From:   Apurva Nandan <a-nandan@ti.com>
To:     Miquel Raynal <miquel.raynal@bootlin.com>,
        Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Mark Brown <broonie@kernel.org>,
        Apurva Nandan <a-nandan@ti.com>,
        Patrice Chotard <patrice.chotard@foss.st.com>,
        Christophe Kerello <christophe.kerello@foss.st.com>,
        Boris Brezillon <boris.brezillon@collabora.com>,
        Daniel Palmer <daniel@0x0f.com>,
        Alexander Lobakin <alobakin@pm.me>,
        <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <linux-spi@vger.kernel.org>
CC:     <p.yadav@ti.com>
Subject: [PATCH v3 02/17] mtd: spinand: Define macros for Octal DTR ops
Date:   Sat, 1 Jan 2022 13:12:35 +0530
Message-ID: <20220101074250.14443-3-a-nandan@ti.com>
In-Reply-To: <20220101074250.14443-1-a-nandan@ti.com>
References: <20220101074250.14443-1-a-nandan@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Define new op templates for reset, write enable, set_feature,
get_feature, block_erase, read/write page operations for Octal DTR SPI
mode. These templates will be used in data_ops and ctrl_ops for
performing all flash operations.

Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 include/linux/mtd/spinand.h | 54 +++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 6988956b8492..69e06e741717 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -26,12 +26,24 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
+#define SPINAND_RESET_OP_OCTAL_DTR					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0xffff, 8),			\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
 #define SPINAND_WR_EN_DIS_OP(enable)					\
 	SPI_MEM_OP(SPI_MEM_OP_CMD((enable) ? 0x06 : 0x04, 1),		\
 		   SPI_MEM_OP_NO_ADDR,					\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
+#define SPINAND_WR_EN_DIS_OP_OCTAL_DTR(enable)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, (enable) ? 0x0606 : 0x0404, 8),\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
 #define SPINAND_READID_OP(naddr, ndummy, buf, len)			\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1),				\
 		   SPI_MEM_OP_ADDR(naddr, 0, 1),			\
@@ -44,24 +56,48 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_DATA_OUT(1, valptr, 1))
 
+#define SPINAND_SET_FEATURE_OP_OCTAL_DTR(reg, valptr)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x1f1f, 8),			\
+		   SPI_MEM_OP_ADDR_DTR(2, reg, 8),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT_DTR(2, valptr, 8))
+
 #define SPINAND_GET_FEATURE_OP(reg, valptr)				\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x0f, 1),				\
 		   SPI_MEM_OP_ADDR(1, reg, 1),				\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_DATA_IN(1, valptr, 1))
 
+#define SPINAND_GET_FEATURE_OP_OCTAL_DTR(reg, valptr)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x0f0f, 8),			\
+		   SPI_MEM_OP_ADDR_DTR(2, reg, 8),			\
+		   SPI_MEM_OP_DUMMY_DTR(14, 8),				\
+		   SPI_MEM_OP_DATA_IN_DTR(2, valptr, 8))
+
 #define SPINAND_BLK_ERASE_OP(addr)					\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0xd8, 1),				\
 		   SPI_MEM_OP_ADDR(3, addr, 1),				\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
+#define SPINAND_BLK_ERASE_OP_OCTAL_DTR(addr)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0xd8d8, 8),			\
+		   SPI_MEM_OP_ADDR_DTR(2, addr, 8),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
 #define SPINAND_PAGE_READ_OP(addr)					\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x13, 1),				\
 		   SPI_MEM_OP_ADDR(3, addr, 1),				\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
+#define SPINAND_PAGE_READ_OP_OCTAL_DTR(addr)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x1313, 8),			\
+		   SPI_MEM_OP_ADDR_DTR(2, addr, 8),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
 #define SPINAND_PAGE_READ_FROM_CACHE_OP(fast, addr, ndummy, buf, len)	\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
 		   SPI_MEM_OP_ADDR(2, addr, 1),				\
@@ -122,12 +158,24 @@
 		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
 		   SPI_MEM_OP_DATA_IN(len, buf, 4))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(addr, ndummy, buf, len) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x9d9d, 8),			\
+		   SPI_MEM_OP_ADDR_DTR(2, addr, 8),			\
+		   SPI_MEM_OP_DUMMY_DTR(ndummy, 8),			\
+		   SPI_MEM_OP_DATA_IN_DTR(len, buf, 8))
+
 #define SPINAND_PROG_EXEC_OP(addr)					\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
 		   SPI_MEM_OP_ADDR(3, addr, 1),				\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
+#define SPINAND_PROG_EXEC_OP_OCTAL_DTR(addr)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, 0x1010, 8),			\
+		   SPI_MEM_OP_ADDR_DTR(2, addr, 8),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
 #define SPINAND_PROG_LOAD(reset, addr, buf, len)			\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x02 : 0x84, 1),		\
 		   SPI_MEM_OP_ADDR(2, addr, 1),				\
@@ -140,6 +188,12 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_DATA_OUT(len, buf, 4))
 
+#define SPINAND_PROG_LOAD_OCTALIO_DTR(reset, addr, buf, len)		\
+	SPI_MEM_OP(SPI_MEM_OP_CMD_DTR(2, reset ? 0x0202 : 0x8484, 8),	\
+		   SPI_MEM_OP_ADDR_DTR(2, addr, 8),			\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT_DTR(len, buf, 8))
+
 /**
  * Standard SPI NAND flash commands
  */
-- 
2.25.1