Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 21 Nov 2001 18:51:53 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 21 Nov 2001 18:51:37 -0500 Received: from holly.csn.ul.ie ([136.201.105.4]:45835 "HELO holly.csn.ul.ie") by vger.kernel.org with SMTP id ; Wed, 21 Nov 2001 18:51:16 -0500 Date: Wed, 21 Nov 2001 23:51:07 +0000 (GMT) From: Dave Airlie X-X-Sender: To: Subject: PCMCIA and APM/ACPI issue (xircom card problem) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I reported an issue with later kernels with Xircom adapter not showing up in /proc/pci and not functioning properly... I took the time to track it down and have discovered the root cause of the problem .. 2.4.10 was working for me so I went back and conducted my experiments with it .. I'm using PCMCIA 3.1.29 also. with 2.4.10 with CONFIG_PM, CONFIG_ACPI and CONFIG_APM=m it doesn't work. with 2.4.10 with CONFIG_PM, CONFIG_ACPI and no CONFIG_APM it doesn't work. with 2.4.10 with CONFIG_PM, CONFIG_ACPI off, and CONFIG_APM=m it does work.. each time I rebuilt the pcmcia-cs package against the new kernel and installed it .. below are four files... lspci -xv -H1 and dmesg for the kernels with ACPI and APM on... lspci -xv doesn't work it gives some can't read 64 bytes of configuration space. the same problem is there in 2.4.15-pre4 also ... I might go try and get the results with 2.4.15-pre8 and pcmcia-16Nov if I get a chance.. Dave. -- David Airlie, Software Engineer http://www.skynet.ie/~airlied / airlied@skynet.ie pam_smb / Linux DecStation / Linux VAX / ILUG person dmesg_acpi_on_2_4_10_pcmcia_3.1.29 Linux version 2.4.10-da1 (root@radon) (gcc version 2.95.2 19991024 (release)) #1 Wed Nov 21 23:27:49 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fec000 (usable) BIOS-e820: 0000000007fec000 - 0000000007ff0000 (reserved) BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) On node 0 totalpages: 32748 zone(0): 4096 pages. zone(1): 28652 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Kernel command line: BOOT_IMAGE=linux-old ro root=306 vga=0x0301 noinitrd Initializing CPU#0 Detected 430.141 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 858.52 BogoMIPS Memory: 127192k/130992k available (778k kernel code, 3412k reserved, 187k data, 180k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 0a Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 got res[10000000:10000fff] for resource 0 of Texas Instruments PCI1225 got res[10001000:10001fff] for resource 0 of Texas Instruments PCI1225 (#2) Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd devfs: v0.116 (20010919) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ACPI: Core Subsystem version [20010831] ACPI: Subsystem enabled pty: 256 Unix98 ptys configured block: 128 slots per queue, batch=16 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHH2064AT, ATA DISK drive hdc: TORiSAN DVD-ROM DRD-U624, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 12685680 sectors (6495 MB) w/512KiB Cache, CHS=789/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p3 < p5 p6 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 180k freed Adding Swap: 136512k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.268 $ time 23:09:52 Nov 21 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:03.0 PCI: Sharing IRQ 11 with 00:03.1 usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF c7d4e8a0, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: dce0 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c7d4e8a0 usb-uhci.c: v1.268:USB Universal Host Controller Interface driver PCI: Found IRQ 5 for device 00:08.0 maestro: Configuring ESS Maestro 2E found at IO 0xD800 IRQ 5 maestro: subvendor id: 0x00ab1028 maestro: PCI power management capability: 0x7622 maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf maestro: 1 channels configured. maestro: version 0.15 time 23:09:12 Nov 21 2001 Linux PCMCIA Card Services 3.1.29 kernel build: 2.4.10-da1 #1 Wed Nov 21 23:27:49 GMT 2001 options: [pci] [cardbus] [apm] Intel