work) BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 245680) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa850 ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0100 ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0290 ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0390 ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ 0x000000003bfb0400 ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ 0x000000003bfbe040 ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 245680) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 245680 On node 0 totalpages: 245583 DMA zone: 56 pages used for memmap DMA zone: 1474 pages reserved DMA zone: 2469 pages, LIFO batch:0 DMA32 zone: 3302 pages used for memmap DMA32 zone: 238282 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) PERCPU: Allocating 36352 bytes of per cpu data Built 1 zonelists. Total pages: 240751 Kernel command line: nfs root=/dev/nfs nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ f0000000 size 128 MB Memory: 961140k/982720k available (3530k kernel code, 20980k reserved, 1474k data, 264k init) Calibrating delay using timer specific routine.. 4804.06 BogoMIPS (lpj=9608139) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) SMP alternatives: switching to UP code Freeing SMP alternatives: 32k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12501046 Detected 12.501 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2400.198 MHz processor. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 PCI: Cannot allocate resource region 0 of device 0000:00:00.0 PCI-DMA: Disabling IOMMU. pnp: 00:06: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: faf00000-fbffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 16 throttling states) ACPI: Getting cpuindex for acpiid 0x2 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... Adaptec aacraid driver (1.1-5[2409]-mh2) megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. ahci 0000:00:0f.0: version 2.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277 ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277 ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277 ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277 scsi0 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 04(08) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata1: port is slow to respond, please be patient (Status 0x80) ata1: port failed to respond (30 secs, Status 0x80) ata1: COMRESET failed (device not ready) ata1: hardreset failed, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0x80) ata1: port failed to respond (30 secs, Status 0x80) ata1: COMRESET failed (device not ready) ata1: hardreset failed, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0x80) ata1: port failed to respond (30 secs, Status 0x80) ata1: COMRESET failed (device not ready) ata1: reset failed, giving up scsi1 : ahci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 08(08) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: reset failed, giving up scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.02 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Sending DHCP requests ., OK IP-Config: Got DHCP answer from 85.158.176.245, my address is 85.158.176.246 IP-Config: Complete: device=eth0, addr=85.158.176.246, mask=255.255.255.0, gw=85.158.176.1, host=85.158.176.246, domain=, nis-domain=(none), bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath= Looking up port of RPC 100003/2 on 85.158.176.245 Looking up port of RPC 100005/1 on 85.158.176.245 VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 264k freed 4.) complete output (2.6.19.2) (acpi=off does not work) BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 245680) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.3 present. Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 245680) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 245680 On node 0 totalpages: 245583 DMA zone: 56 pages used for memmap DMA zone: 1474 pages reserved DMA zone: 2469 pages, LIFO batch:0 DMA32 zone: 3302 pages used for memmap DMA32 zone: 238282 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Intel MultiProcessor Specification v1.1 MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) I/O APIC #1 at 0xFEC00000. I/O APIC #2 at 0xFECC0000. Setting APIC routing to flat Processors: 1 Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) PERCPU: Allocating 36352 bytes of per cpu data Built 1 zonelists. Total pages: 240751 Kernel command line: nfs root=/dev/nfs nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp acpi=off BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ f0000000 size 128 MB Memory: 961140k/982720k available (3530k kernel code, 20980k reserved, 1474k data, 264k init) Calibrating delay using timer specific routine.. 4818.82 BogoMIPS (lpj=9637645) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) SMP alternatives: switching to UP code Freeing SMP alternatives: 32k freed Using local APIC timer interrupts. result 12500751 Detected 12.500 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. time.c: Detected 2400.142 MHz processor. NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized libata version 2.00 loaded. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:13.1 PCI: Using IRQ router default [1106/3287] at 0000:00:11.0 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 27 PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31 PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 21 PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 20 PCI->APIC IRQ transform: 0000:00:10.1[C] -> IRQ 22 PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21 PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 PCI: Cannot allocate resource region 0 of device 0000:00:00.0 PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: faf00000-fbffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... Adaptec aacraid driver (1.1-5[2409]-mh2) megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. ahci 0000:00:0f.0: version 2.0 ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000000D00 ctl 0x0 bmdma 0x0 irq 1277 ata2: SATA max UDMA/133 cmd 0xFFFFC20000000D80 ctl 0x0 bmdma 0x0 irq 1277 ata3: SATA max UDMA/133 cmd 0xFFFFC20000000E00 ctl 0x0 bmdma 0x0 irq 1277 ata4: SATA max UDMA/133 cmd 0xFFFFC20000000E80 ctl 0x0 bmdma 0x0 irq 1277 scsi0 : ahci ata1: SATA link down (SStatus 601 SControl 300) scsi1 : ahci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) APIC error on CPU0: 04(08) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: reset failed, giving up scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.02 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x6 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Sending DHCP requests ., OK IP-Config: Got DHCP answer from 85.158.176.245, my address is 85.158.176.246 IP-Config: Complete: device=eth0, addr=85.158.176.246, mask=255.255.255.0, gw=85.158.176.1, host=85.158.176.246, domain=, nis-domain=(none), bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath= Looking up port of RPC 100003/2 on 85.158.176.245 Looking up port of RPC 100005/1 on 85.158.176.245 VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 264k freed Stefan Luming Yu schrieb: > On 1/26/07, Stephen Evanchik wrote: >> On 1/25/07, Luming Yu wrote: >> > From the log: >> > 2.6.18.3: >> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 >> > 2.6.20-rc5: >> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21" >> > >> > Sounds like acpi interrupt configure problem. Please try acpi=off >> first. >> >> >> Still does not recognize the SATA device (and the machine fails to >> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this >> evening. I am going to build a vanilla 2.6.18 and see if that still >> works as I am currently running an FC5 kernel. >> > Is there any difference in dmesg with acpi=off? > what is your sata driver? - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/