Message-ID: <247b7421-e195-2e7c-b210-3165e8ea83a7@gmail.com>
Date:   Sun, 19 Dec 2021 10:21:32 -0800
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:91.0) Gecko/20100101
 Thunderbird/91.4.0
Subject: Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the
 interrupt
Content-Language: en-US
To:     "Lad, Prabhakar" <prabhakar.csengg@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>
Cc:     Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
        Rob Herring <robh+dt@kernel.org>,
        Nicolas Saenz Julienne <nsaenz@kernel.org>,
        Ray Jui <rjui@broadcom.com>,
        Scott Branden <sbranden@broadcom.com>,
        bcm-kernel-feedback-list@broadcom.com,
        Chris Brandt <chris.brandt@renesas.com>,
        Wolfram Sang <wsa+renesas@sang-engineering.com>,
        Linux I2C <linux-i2c@vger.kernel.org>,
        linux-rpi-kernel@lists.infradead.org,
        LAK <linux-arm-kernel@lists.infradead.org>,
        LKML <linux-kernel@vger.kernel.org>,
        Linux-Renesas <linux-renesas-soc@vger.kernel.org>
References: <20211218165258.16716-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
 <20211218165258.16716-2-prabhakar.mahadev-lad.rj@bp.renesas.com>
 <a02d76dc-52cc-3ecc-5ef7-825c3167431a@gmail.com>
 <CA+V-a8ug-7i7H=pc4j+WtL8ARC6UVhxaeJ1Db23s_yEFTSu8pw@mail.gmail.com>
 <CA+V-a8v8RLCEphjyNxCn+BRaqudwoLxJibjp1ZG5GEv4htNK9g@mail.gmail.com>
From:   Florian Fainelli <f.fainelli@gmail.com>
In-Reply-To: <CA+V-a8v8RLCEphjyNxCn+BRaqudwoLxJibjp1ZG5GEv4htNK9g@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 12/19/2021 1:52 AM, Lad, Prabhakar wrote:
> Hi Florian,
> 
> On Sat, Dec 18, 2021 at 10:44 PM Lad, Prabhakar
> <prabhakar.csengg@gmail.com> wrote:
>>
>> Hi Florian,
>>
>> Thank you for the review.
>>
>> On Sat, Dec 18, 2021 at 9:17 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
>>>
>>>
>>>
>>> On 12/18/2021 8:52 AM, Lad Prabhakar wrote:
>>>> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
>>>> allocation of IRQ resources in DT core code, this causes an issue
>>>> when using hierarchical interrupt domains using "interrupts" property
>>>> in the node as this bypasses the hierarchical setup and messes up the
>>>> irq chaining.
>>>>
>>>> In preparation for removal of static setup of IRQ resource from DT core
>>>> code use platform_get_irq().
>>>>
>>>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>>>
>>> Just one nit below:
>>>> ---
>>>>    drivers/i2c/busses/i2c-bcm2835.c | 11 ++++-------
>>>>    1 file changed, 4 insertions(+), 7 deletions(-)
>>>>
>>>> diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
>>>> index 37443edbf754..d63dec5f3cb1 100644
>>>> --- a/drivers/i2c/busses/i2c-bcm2835.c
>>>> +++ b/drivers/i2c/busses/i2c-bcm2835.c
>>>> @@ -402,7 +402,7 @@ static const struct i2c_adapter_quirks bcm2835_i2c_quirks = {
>>>>    static int bcm2835_i2c_probe(struct platform_device *pdev)
>>>>    {
>>>>        struct bcm2835_i2c_dev *i2c_dev;
>>>> -     struct resource *mem, *irq;
>>>> +     struct resource *mem;
>>>>        int ret;
>>>>        struct i2c_adapter *adap;
>>>>        struct clk *mclk;
>>>> @@ -452,12 +452,9 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
>>>>                return ret;
>>>>        }
>>>>
>>>> -     irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>>>> -     if (!irq) {
>>>> -             dev_err(&pdev->dev, "No IRQ resource\n");
>>>> -             return -ENODEV;
>>>> -     }
>>>> -     i2c_dev->irq = irq->start;
>>>> +     i2c_dev->irq = platform_get_irq(pdev, 0);
>>>> +     if (i2c_dev->irq <= 0)
>>>> +             return i2c_dev->irq ? i2c_dev->irq : -ENXIO;
>>>
>>> Why not just check for a negative return code and propagate it as is?
>>>
>> platform_get_irq() may return 0 said that we do get a splat in this
>> case and further request_irq() will fail so instead check it here.
>>
> My bad, just the negative check should suffice.

Think so too, looking forward to v2, thanks!
-- 
Florian