ISA/PCI/CardBus PCIC probe: PCI: Found IRQ 11 for device 00:03.0 PCI: Sharing IRQ 11 with 00:03.1 PCI: Sharing IRQ 11 with 00:07.2 PCI: Found IRQ 11 for device 00:03.1 PCI: Sharing IRQ 11 with 00:03.0 PCI: Sharing IRQ 11 with 00:07.2 TI 1225 rev 01 PCI-to-CardBus at slot 00:03, mem 0x10000000 host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 4/4] host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 5/5] spurious 8259A interrupt: IRQ7. ISA irqs (scanned) = 3,4,7,10 PCI status changes cs: cb_alloc(bus 4): vendor 0xffff, device 0xffff lspci -xv -H1 for ACPI 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Flags: bus master, medium devsel, latency 32 Memory at f4000000 (32-bit, prefetchable) Capabilities: [a0] AGP version 1.0 00: 86 80 90 71 06 01 10 22 03 00 00 06 00 20 00 00 10: 08 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fc000000-feffffff 00: 86 80 91 71 1f 01 20 02 03 00 04 06 00 20 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 e0 e0 a0 22 20: 00 fc f0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00 00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at 10000000 (32-bit, non-prefetchable) Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 16-bit legacy interface ports at 0001 00: 4c 10 1c ac 07 00 10 02 01 00 07 06 08 20 82 00 10: 00 00 00 10 a0 00 00 22 00 04 04 20 00 00 00 60 20: 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 80 06 40: 28 10 ab 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at 10001000 (32-bit, non-prefetchable) Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 16-bit legacy interface ports at 0001 00: 4c 10 1c ac 07 00 10 02 01 00 07 06 08 20 82 00 10: 00 10 00 10 a0 00 00 02 00 05 05 20 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 c0 07 40: 28 10 ab 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00: 86 80 10 71 0f 01 80 02 02 00 80 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 32 I/O ports at 0860 00: 86 80 11 71 05 00 80 02 01 80 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at dce0 00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: e1 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03) Flags: medium devsel 00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at d800 Capabilities: [c0] Power Management version 2 00: 5d 12 78 19 05 00 90 02 10 00 01 04 00 20 00 00 10: 01 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ab 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 01 02 18 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP 2x (rev 64) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, stepping, medium devsel, latency 32, IRQ 11 Memory at fd000000 (32-bit, non-prefetchable) I/O ports at ec00 Memory at fcfff000 (32-bit, non-prefetchable) Capabilities: [50] AGP version 1.0 Capabilities: [5c] Power Management version 1 00: 02 10 4d 4c 87 00 90 02 64 00 00 03 08 20 00 00 10: 00 00 00 fd 01 ec 00 00 00 f0 ff fc 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ab 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 08 00 04:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03) Subsystem: Xircom Cardbus Ethernet 10/100 Flags: medium devsel, IRQ 255 I/O ports at [disabled] Capabilities: [dc] Power Management version 1 00: 5d 11 03 00 00 00 10 02 03 00 00 02 00 00 80 00 10: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 01 00 00 5d 11 81 11 30: 00 00 00 00 dc 00 00 00 00 00 00 00 ff 01 14 28 04:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03) (prog-if 02 [16550]) Subsystem: Xircom CBEM56G-100 Ethernet + 56k Modem Flags: medium devsel, IRQ 255 I/O ports at [disabled] Capabilities: [dc] Power Management version 1 00: 5d 11 03 01 00 00 10 02 03 02 00 07 00 00 80 00 10: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 02 00 00 5d 11 81 11 30: 00 00 00 00 dc 00 00 00 00 00 00 00 ff 01 00 00 dmesg for APM Linux version 2.4.10-da1 (root@radon) (gcc version 2.95.2 19991024 (release)) #1 Wed Nov 21 23:43:52 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fec000 (usable) BIOS-e820: 