Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932951AbXA1XBh (ORCPT ); Sun, 28 Jan 2007 18:01:37 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932957AbXA1XBh (ORCPT ); Sun, 28 Jan 2007 18:01:37 -0500 Received: from gate.crashing.org ([63.228.1.57]:38408 "EHLO gate.crashing.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932951AbXA1XBg (ORCPT ); Sun, 28 Jan 2007 18:01:36 -0500 Subject: Re: [PATCH] libata-sff: Don't call bmdma_stop on non DMA capable controllers From: Benjamin Herrenschmidt To: Linus Torvalds Cc: Jeff Garzik , David Woodhouse , Alan , Linux Kernel Mailing List In-Reply-To: References: <20070125150905.652f9ce2@localhost.localdomain> <1169741658.3593.98.camel@shinybook.infradead.org> <20070125172739.0c990a9a@localhost.localdomain> <1169770985.3593.146.camel@shinybook.infradead.org> <45B95D3A.10108@pobox.com> Content-Type: text/plain Date: Mon, 29 Jan 2007 10:01:23 +1100 Message-Id: <1170025283.26655.101.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.8.1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2756 Lines: 61 > However, in all honesty, we have triggered bugs in that area too, simply > because some driver code "knew" that PIO addresses could fit in 16 bits, > and used u16 or "unsigned short" to remember the PIO address. Both ARM and > Sparc was bitten by this, although usually the issue is trivial to fix > once found. > > Also, many ISA-only drivers actually have hardcoded PIO numbers (eg > "0x1f0"). > > But yes, I would generally suggest that architectures where the PIO range > is really just another magic MMIO range (which is most of the non-x86 > world, as you point out) might as well at least aim for doing the > remapping early (ie with "pci_resource_start()") > > Making that easy was one of my goals for the "new" IO accessor functions, > in fact. > > Not that many people actually use them. Well, as I said, I prefer keeping PIO numbers 0 based so that legacy crap works. If 0 is to be illegal, then remap any devive that's sitting there, but don't do weirder remapping tricks than necessary ;-) Note that on PowerPC, we do actually remap PIO on non-primary busses (well, we have to since we have to present a flat space to inx/outx). What we do there is basically we "pick" a bus as beeing primary (typically the one that has an ISA bridge and/or SuperIO on it) and that's the one that gets PIO 0. Resources for device on that domain aren't fixed up. All other ones are fixed up in such a way that pointer arithmeric gives you an inx/outx landing in the right spot for PCI devices. > So *if* you use the new "iomap" interfaces, and the new "pci_iomap()" > things, that should actually not just allow drivers (like the ATA layer) > to share much more code between the PIO and MMIO cases, but it hopefully > actually makes it easier for strange architectures to do it all. Yes. Though adoption of iomap is a bit slow on the driver side of things. > So traditionally, we've had PIO be "limited integer addresses, and some > drivers know magic numbers", but hopefully new drivers could at least try > to use some of the infrastructure where we try to help people not have to > deal with it so much as a special case any more. Well, hopefully new drivers don't need PIO as it's about time people stop releasing devices that do PIO, bloody hell ! That should have been "deprecated use for compatibility only" from day #1 :-) In fact, if I'm not mistaken, the PCI spec mandates that device should have an MMIO way of doing everything that can be done via PIO nowadays no ? Ben. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/