0000000007fec000 - 0000000007ff0000 (reserved) BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) On node 0 totalpages: 32748 zone(0): 4096 pages. zone(1): 28652 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Kernel command line: BOOT_IMAGE=linux-old ro root=306 vga=0x0301 noinitrd Initializing CPU#0 Detected 430.143 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 858.52 BogoMIPS Memory: 127292k/130992k available (698k kernel code, 3312k reserved, 172k data, 180k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 0a Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 got res[10000000:10000fff] for resource 0 of Texas Instruments PCI1225 got res[10001000:10001fff] for resource 0 of Texas Instruments PCI1225 (#2) Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd devfs: v0.116 (20010919) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured block: 128 slots per queue, batch=16 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHH2064AT, ATA DISK drive hdc: TORiSAN DVD-ROM DRD-U624, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 12685680 sectors (6495 MB) w/512KiB Cache, CHS=789/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p3 < p5 p6 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 180k freed Adding Swap: 136512k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.268 $ time 23:09:52 Nov 21 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:03.0 PCI: Sharing IRQ 11 with 00:03.1 usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF c7a7f200, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: dce0 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c7a7f200 usb-uhci.c: v1.268:USB Universal Host Controller Interface driver apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) PCI: Found IRQ 5 for device 00:08.0 maestro: Configuring ESS Maestro 2E found at IO 0xD800 IRQ 5 maestro: subvendor id: 0x00ab1028 maestro: PCI power management capability: 0x7622 maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf maestro: 1 channels configured. maestro: version 0.15 time 23:09:12 Nov 21 2001 Linux PCMCIA Card Services 3.1.29 kernel build: 2.4.10-da1 #1 Wed Nov 21 23:43:52 GMT 2001 options: [pci] [cardbus] [apm] Intel ISA/PCI/CardBus PCIC probe: PCI: Found IRQ 11 for device 00:03.0 PCI: Sharing IRQ 11 with 00:03.1 PCI: Sharing IRQ 11 with 00:07.2 PCI: Found IRQ 11 for device 00:03.1 PCI: Sharing IRQ 11 with 00:03.0 PCI: Sharing IRQ 11 with 00:07.2 TI 1225 rev 01 PCI-to-CardBus at slot 00:03, mem 0x10000000 host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 2/5] host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 6/9] spurious 8259A interrupt: IRQ7. ISA irqs (scanned) = 3,4,7,10 PCI status changes cs: cb_alloc(bus 2): vendor 0x115d, device 0x0003 ROM image dump: image 0: 0x000000-0x0001ff, signature PCIR isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: No IRQ known for interrupt pin A of device . Please try using pci=biosirq. register_serial(): autoconfig failed cs: cb_config(bus 2) cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0288-0x0377: clean. cs: IO port probe 0x0380-0x03bf: clean. cs: IO port probe 0x03e0-0x04cf: clean. cs: IO port probe 0x04d8-0x04ff: clean. cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f cs: IO port probe 0x0a00-0x0aff: clean. cs: IO port probe 0x0c00-0x0cff: clean. fn 0 bar 2: mem 0x60013000-0x600137ff fn 0 bar 3: mem 0x60012000-0x600127ff fn 1 bar 1: io 0x480-0x487 fn 1 bar 2: mem 0x60011000-0x600117ff fn 1 bar 3: mem 0x60010000-0x600107ff fn 0 bar 1: io 0x400-0x47f fn 0 rom: mem 0x6000c000-0x6000ffff fn 1 rom: mem 0x60008000-0x6000bfff irq 11 cs: cb_enable(bus 2) bridge io map 0 (flags 0x21): 0x400-0x487 bridge mem map 0 (flags 0x1): 0x60008000-0x60013fff tulip_attach(device 02:00.0) tulip.c:v0.91g-ppc 7/16/99 becker@scyld.com (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x400, 00:10:A4:C4:3F:54, IRQ 11. eth0: MII transceiver #0 config 3100 status 7809 advertising 01e1. serial_attach(device 02:00.1) ttyS04 at port 0x0480 (irq = 11) is a 16550A Trying to free nonexistent resource <00000480-00000487> Trying to free nonexistent resource <00000480-00000487> lspci for APM 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Flags: bus master, medium devsel, latency 32 Memory at f4000000 (32-bit, prefetchable) Capabilities: [a0] AGP version 1.0 00: 86 80 90 71 06 01 10 22 03 00 00 06 00 20 00 00 10: 08 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fc000000-feffffff 00: 86 80 91 71 1f 01 20 02 03 00 04 06 00 20 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 e0 e0 a0 22 20: 00 fc f0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00 00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at 10000000 (32-bit, non-prefetchable) Bus: primary=00, secondary=02, subordinate=05, sec-latency=32 Memory window 0: 60008000-60013000 I/O window 0: 00000400-00000487 I/O window 1: 00000000-00000003 16-bit legacy interface ports at 0001 00: 4c 10 1c ac 07 00 10 02 01 00 07 06 08 20 82 00 10: 00 00 00 10 a0 00 00 22 00 02 05 20 00 80 00 60 20: 00 30 01 60 00 00 00 00 00 00 00 00 00 04 00 00 30: 84 04 00 00 00 00 00 00 00 00 00 00 0b 01 00 06 40: 28 10 ab 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at 10001000 (32-bit, non-prefetchable) Bus: primary=00, secondary=06, subordinate=09, sec-latency=32 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 16-bit legacy interface ports at 0001 00: 4c 10 1c ac 07 00 10 02 01 00 07 06 08 20 82 00 10: 00 10 00 10 a0 00 00 02 00 06 09 20 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 c0 07 40: 28 10 ab 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00: 86 80 10 71 0f 01 80 02 02 00 80 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 32 I/O ports at 0860 00: 86 80 11 71 05 00 80 02 01 80 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at dce0 00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: e1 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03) Flags: medium devsel 00: 86 80 13 71 03 00 80 02 03 00 80 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at d800 Capabilities: [c0] Power Management version 2 00: 5d 12 78 19 05 00 90 02 10 00 01 04 00 20 00 00 10: 01 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ab 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 01 02 18 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP 2x (rev 64) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 00ab Flags: bus master, stepping, medium devsel, latency 32, IRQ 11 Memory at fd000000 (32-bit, non-prefetchable) I/O ports at ec00 Memory at fcfff000 (32-bit, non-prefetchable) Capabilities: [50] AGP version 1.0 Capabilities: [5c] Power Management version 1 00: 02 10 4d 4c 87 00 90 02 64 00 00 03 08 20 00 00 10: 00 00 00 fd 01 ec 00 00 00 f0 ff fc 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 ab 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 08 00 02:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03) Subsystem: Xircom Cardbus Ethernet 10/100 Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 0400 Memory at 60013000 (32-bit, non-prefetchable) Memory at 60012000 (32-bit, non-prefetchable) Expansion ROM at 6000c000 Capabilities: [dc] Power Management version 1 00: 5d 11 03 00 07 00 10 02 03 00 00 02 08 40 80 00 10: 01 04 00 00 00 30 01 60 00 20 01 60 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 01 00 00 5d 11 81 11 30: 01 c0 00 60 dc 00 00 00 00 00 00 00 0b 01 14 28 02:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03) (prog-if 02 [16550]) Subsystem: Xircom CBEM56G-100 Ethernet + 56k Modem Flags: medium devsel, IRQ 11 I/O ports at 0480 Memory at 60011000 (32-bit, non-prefetchable) Memory at 60010000 (32-bit, non-prefetchable) Expansion ROM at 60008000 Capabilities: [dc] Power Management version 1 00: 5d 11 03 01 03 00 10 02 03 02 00 07 00 00 80 00 10: 81 04 00 00 00 10 01 60 00 00 01 60 00 00 00 00 20: 00 00 00 00 00 00 00 00 07 02 00 00 5d 11 81 11 30: 01 80 00 60 dc 00 00 00 00 00 00 00 0b 01 00 00 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/